Flexible Multi‐Material Fibers for Distributed Pressure and Temperature Sensing

With the recent development of wearable electronics and smart textiles, flexible sensor technology is gaining increasing attention. Compared to flexible film‐based sensors, multimaterial fiber‐based technology offers unique advantages due to the breathability, durability, wear resistance, and stretchability in fabric structures. Despite the significant progress made in the fabrication and application of fiber‐based sensors, none of the existing fiber technologies allow for fully distributed pressure or temperature sensing. Herein, the design and fabrication of thermally drawn multi‐material fibers that offer distributed temperature and pressure measurement capability is reported. Thermoplastic materials, thermoplastic elastomers, and metal electrodes are successfully co‐drawn in one fiber. The embedded electrodes inside the fibers form a parallel wire transmission line, and the local characteristic impedance is designed to change with the temperature or pressure. The electrical frequency domain reflectometry is used to interrogate the impedance change along the fiber and provides information with high spatial resolution. The two types of fibers reported in this manuscript have a pressure sensitivity of 4 kPa and a temperature sensitivity of 2 °C, respectively. This work can pave the road for development of functional fibers and textiles for pressure and temperature mapping.

[1]  Lei Wei,et al.  Advanced Multimaterial Electronic and Optoelectronic Fibers and Textiles , 2018, Advanced materials.

[2]  Yoel Fink,et al.  Diode fibres for fabric-based optical communications , 2018, Nature.

[3]  René M Rossi,et al.  Superelastic Multimaterial Electronic and Photonic Fibers and Devices via Thermal Drawing , 2018, Advanced materials.

[4]  J. Joannopoulos,et al.  Electrostrictive microelectromechanical fibres and textiles , 2017, Nature Communications.

[5]  Lili Wang,et al.  Ultrasensitive and ultraflexible e-skins with dual functionalities for wearable electronics , 2017 .

[6]  Fabien Sorin,et al.  Multi-material micro-electromechanical fibers with bendable functional domains , 2017 .

[7]  X. Jia,et al.  One-Step Optogenetics with Multifunctional Flexible Polymer Fibers , 2017, Nature Neuroscience.

[8]  Anbo Wang,et al.  High-Speed Distributed Sensing Based on Ultra Weak FBGs and Chromatic Dispersion , 2016, IEEE Photonics Technology Letters.

[9]  Jie Huang,et al.  Interferogram Reconstruction of Cascaded Coaxial Cable Fabry-Perot Interferometers for Distributed Sensing Application , 2016, IEEE Sensors Journal.

[10]  I. Park,et al.  Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review , 2016 .

[11]  Christina M. Tringides,et al.  Multifunctional fibers for simultaneous optical, electrical and chemical interrogation of neural circuits in vivo , 2015, Nature Biotechnology.

[12]  Romeo Bernini,et al.  Distributed Temperature Sensing in Polymer Optical Fiber by BOFDA , 2014, IEEE Photonics Technology Letters.

[13]  Takayuki Yamada,et al.  Precise location of the excessive temperature points in polymer insulated cables , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[14]  J. Joannopoulos,et al.  Chemical Sensing: All‐in‐Fiber Chemical Sensing (Adv. Mater. 45/2012) , 2012 .

[15]  Bo Dong,et al.  A Large Serial Time-Division Multiplexed Fiber Bragg Grating Sensor Network , 2012, Journal of Lightwave Technology.

[16]  K. Hata,et al.  A stretchable carbon nanotube strain sensor for human-motion detection. , 2011, Nature nanotechnology.

[17]  J D Joannopoulos,et al.  Multimaterial piezoelectric fibres. , 2010, Nature materials.

[18]  K. Krebber,et al.  Polymer Optical Fiber Sensors for Distributed Strain Measurement and Application in Structural Health Monitoring , 2009, IEEE Sensors Journal.

[19]  O. Shapira,et al.  Towards multimaterial multifunctional fibres that see, hear, sense and communicate. , 2007, Nature materials.

[20]  Ofer Shapira,et al.  Large-scale optical-field measurements with geometric fibre constructs , 2006, Nature materials.

[21]  Ayman F. Abouraddy,et al.  Thermal‐Sensing Fiber Devices by Multimaterial Codrawing , 2006 .

[22]  You Chung Chung,et al.  Application of phase detection frequency domain reflectometry for locating faults in an F-18 flight control harness , 2005, IEEE Transactions on Electromagnetic Compatibility.

[23]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.

[24]  Ayman F. Abouraddy,et al.  Metal–insulator–semiconductor optoelectronic fibres , 2004, Nature.

[25]  Cynthia Furse,et al.  Frequency-domain reflectometry for on-board testing of aging aircraft wiring , 2003 .

[26]  Burak Temelkuran,et al.  External Reflection from Omnidirectional Dielectric Mirror Fibers , 2002, Science.

[27]  V. Svorcik,et al.  Permittivity of polyethylene and polyethyleneterephtalate , 2000 .

[28]  Winn,et al.  A dielectric omnidirectional reflector , 1998, Science.

[29]  Charles H. Dowding,et al.  Early detection of rock movement with time domain reflectometry , 1994 .

[30]  M. P. Gold,et al.  Distributed temperature sensing in solid-core fibres , 1985 .

[31]  B. Clegg,et al.  Modern cable-fault-location methods , 1975 .

[32]  Handbook of Polymers , 2022 .

[33]  Ayman F. Abouraddy,et al.  Multimaterial Fibers , 2022 .

[34]  C. H. Dowding,et al.  Measurement of rock mass deformation with grouted coaxial antenna cables , 1989 .

[35]  H. T. Gooding.  Cable-fault location on power systems , 1966 .