Thermal contact conductance between additively manufactured carbon fiber reinforced thermoplastic composite: An experimental study

[1]  K. Xie,et al.  Heat and mass transfer mechanism and control strategy of clean low carbon combustion technology in the novel-type coke oven flue with MILD combustion , 2022, Fuel.

[2]  Hong Xiao,et al.  Effect of porosity and crystallinity on mechanical properties of laser in-situ consolidation thermoplastic composites , 2022, Polymer.

[3]  S. Liao,et al.  Ultrasonic welding of fiber reinforced thermoplastic composites: Current understanding and challenges , 2021 .

[4]  C. Gandin,et al.  A simple and efficient numerical model for thermal contact resistance based on diffuse interface immersed boundary method , 2021 .

[5]  M. Al-Haik,et al.  Mechanical characterization of additively manufactured fiber-reinforced composites , 2021, Aerospace Science and Technology.

[6]  W. Tao,et al.  Numerical study on thermal contact resistance of 8-harness satin woven pierced composite , 2021, International Journal of Thermal Sciences.

[7]  A. Elkholy,et al.  Enhancement of pool boiling heat transfer using 3D-printed polymer fixtures , 2020 .

[8]  Huanxin Chen,et al.  Effects of thermal conductivity on the thermal contact resistance between non-conforming rough surfaces: An experimental and modeling study , 2020 .

[9]  Yulong Ding,et al.  A comparative investigation on the effect of different nanofluids on the thermal performance of two-phase closed thermosyphon , 2020, International Journal of Heat and Mass Transfer.

[10]  L. Govaert,et al.  Influence of post-condensation on the crystallization kinetics of PA12: From virgin to reused powder , 2019, Polymer.

[11]  Peng Zhang,et al.  Experimental study of thermal contact resistance between aluminium alloy and ADP crystal under vacuum environment , 2019, Applied Thermal Engineering.

[12]  C. Yan,et al.  A 2D correlation infrared spectroscopic study on the temperature-induced molecular motion mechanism concerning self-formed composite structure of 3D printed PA6 , 2019, Polymer.

[13]  J. Hurley,et al.  Design considerations and modeling of fiber reinforced 3D printed parts , 2019, Composites Part B: Engineering.

[14]  W. Tao,et al.  A test-validated prediction model of thermal contact resistance for Ti-6Al-4V alloy , 2018, Applied Energy.

[15]  Qiang Li,et al.  Effect of surface roughness on thermal contact resistance of aluminium alloy , 2017 .

[16]  X. Xia,et al.  Experimental investigations on temperature-dependent effective thermal conductivity of nanoporous silica aerogel composite , 2017 .

[17]  Liu Shanjian,et al.  Measurement of thermal diffusivity/thermal contact resistance using laser photothermal method at cryogenic temperatures , 2017 .

[18]  Yanzhong Li,et al.  Measurements of interfacial thermal contact conductance between pressed alloys at low temperatures , 2016 .

[19]  Weifang Zhang,et al.  The effect of pressure on thermal contact conductance of superalloys under high temperature , 2016 .

[20]  Duckjong Kim,et al.  Ultrahigh Thermal Conductivity of Interface Materials by Silver‐Functionalized Carbon Nanotube Phonon Conduits , 2016, Advanced materials.

[21]  Xunliang Liu,et al.  Effects of contact pressure, interface temperature, and surface roughness on thermal contact conductance between stainless steel surfaces under atmosphere condition , 2016 .

[22]  Weifang Zhang,et al.  Influencing factors of thermal contact conductance between TC4/30CrMnSi interfaces , 2015 .

[23]  Rongshun Wang,et al.  Experimental investigation of thermal contact conductance across GFRP–GFRP joint , 2014, Heat and Mass Transfer.

[24]  Y. Xuan,et al.  Characterization and application of engineered regular rough surfaces in thermal contact resistance , 2014 .

[25]  L. Shao,et al.  Molecular dynamics simulations of grain boundary thermal resistance in UO2 , 2014 .

[26]  Qiang Li,et al.  Thermal contact resistance of epoxy composites incorporated with nano-copper particles and the multi-walled carbon nanotubes , 2014 .

[27]  H. Wagner,et al.  Fracture behavior of nanotube–polymer composites: Insights on surface roughness and failure mechanism , 2013 .

[28]  D. Wu,et al.  Self-healing polymeric materials: A review of recent developments , 2008 .

[29]  Mica Grujicic,et al.  The effect of thermal contact resistance on heat management in the electronic packaging , 2005 .

[30]  W. D. Griffiths,et al.  A model of the interfacial heat-transfer coefficient for the aluminum gravity die-casting process , 2004 .

[31]  Chih-Yung Wen,et al.  Measurement of thermal contact resistance of aluminum honeycombs , 2003 .

[32]  R. L. Webb,et al.  Apparatus for accurate measurement of interface resistance of high performance thermal interface materials , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[33]  Egidio Marotta,et al.  Thermal Contact Conductance of Metal/Polymer Joints: An Analytical and Experimental Investigation , 2001 .

[34]  Leroy S. Fletcher,et al.  Thermal contact conductance of selected polymeric materials , 1996 .

[35]  T. R. Thomas,et al.  Extrapolation Errors in Thermal Contact Resistance Measurements , 1975 .

[36]  M. Cooper,et al.  Thermal contact conductance , 1969 .

[37]  Tian Zhou,et al.  Fundamental and estimation of thermal contact resistance between polymer matrix composites: A review , 2022, International Journal of Heat and Mass Transfer.

[38]  Qiang Li,et al.  Numerical prediction of high temperature thermal contact resistance of HTA–C/ZrB2-SiC with radiation effects , 2021 .

[39]  Lars Pejryd,et al.  Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering , 2016 .

[40]  E. García-Plaza,et al.  Dimensional and Surface Texture Characterization in Fused Deposition Modelling (FDM) with ABS plus , 2015 .

[41]  Guohong Zhang,et al.  Interdiffusion analysis based on novel ultrasonic welding method with inserting interposed sheet , 2011 .

[42]  Michael R. Kessler,et al.  Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair , 2007 .

[43]  Jacques Cognard,et al.  Some recent progress in adhesion technology and science , 2006 .

[44]  L. Fletcher,et al.  Effective Thermal Conductivity and Thermal Contact Conductance of Graphite Fiber Composites , 2001 .

[45]  Leroy S. Fletcher,et al.  Review of Models for Thermal Contact Conductance of Metals , 1997 .