Relationships between microhardness, microstructure, and grain orientation in laser-welded joints with different welding speeds for Ti6Al4V titanium alloy

[1]  S. Gong,et al.  Effect of α texture on the tensile deformation behavior of Ti–6Al–4V alloy produced via electron beam rapid manufacturing , 2019, Materials Science and Engineering: A.

[2]  P. Åkerfeldt,et al.  Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction , 2018, Additive Manufacturing.

[3]  K. S. Bindra,et al.  Comparison of bead shape, microstructure and mechanical properties of fiber laser beam welding of 2 mm thick plates of Ti-6Al-4V alloy , 2018, Optics & Laser Technology.

[4]  S. Chattopadhyaya,et al.  Experimental and Numerical Assessment of Temperature Field and Analysis of Microstructure and Mechanical Properties of Low Power Laser Annealed Welded Joints , 2018, Materials.

[5]  Peiyue Li,et al.  The effect of constraint conditions on microstructure and properties of titanium alloy electron beam welding , 2018 .

[6]  Massab Junaid,et al.  Study of microstructure, mechanical properties and residual stresses in full penetration electron beam welded Ti-5Al-2.5Sn alloy sheet , 2018 .

[7]  S. Abbasi,et al.  The role of initial α-phase orientation on tensile and strain hardening behavior of Ti-6Al-4V alloy , 2017 .

[8]  Yanjin Lu,et al.  Crystallographic features of α variants and β phase for Ti-6Al-4V alloy fabricated by selective laser melting , 2017 .

[9]  B. Klusemann,et al.  Fiber laser welding of dissimilar titanium (Ti-6Al-4V/cp-Ti) T-joints and their laser forming process for aircraft application , 2017 .

[10]  J. Eckert,et al.  Friction welding of selective laser melted Ti6Al4V parts , 2017 .

[11]  N. Kashaev,et al.  Microstructure and mechanical performance of autogenously fibre laser beam welded Ti-6242 butt joints , 2017 .

[12]  A. Zhang,et al.  Microstructure and mechanical properties of Ti6Al4V alloy prepared by selective laser melting combined with precision forging , 2017 .

[13]  Óscar Carvalho,et al.  Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting , 2017 .

[14]  Julfikar Haider,et al.  A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheet , 2017 .

[15]  M. Brandt,et al.  In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance , 2017 .

[16]  N. Hrabe,et al.  Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress , 2017 .

[17]  Qing Liu,et al.  Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding , 2016 .

[18]  Yung C. Shin,et al.  Analysis of microstructure and mechanical properties change in laser welding of Ti6Al4V with a multiphysics prediction model , 2016 .

[19]  Nikolai Kashaev,et al.  Effect of Nd:YAG laser beam welding on weld morphology and mechanical properties of Ti–6Al–4V butt joints and T-joints , 2016 .

[20]  J. Dear,et al.  Parametric optimisation and microstructural analysis on high power Yb-fibre laser welding of Ti–6Al–4V , 2016 .

[21]  Zemin Wang,et al.  Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting , 2016 .

[22]  N. Kashaev,et al.  Influence of crystallographic texture on the microstructure, tensile properties and residual stress state of laser-welded titanium joints , 2016 .

[23]  Yanjin Lu,et al.  Microstructural evolution and microhardness of a selective-laser-melted Ti–6Al–4V alloy after post heat treatments , 2016 .

[24]  L. Murr,et al.  Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting , 2016 .

[25]  Brent Stucker,et al.  Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting , 2015 .

[26]  S. Pityana,et al.  Microstructure, hardness and corrosion properties of laser processed Ti6Al4V-based composites , 2015 .

[27]  Jianxun Zhang,et al.  Effects of the Heterogeneity in the Electron Beam Welded Joint on Mechanical Properties of Ti6Al4V Alloy , 2014, Journal of Materials Engineering and Performance.

[28]  C. Zhang,et al.  Microstructure characterization of laser welded Ti-6Al-4V fusion zones , 2014 .

[29]  B. Stucker,et al.  Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013, Journal of Materials Engineering and Performance.

[30]  Jianxun Zhang,et al.  A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate , 2013 .

[31]  Shaogang Wang,et al.  Investigation on the microstructure and mechanical properties of Ti–6Al–4V alloy joints with electron beam welding , 2012 .

[32]  Jianxun Zhang,et al.  Microstructural evolution of fusion zone in laser beam welds of pure titanium , 2012 .

[33]  Zhang Jianxun,et al.  Investigation into plastic damage behavior of the CO2 laser deep penetration welded joint for Ti–6Al–4V alloy , 2012 .

[34]  Christoph Leyens,et al.  Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM) , 2012 .

[35]  K. Nakata,et al.  Microstructural characteristics and mechanical properties in laser beam welds of Ti6Al4V alloy , 2012, Journal of Materials Science.

[36]  Eleanor Merson,et al.  Microstructural and microtextural analysis of InterPulse GTCAW welds in Cp-Ti and Ti―6Al―4V , 2010 .

[37]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[38]  Mohammad Jahazi,et al.  Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser , 2009 .

[39]  T. Sınmazçelik,et al.  Laser welding of Ti6Al4V titanium alloys , 2009 .

[40]  J. I. Qazi,et al.  Titanium alloys for biomedical applications , 2006 .

[41]  Giuseppe Casalino,et al.  Investigation on Ti6Al4V laser welding using statistical and Taguchi approaches , 2005 .

[42]  H. J. Rack,et al.  Phase transformations during cooling in α+β titanium alloys , 1998 .

[43]  L. W. Tsay,et al.  The effect of microstructures on the fatigue crack growth in Ti_6Al_4V laser welds , 1997 .

[44]  M. Peters,et al.  Effects of thermomechanical treatment on microstructure and mechanical properties of blended elemental Ti-6Al-4V compacts , 1988 .