Recent results in Jülich solid oxide fuel cell technology development
暂无分享,去创建一个
Robert Steinberger-Wilckens | Norbert H. Menzler | Jürgen Malzbender | Ludger Blum | L.G.J. de Haart | Josef Remmel | N. Menzler | J. Malzbender | R. Steinberger‐Wilckens | L. D. Haart | L. Blum | J. Remmel
[1] Rolf W. Steinbrech,et al. Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells , 2007 .
[2] Rolf W. Steinbrech,et al. Studies of Material Interaction After Long‐Term Stack Operation , 2007 .
[3] S. Uhlenbruck,et al. Thin film coating technologies of (Ce,Gd)O2-δ interlayers for application in ceramic high-temperature fuel cells , 2007 .
[4] Hans Peter Buchkremer,et al. Novel high-performance solid oxide fuel cells with bulk ionic conductance dominated thin-film electrolytes , 2012 .
[5] Norbert H. Menzler,et al. Influence of anode thickness on the power output of solid oxide fuel cells with (La,Sr)(Co,Fe)-type cathode , 2010 .
[6] Norbert H. Menzler,et al. Stack Degradation in Dependence of Operation Parameters; the Real‐SOFC Sensitivity Analysis , 2009 .
[7] Murat Peksen,et al. A coupled 3D thermofluid–thermomechanical analysis of a planar type production scale SOFC stack , 2011 .
[8] Norbert H. Menzler,et al. Degradation of Solid Oxide Fuel Cell Performance by Cr-Poisoning , 2011 .
[9] Doris Sebold,et al. Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs , 2005 .
[10] H. Nabielek,et al. Overview of the Development of Solid Oxide Fuel Cells at Forschungszentrum Juelich , 2006 .
[11] Andreas Mai,et al. Advances in Research, Development, and Testing of Single Cells at Forschungszentrum Jülich , 2009 .
[12] Norbert H. Menzler,et al. Post-Test Characterization of an SOFC Short-Stack after 17,000 Hours of Steady Operation , 2011 .
[13] Andreas Mai,et al. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: Part II. Influence of the CGO interlayer , 2006 .
[14] Andreas Mai,et al. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells. Part I. Variation of composition , 2005 .
[15] Jürgen Malzbender,et al. Component interactions after long-term operation of an SOFC stack with LSM cathode , 2012 .
[16] Murat Peksen,et al. Hierarchical 3D multiphysics modelling in the design and optimisation of SOFC system components , 2011 .
[17] Lorenz Singheiser,et al. Effect of Geometry and Composition of Cr Steels on Oxide Scale Properties Relevant for Interconnector Applications in Solid Oxide Fuel Cells (SOFCs) , 2006 .
[18] Ludger Blum,et al. Overview of the Development of Solid Oxide Fuel Cells at Forschungszentrum Juelich , 2006 .
[19] Murat Peksen,et al. Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschung , 2011 .
[20] L.G.J. de Haart,et al. Development of a Solid Oxide Fuel Cell for the utilization of coal mine gas , 2011 .
[21] Norbert H. Menzler,et al. Degradation of anode supported cell (ASC) performance by Cr-poisoning , 2011 .
[22] Murat Peksen,et al. 3D coupled CFD/FEM modelling and experimental validation of a planar type air pre-heater used in SOF , 2011 .
[23] Robert Steinberger-Wilckens,et al. Progress in SOFC Stack Development at Forschungszentrum Jülich , 2004 .