A review on tailored blanks—Production, applications and evaluation

[1]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[2]  Taylan Altan,et al.  Deep drawing of round cups from tailor-welded blanks , 1995 .

[3]  R. H. Wagoner,et al.  Forming of tailor-welded blanks , 1996 .

[4]  J. Bryant,et al.  Aluminum and magnesium for automotive applications , 1996 .

[5]  J. S. Baron,et al.  A cost comparison of weld technologies for tailor welded blanks , 1997 .

[6]  Hisashi Kusuda,et al.  Formability of tailored blanks , 1997 .

[7]  P. Magain,et al.  The Patchwork Technique for Proper Material Placement on Panels: Industrial Application on the New Peugeot 206 , 1998 .

[8]  Choong-Ho Lee,et al.  Optimum design of tailor welded blanks in sheet metal forming processes by inverse finite element analysis , 1998 .

[9]  F. Vollertsen,et al.  Enhancement of Drawability by Local Heat Treatment , 1998 .

[10]  G. A. Edwards,et al.  The precipitation sequence in Al–Mg–Si alloys , 1998 .

[11]  J. Huetink,et al.  Deep drawing simulations of Tailored Blanks and experimental verification , 1998 .

[12]  R. Davies,et al.  Characterizing Al tailor-welded blanks for automotive applications , 1999 .

[13]  G. Kridli,et al.  Microstructural and mechanical investigation of aluminum tailor-welded blanks , 2000 .

[14]  Jian Cao,et al.  A novel forming technology for tailor-welded blanks , 2000 .

[15]  M. Khaleel,et al.  Weld metal ductility in aluminum tailor welded blanks , 2000 .

[16]  K. B. Min,et al.  A study on resistance welding in steel sheets using a tailor-welded blank (1st report) , 2000 .

[17]  Naksoo Kim,et al.  Forming and drawing characteristics of tailor welded sheets in a circular drawbead , 2000 .

[18]  K. M. Zhao,et al.  Finite element analysis of tailor-welded blanks , 2001 .

[19]  M. Khaleel,et al.  Forming-limit diagrams of aluminum tailor-welded blank weld material , 2001 .

[20]  S. Delfanne,et al.  Patchworks: from design to manufacture , 2001 .

[21]  Youngmoo Heo,et al.  Characteristics of weld line movements for the deep drawing with drawbeads of tailor-welded blanks , 2001 .

[22]  Robert John Lark,et al.  The use of tailored blanks in the manufacture of construction components , 2001 .

[23]  J. Jeswiet,et al.  Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures , 2001 .

[24]  Brian Rooks,et al.  Tailor‐welded blanks bring multiple benefits to car design , 2001 .

[25]  Jian Cao,et al.  Forming of Aluminum Tailor Welded Blanks , 2001 .

[26]  H. Shakeri,et al.  Study of damage initiation and fracture in aluminum tailor welded blanks made via different welding techniques , 2002 .

[27]  R. Davies,et al.  Mechanical properties of aluminum tailor welded blanks at superplastic temperatures , 2002 .

[28]  P. Wild,et al.  Magnetic flux leakage inspection of tailor-welded blanks , 2002 .

[29]  A. Klaus,et al.  Manufacturing of Lightweight Components by Metal Forming , 2003 .

[30]  P. Friedman,et al.  Failure Prediction of Aluminum Laser-Welded Blanks , 2003 .

[31]  Tai-chiu Lee,et al.  Tailor-welded blanks of different thickness ratios effects on forming limit diagrams ☆ , 2003 .

[32]  M. Geiger,et al.  Finite Element Simulation of Deep Drawing of Tailored Heat Treated Blanks , 2004 .

[33]  H. M. Jiang,et al.  Numerical simulation and experimental verification in the use of tailor-welded blanks in the multi-stage stamping process , 2004 .

[34]  J. Jeswiet,et al.  Neutron diffraction residual stress mapping in same gauge and differential gauge tailor-welded blanks , 2004 .

[35]  P. Wild,et al.  On modeling of the weld line in finite element analyses of tailor-welded blank forming operations , 2004 .

