Experimental air heat transfer and pressure drop through copper foams

Abstract This paper presents experimental heat transfer coefficient and pressure drop measurements carried out during air forced convection through five different copper foam samples. The specimens present a different number of pores per inch: 5, 10, 20, and 40 PPI and different porosities, which vary between 0.905 and 0.934. The tests were run by varying the air mass flow rate in the range between 0.006 and 0.012 kg s −1 , which corresponds to the air frontal velocity from 2.5 to 5 m s −1 . Two different heat fluxes, imposed by means of an electrical heater were investigated: 25.0 and 32.5 kW m −2 . The collected heat transfer and pressure drop data were analyzed to obtain the global heat transfer coefficient, the normalized mean wall temperature, the pressure gradient, permeability, inertia coefficient, and drag coefficient. The experimental heat transfer measurements reported in the present work increase the knowledge in heat transfer and fluid flow in metal foams.

[1]  B. Kang,et al.  Forced convection from aluminum foam materials in an asymmetrically heated channel , 2001 .

[2]  K. Leong,et al.  Convective Heat Transfer in Graphite Foam Heat Sinks With Baffle and Stagger Structures , 2011 .

[3]  Brian E. Thompson,et al.  Carbon-foam finned tubes in air¿water heat exchangers , 2006 .

[4]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: pressure drop , 2000 .

[5]  Enrico Tronconi,et al.  Heat Transfer Characterization of Metallic Foams , 2005 .

[6]  H.Y. Zhang,et al.  Fluid flow and heat transfer in liquid cooled foam heat sinks for electronic packages , 2005, IEEE Transactions on Components and Packaging Technologies.

[7]  H. Hangan,et al.  Thermal characterization of porous carbon foam—convection in parallel flow , 2006 .

[8]  M. Meyer,et al.  Hydrodynamic and mass transfer efficiency of ceramic foam packing applied to distillation , 2009 .

[9]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[10]  R. Mahajan,et al.  Forced Convection in High Porosity Metal Foams , 2000 .

[11]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[12]  N. Celi̇k,et al.  Experimental investigation of forced and mixed convection heat transfer in a foam-filled horizontal rectangular channel , 2009 .

[13]  M. Velez-Reyes,et al.  One-dimensional heat transfer analysis in open-cell 10-ppi metal foam , 2005 .

[14]  A. Cavallini,et al.  Air Flow in Aluminum Foam: Heat Transfer and Pressure Drops Measurements , 2009 .

[15]  Thermal transport in cellular metal foams with open cells , 2003 .

[16]  R. Mei,et al.  Performance of Aluminum and Carbon Foams for Air Side Heat Transfer Augmentation , 2010 .

[17]  R. Viskanta,et al.  Experimental determination of the volumetric heat transfer coefficient between stream of air and ceramic foam , 1993 .

[18]  Claudio Zilio,et al.  Pressure drop during air flow in aluminum foams , 2010 .

[19]  A. Cavallini,et al.  Heat Transfer Performance of Aluminum Foams , 2011 .

[20]  D. Poulikakos,et al.  The Effects of Compression and Pore Size Variations on the Liquid Flow Characteristics in Metal Foams , 2002 .

[21]  J. Y. Wu,et al.  Experimental investigation of heat-transfer characteristics of aluminum-foam heat sinks , 2004 .

[22]  Kye-Bock Lee,et al.  Pressure loss and forced convective heat transfer in an annulus filled with aluminum foam , 2006 .

[23]  Changying Zhao,et al.  Thermal Transport in High Porosity Cellular Metal Foams , 2004 .

[24]  L. Chow,et al.  Experimental Study on Heat Transfer and Pressure Drop of Recuperative Heat Exchangers Using Carbon Foam , 2010 .

[25]  Bettina Kraushaar-Czarnetzki,et al.  Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities , 2008 .

[26]  Jenn-Jiang Hwang,et al.  Measurement of interstitial convective heat transfer and frictional drag for flow across metal foams , 2002 .

[27]  An experimental study on thermal transport in lightweight metal foams at high Reynolds numbers , 2002 .

[28]  Dimos Poulikakos,et al.  Metal foams as compact high performance heat exchangers , 2003 .

[29]  J. Gore,et al.  Measurement and correlation of volumetric heat transfer coefficients of cellular ceramics , 1998 .

[30]  L. Chow,et al.  Evaluation of Compact and Effective Air-Cooled Carbon Foam Heat Sink , 2011 .

[31]  A. Bensely,et al.  Experimental Investigation on Pressure Drop and Heat Transfer Characteristics of Copper Metal Foam Heat Sink , 2010 .

[32]  Claudio Zilio,et al.  Heat transfer during air flow in aluminum foams , 2010 .

[33]  N. Dukhan,et al.  Heat transfer measurements in metal foam subjected to constant heat flux , 2007 .

[34]  James W. Klett,et al.  Carbon foams for thermal management , 2003 .