Multi-objective optimization of biomass-based solid oxide fuel cell integrated with Stirling engine and electrolyzer

Abstract The aim of this study is to increase the power generation/exergy efficiency and reduce total product cost/environmental contamination of solid oxide fuel cells. Accordingly, three integrated systems are proposed and analyzed from energy, exergy, exergoeconomic, and environmental viewpoints through the parametric study. The first model assesses the combination of a gasifier with a solid oxide fuel cell. In the second model, waste heat of the first model is reused in the Stirling engine to enhance the efficiency and power generation. The last model proposes reuse of the surplus power of the Stirling engine in a proton exchange membrane electrolyzer for hydrogen production. Considering total product cost, exergy efficiency, and hydrogen production rate as the objective functions, a multi-objective optimization is applied based on the genetic algorithm. The results indicate that at the optimum operating condition, the exergy efficiency of the model (a), (b), and (c) is 28.51%, 39.51%, and 38.03%, respectively. Corresponding values for the energy efficiency and the emission rate of the models are 31.13%, 67.38%, 66.41%, 1.147 t/MWh, 0.7113 t/MWh, 0.7694 t/MWh. At the optimum solution point, total product cost associated with the model (a), (b), and (c) is 19.33 $/GJ, 18.91 $/GJ, and 24.93 $/GJ, respectively. If the hydrogen production rate and total product cost considered as the objective functions, at optimum solution point, the rate of hydrogen production and overall product cost would be 56.5 kg/day and 41.76 $/GJ, respectively. Overall, the proposed integrated systems demonstrate decent functionality both in thermodynamic, environmental, and economic aspects.

[1]  Fabio Rinaldi,et al.  Exergetic, economic, and environmental evaluations and multi-objective optimization of an internal-reforming SOFC-gas turbine cycle coupled with a Rankine cycle , 2016 .

[2]  Mehdi Ashjaee,et al.  Enhanced power generation through integrated renewable energy plants: Solar chimney and waste-to-energy , 2018, Energy Conversion and Management.

[3]  Nigel M. Sammes,et al.  Phosphoric acid fuel cells: Fundamentals and applications , 2004 .

[4]  Ibrahim Dincer,et al.  Optimization of Energy Systems , 2017 .

[5]  Kimmo Huoman,et al.  Control and energy efficiency of PEM water electrolyzers in renewable energy systems , 2017 .

[6]  Masoud Rokni,et al.  Thermodynamic and thermoeconomic analysis of a system with biomass gasification, solid oxide fuel cell (SOFC) and Stirling engine , 2014 .

[7]  E. Baniasadi,et al.  Performance assessment of a solar hydrogen and electricity production plant using high temperature PEM electrolyzer and energy storage , 2017 .

[8]  Arif Hepbasli,et al.  Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas–diesel engine: Part I – Methodology , 2010 .

[9]  Marc A. Rosen,et al.  Exergy assessment and optimization of a cogeneration system based on a solid oxide fuel cell integrated with a Stirling engine , 2017 .

[10]  M. J. Moran,et al.  Thermal design and optimization , 1995 .

[11]  Zahra Hajabdollahi,et al.  Multi-objective based configuration optimization of SOFC-GT cogeneration plant , 2017 .

[12]  Tatiana Morosuk,et al.  Comparative exergoeconomic evaluation of the latest generation of combined-cycle power plants , 2017 .

[13]  M. A. Ehyaei,et al.  Exergy, economic and environmental analysis and multi-objective optimization of a SOFC-GT power plant , 2017 .

[14]  Antje Wörner,et al.  A new process concept for highly efficient conversion of sewage sludge by combined fermentation and gasification and power generation in a hybrid system consisting of a SOFC and a gas turbine. , 2015 .

[15]  K. Yasuda,et al.  Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells , 2002 .

[16]  Hasan Hüseyin Erdem,et al.  Exergetic performance coefficient analysis of a simple fuel cell system , 2007 .

[17]  Jiangfeng Wang,et al.  Thermodynamic analysis of an SOFC–GT–ORC integrated power system with liquefied natural gas as heat sink , 2013 .

[18]  Ricardo Chacartegui,et al.  Stirling based fuel cell hybrid systems: An alternative for molten carbonate fuel cells , 2009 .

[19]  Marc A. Rosen,et al.  Energy and exergy assessments of a novel trigeneration system based on a solid oxide fuel cell , 2014 .

[20]  V. Zare,et al.  Proposal, exergy analysis and optimization of a new biomass-based cogeneration system , 2016 .