[36]  B. Kinsey,et al.  A methodology to reduce and quantify wrinkling in Tailor Welded Blank forming , 2004 .

[37]  Matthias Kleiner,et al.  High-Pressure Sheet Metal Forming of Large Scale Structures from Sheets with Optimised Thickness Distribution , 2005 .

[38]  R. Kopp,et al.  Flexibly Rolled Sheet Metal and Its Use in Sheet Metal Forming , 2005 .

[39]  K. V. Putten,et al.  Computer Aided Product Optimization of High‐Pressure Sheet Metal Formed Tailor Rolled Blanks , 2005 .

[40]  R. Krux,et al.  Properties of Large‐Scale Structure Workpieces in High‐Pressure Sheet Metal Forming of Tailor Rolled Blanks , 2005 .

[41]  Manfred Geiger,et al.  Characterisation of the forming behaviour of patchwork blanks , 2005 .

[42]  A. K. Pilkey,et al.  Influence of welding defects on the localization behaviour of an aluminum alloy tailor-welded blank , 2005 .

[43]  Manfred Geiger,et al.  Hydroforming Of Patchwork Blanks — Numerical Modeling And Experimental Validation , 2005 .

[44]  Gerhard Hirt,et al.  MANUFACTURING OF SHEET METAL PARTS FROM TAILOR ROLLED BLANKS , 2005 .

[45]  Manfred Geiger,et al.  Experimental and Numerical Investigation of the Formability of Laser Welded Patchwork Blanks , 2005 .

[46]  L. Chan,et al.  Damage-based Formability Analysis for TWBs , 2005 .

[47]  F. Vollertsen,et al.  Analytical model for free form radii after deep and stretch drawing using pressurised membranes , 2006 .

[48]  Dongok Kim,et al.  Study of residual stresses in tailor rolled blanked Al5J32-T4 sheets , 2006 .

[49]  S. Bhole,et al.  Formability and Fatigue Behavior of Tailor (Laser) Welded Blanks for Automotive Applications , 2006 .

[50]  Reiner Kopp,et al.  Air Bending Process for Load Optimised Profiles , 2006 .

[51]  Reiner Kopp,et al.  Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks , 2006 .

[52]  Matthias Kleiner,et al.  Metal forming techniques for lightweight construction , 2006 .

[53]  Jun Zhang,et al.  Optimization of contact forces in tailor-welded blanks forming process , 2007 .

[54]  M. Kleiner,et al.  Manufacturing of Profiles for Lightweight Structures , 2007 .

[55]  M. Geiger,et al.  Sheet Metal Forming - A New Kind of Forge for the Future , 2007 .

[56]  A. A. Zadpoor,et al.  Mechanics of Tailor Welded Blanks: An Overview , 2007 .

[57]  R. Padmanabhan,et al.  Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks , 2007 .

[58]  L. Chan,et al.  Weldment properties evaluation and formability study of tailor-welded blanks of different thickness combinations and welding orientations , 2007 .

[59]  L. Fratini,et al.  Improving friction stir welding of blanks of different thicknesses , 2007 .

[60]  M. Merklein,et al.  Investigations on the Mechanical Properties and Formability of Friction Stir Welded Tailored Blanks , 2007 .

[61]  Kari Mäntyjärvi,et al.  Laser-Assisted Bending , 2007 .

[62]  D. R. Kumar,et al.  Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming , 2007 .

[63]  X. Qiu,et al.  The study on numerical simulation of the laser tailor welded blanks stamping , 2007 .

[64]  P. Pothuraju,et al.  Multidisciplinary design optimization on vehicle tailor rolled blank design , 2008 .

[65]  R. M. Natal Jorge,et al.  Simulation of dissimilar tailor-welded tubular hydroforming processes using EAS-based solid finite elements , 2008 .

[66]  Gerhard Hirt,et al.  Production of blanks with thickness transitions in longitudinal and lateral direction through 3D-Strip Profile Rolling , 2008 .

[67]  A. A. Zadpoor,et al.  Mechanical properties and microstructure of friction stir welded tailor-made blanks , 2008 .

