Impact of Combined Alignments and Different Weather Conditions on Vehicle Rollovers
暂无分享,去创建一个
[1] K. Ksaibati,et al. Impact of crosswinds and truck weight on rollover propensity when negotiating combined curves , 2022, International Journal of Transportation Science and Technology.
[2] K. Ksaibati,et al. Impact of mountainous interstate alignments and truck configurations on rollover propensity. , 2021, Journal of safety research.
[3] K. Ksaibati,et al. Evaluating the effectiveness of law enforcement in reducing truck crashes for a rural mountainous freeway in Wyoming , 2021, Transportation Letters.
[4] Ahmed Farid,et al. A correlated random parameters approach to investigate large truck rollover crashes on mountainous interstates. , 2021, Accident; analysis and prevention.
[5] T. Echaveguren,et al. Reliability-based Estimation of Heavy Vehicle Rollover Probability on Two-Lane Highways , 2019, KSCE Journal of Civil Engineering.
[6] X. Wang,et al. Combined alignment effects on deceleration and acceleration: A driving simulator study , 2019, Transportation Research Part C: Emerging Technologies.
[7] A. Abdi,et al. Dynamic Modelling of the Effects of Combined Horizontal and Vertical Curves on Side Friction Factor and Lateral Acceleration , 2019, IOP Conference Series: Materials Science and Engineering.
[8] Yasser Hassan,et al. Probabilistic, safety-explicit design of horizontal curves on two-lane rural highways based on reliability analysis of naturalistic driving data. , 2019, Accident; analysis and prevention.
[9] Xiaoduan Sun,et al. Modeling of Lateral Stability of Tractor-Semitrailer on Combined Alignments of Freeway , 2018 .
[10] Mark J. King,et al. A comparison of road traffic crashes along mountainous and non-mountainous roads in Sabah, Malaysia , 2015 .
[11] Xuesong Wang,et al. The influence of combined alignments on lateral acceleration on mountainous freeways: a driving simulator study. , 2015, Accident; analysis and prevention.
[12] Suren Chen,et al. Modeling Crash Rates for a Mountainous Highway by Using Refined-Scale Panel Data , 2015 .
[13] Eric T. Donnell,et al. Superelevation Criteria for Sharp Horizontal Curves on Steep Grades , 2014 .
[14] Alfonso Montella,et al. Prediction of Drivers’ Speed Behavior on Rural Motorways Based on an Instrumented Vehicle Study , 2014 .
[15] Mohamed Abdel-Aty,et al. Multi-level Bayesian analyses for single- and multi-vehicle freeway crashes. , 2013, Accident; analysis and prevention.
[16] Karin M Bauer,et al. Safety Effects of Horizontal Curve and Grade Combinations on Rural Two-Lane Highways , 2013 .
[17] Lu Sun,et al. Reliability-Based Risk Analysis of Roadway Horizontal Curves , 2012 .
[18] Michael S. Berger,et al. Integration of look-ahead multicast and unicast scheduling for input-queued cell switches , 2012, 2012 IEEE 13th International Conference on High Performance Switching and Routing.
[19] Tejas Varunjikar,et al. Design of Horizontal Curves with Downgrades using Low-Order Vehicle Dynamics Models , 2011 .
[20] Ali Aram,et al. Effective Safety Factors on Horizontal Curves of Two-lane Highways , 2010 .
[21] Ali Charara,et al. Tire/road friction coefficient estimation applied to road safety , 2010, 18th Mediterranean Conference on Control and Automation, MED'10.
[22] Karl Iagnemma,et al. Stability measurement of high-speed vehicles , 2009 .
[23] A James McKnight,et al. Analysis of large truck rollover crashes. , 2008, Annals of advances in automotive medicine. Association for the Advancement of Automotive Medicine. Annual Scientific Conference.
[24] Said M. Easa,et al. Establishing design guidelines for compound horizontal curves on three-dimensional alignments , 2005 .
[25] Balbir S. Dhillon,et al. Safety Analysis Methods , 2004 .
[26] Balbir S. Dhillon,et al. Reliability, Quality, and Safety for Engineers , 2004 .
[27] Said M. Easa,et al. Radius Requirements for Reverse Horizontal Curves on Three-Dimensional Alignments , 2004 .
[28] C. Bhat. Quasi-random maximum simulated likelihood estimation of the mixed multinomial logit model , 2001 .
[29] F Mannering,et al. Effect of roadway geometrics and environmental factors on rural freeway accident frequencies. , 1995, Accident; analysis and prevention.
[30] R D Ervin,et al. The Influence of Size and Weight Variables on the Roll Stability of Heavy Duty Trucks , 1983 .
[31] A. Boyd. The United States department of transportation , 1968 .
[32] Xuesong Wang,et al. Impact of combined alignments on lane departure: A simulator study for mountainous freeways , 2018 .
[33] Ali Abdi Kordani,et al. The effect of combined horizontal curve and longitudinal grade on side friction factors , 2015 .
[34] Ali Abdi Kordani,et al. Multi-Body Simulation Modeling of Vehicle Skidding and Roll over for Horizontal Curves on Longitudinal Grades , 2014 .
[35] Francesco Bella,et al. Effects of Combined Curves on Driver's Speed Behavior: Driving Simulator Study☆ , 2014 .
[36] Shao Yi-ming,et al. Method for Horizontal Geometry Design of Mountainous Roads Based on Trajectory-speed Cooperative Control , 2013 .
[37] Karin M Bauer,et al. Safety Effects of Horizontal Curve and Grade , 2013 .
[38] Dalal Hanno,et al. Effect of the combination of horizontal and vertical alignments on road safety , 2004 .
[39] Lily Elefteriadou,et al. REVIEW OF TRUCK CHARACTERISTICS AS FACTORS IN ROADWAY DESIGN , 2003 .
[40] A. Khattak,et al. RISK FACTORS IN LARGE TRUCK ROLLOVERS AND INJURY SEVERITY: ANALYSIS OF SINGLE-VEHICLE COLLISIONS , 2003 .
[41] Ruediger Lamm,et al. Highway Design and Traffic Safety Engineering Handbook , 1999 .
[42] Basil Psarianos,et al. INFLUENCE OF VEHICLE PARAMETERS ON HORIZONTAL CURVE DESIGN OF RURAL HIGHWAYS , 1998 .
[43] C J Messer,et al. HORIZONTAL ALIGNMENT DESIGN CONSISTENCY FOR RURAL TWO-LANE HIGHWAYS. FINAL REPORT , 1995 .
[44] Paul H. Wright,et al. RELATIONSHIPS BETWEEN VERTICAL AND HORIZONTAL ROADWAY ALIGNMENTS AND THE INCIDENCE OF FATAL ROLLOVER CRASHES IN NEW MEXICO AND GEORGIA , 1987 .
[45] C. C. MacAdam,et al. Side Friction for Superelevation on Horizontal Curves Vol I : [executive summary]. , 1985 .