Fabrication and Normal/Shear Stress Responses of Tactile Sensors of Polymer/Si Cantilevers Embedded in PDMS and Urethane Gel Elastomers

Cantilever-type tactile sensors of silicon-polymer beam structures were fabricated by surface micromachining and covering with elastomers. Two kinds of elastomers with different Young's modulus PDMS and urethane gel have been used to control deflection of the cantilevers and adjust the sensitivity cantilever-type tactile sensors. The resistance change of the sensor with PDMS has linear dependence on normal and shear stresses, but that of the sensor with urethane gel is nonliner to normal and shear stresses. However, the sensitivity of urethane gel type sensor is about 30 times larger than PDMS type sensor.

[1]  Illah R. Nourbakhsh,et al.  The role of expressiveness and attention in human-robot interaction , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[2]  Kazuhito Yokoi,et al.  The first humanoid robot that has the same size as a human and that can lie down and get up , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[3]  K. Matsumoto,et al.  300nm-thick cantilever in PDMS for tactile sensing , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[4]  Hiroyuki Shinoda,et al.  Robot skin based on touch-area-sensitive tactile element , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[5]  I. Shimoyama,et al.  A shear stress sensor for tactile sensing with the piezoresistive cantilever standing in elastic material , 2006 .

[6]  Minoru Noda,et al.  Studies on Curvature Deformation Control of Bilayer Cantilever Fabricated by Surface Micromachining of SOI Wafer , 2006 .

[7]  F. Guenter,et al.  Design of a Biomimetic Spine for the Humanoid Robot Robota , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[8]  M. Shikida,et al.  Glove Type of Wearable Tactile Sensor Produced by Artificial Hollow Fiber , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[9]  Chih-Chieh Wen,et al.  3-Axes Tactile Sensor with Tunable Sensing Range , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[10]  Terukazu Mizota,et al.  Development of an Integrated Multi-Axis Tactile Sensor: Distributed Preprocessing for Tactile Recognitions , 2007, 2007 IEEE Virtual Reality Conference.

[11]  F. Arai,et al.  Piezoelectric Vibration-Type Tactile Sensor Using Elasticity and Viscosity Change of Structure , 2006, IEEE Sensors Journal.

[12]  M. Sohgawa,et al.  Fabrication and Characterization of Silicon-Polymer Beam Structures for Cantilever-Type Tactile Sensors , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.