[68]  U. Vogt.  Design principles of tailored heat treated blanks for the manufacturing of complex car body parts , 2008 .

[69]  B. Yilbas,et al.  Comparative study: Mechanical and metallurgical aspects of tailored welded blanks (TWBs) , 2008 .

[70]  Alexander Meyer,et al.  Increasing of the drawing depth using tailor rolled blanks—Numerical and experimental analysis , 2008 .

[71]  Manfred Geiger,et al.  An inverse approach to the numerical design of the process sequence of tailored heat treated blanks , 2008, Prod. Eng..

[72]  J. Lütjens,et al.  Simulationsgestützte Optimierung von Partiell Gehärteten Automobilteilen aus Mehrphasen-Stahl* , 2008 .

[73]  D. R. Kumar,et al.  Improvement in formability of tailor welded blanks by application of counter pressure in biaxial stretch forming , 2008 .

[74]  H. Streitberger,et al.  Automotive Paints and Coatings , 2008 .

[75]  A. A. Zadpoor,et al.  Finite element modeling and failure prediction of friction stir welded blanks , 2009 .

[76]  Jean-Marc Roelandt,et al.  Experimental and numerical assessment of Tailor-Welded Blanks formability , 2009 .

[77]  Reinhart Poprawe,et al.  Local laser heat treatment of ultra high strength steels to improve formability , 2009, Prod. Eng..

[78]  Amir A. Zadpoor,et al.  Tailor made blanks for the aerospace industry , 2010 .

[79]  M. Asadi,et al.  Designing Local Properties of Constructional Elements by Local Use of Ageing Effects in Multiphase Steels , 2010 .

[80]  R. G. Narayanan,et al.  Assessing the Validity of Original and Modified Failure Criteria to Predict the Forming Limit of Unwelded and Tailor Welded Blanks with Longitudinal Weld , 2010 .

[81]  Hyoung-Wook Kim,et al.  Annealing of flexible-rolled Al–5.5 wt%Mg alloy sheets for auto body application , 2010 .

[82]  K. Wissenbach,et al.  Improvement of formability and performance of coated ultra-high-strength steels by local heat treatment using a high power diode laser , 2010 .

[83]  K. Osakada,et al.  Plate forging of tailored blanks having local thickening for deep drawing of square cups , 2011 .

[84]  M. Abbasi,et al.  Formability Enhancement of Galvanized IF-Steel TWB by Modification of Forming Parameters , 2012, Journal of Materials Engineering and Performance.

[85]  Peter Groche,et al.  On the Development of Novel Light Weight Profiles for Automotive Industries by Roll Forming of Tailor Rolled Blanks , 2011 .

[86]  Can Huang,et al.  Optimization to Control Parameters on Rolling of Tailor Rolling Blanks by Orthogonal Test , 2011 .

[87]  Ronald Sanders,et al.  Comparisons of Current Concepts for Press Hardened Steel Tailor Welded Blanks and Tailor Rolled Blanks on Center Pillar Reinforcements , 2011 .

[88]  Can Huang,et al.  Shape Rolling Simulation of Tailor Rolled Blanks Based on Deform-3D , 2011 .

[89]  Julian M. Allwood,et al.  Sustainable Materials - With Both Eyes Open , 2012 .

[90]  Peter Groche,et al.  Tailored Profiles Made of Tailor Rolled Strips by Roll Forming – Part 2 of 2 , 2012 .

[91]  M. Merklein,et al.  Tailoring Material Properties of Aluminum by Local Laser Heat Treatment , 2012 .

[92]  L. F. Silva,et al.  Structural Connections for Lightweight Metallic Structures , 2012 .

[93]  J. Duflou,et al.  Bending properties of locally laser heat treated AA2024-T3 aluminium alloy , 2012 .

[94]  Gerhard Hirt,et al.  Tailored Profiles Made of Tailor Rolled Strips by Roll Forming – Part 1 of 2 , 2012 .

[95]  Georg Bergweiler,et al.  Local heat treatment of high strength steels with zoom-optics and 10kW-diode laser , 2012, LASE.