[21]  V. Zare,et al.  Integration of biomass gasification with a solid oxide fuel cell in a combined cooling, heating and power system: A thermodynamic and environmental analysis , 2016 .

[22]  D. Ferrero,et al.  Investigation of a novel concept for hydrogen production by PEM water electrolysis integrated with multi-junction solar cells , 2017 .

[23]  Animesh Dutta,et al.  Thermodynamic Equilibrium Model and Second Law Analysis of a Downdraft Waste Gasifier , 2007 .

[24]  Hongbin Zhao,et al.  Performance analysis of the SOFC–CCHP system based on H2O/Li–Br absorption refrigeration cycle fueled by coke oven gas , 2015 .

[25]  F. Boyaghchi,et al.  Multi-generation system incorporated with PEM electrolyzer and dual ORC based on biomass gasification waste heat recovery: Exergetic, economic and environmental impact optimizations , 2018 .

[26]  Petronilla Fragiacomo,et al.  Energy analysis of an SOFC system fed by syngas , 2015 .

[27]  M. Santarelli,et al.  Multi-objective optimization of a novel syngas fed SOFC power plant using a downdraft gasifier , 2018 .

[28]  A. H. Mosaffa,et al.  Thermoeconomic assessment of a novel integrated biomass based power generation system including gas turbine cycle, solid oxide fuel cell and Rankine cycle , 2018 .

[29]  M. Ni,et al.  Performance improvement of a direct carbon solid oxide fuel cell system by combining with a Stirling cycle , 2017 .

[30]  Masoud Rokni,et al.  Thermodynamic analyses of municipal solid waste gasification plant integrated with solid oxide fuel cell and Stirling hybrid system , 2015 .

[31]  M. J. Moran,et al.  Fundamentals of Engineering Thermodynamics , 2014 .

[32]  Ehsan Akrami,et al.  Analysis of a gas turbine based hybrid system by utilizing energy, exergy and exergoeconomic methodologies for steam, power and hydrogen production , 2017 .

[33]  Rouhollah Ahmadi,et al.  Energetical, exergetical and economical optimization analysis of combined power generation system of gas turbine and Stirling engine , 2018 .

[34]  D. Leung,et al.  Energy and exergy analysis of hydrogen production by a proton exchange membrane (PEM) electrolyzer plant , 2008 .

[35]  F. Mohammadkhani,et al.  Utilization of waste heat from GTMHR for hydrogen generation via combination of organic Rankine cycles and PEM electrolysis , 2016 .

[36]  Ermete Antolini,et al.  The stability of molten carbonate fuel cell electrodes: A review of recent improvements , 2011 .

[37]  Sarath Babu Anne,et al.  Analysis of integrated gasification combined cycle power plant incorporating chemical looping combustion for environment-friendly utilization of Indian coal , 2017 .

[38]  K. N. Seetharamu,et al.  Prediction of performance of a downdraft gasifier using equilibrium modeling for different biomass materials , 2001 .

[39]  Jun Li,et al.  Energy, exergy and exergoeconomic analyses of a combined supercritical CO2 recompression Brayton/absorption refrigeration cycle , 2017 .

[40]  François Maréchal,et al.  Robust multi-objective optimization of gasifier and solid oxide fuel cell plant for electricity production using wood , 2017 .

[41]  V. Zare,et al.  A comparative thermodynamic investigation with environmental analysis of SOFC waste heat to power conversion employing Kalina and Organic Rankine Cycles , 2016 .

[42]  Ibrahim Dincer,et al.  Energy and exergy analyses of electrolytic hydrogen production with molybdenum-oxo catalysts , 2012 .

[43]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[44]  Liming Wei,et al.  Effects of gas recycle on performance of solid oxide fuel cell power systems , 2011 .

[45]  Rachid Outbib,et al.  PEM fuel cells with bio-ethanol processor systems : a multidisciplinary study of modelling, simulation, fault diagnosis and advanced control , 2012 .

[46]  M. Rahimi,et al.  A comparison between two methods of generating power, heat and refrigeration via biomass based Solid Oxide Fuel Cell: A thermodynamic and environmental analysis , 2016 .

[47]  Athanasios J. Kolios,et al.  Thermodynamic analysis of a gamma type Stirling engine in an energy recovery system , 2018, Energy conversion and management.

[48]  Masoud Rokni,et al.  Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels , 2013 .

[49]  Atsushi Tsutsumi,et al.  Energy recuperation in solid oxide fuel cell (SOFC) and gas turbine (GT) combined system , 2003 .

[50]  Xiaoming Dong,et al.  Investigation on performance of an integrated SOFC-GE-KC power generation system using gaseous fuel from biomass gasification , 2017 .