The effect of mixing conditions on the material properties of an agar gel—microstructural and macrostructural considerations

Abstract The effect of mixing on the properties of agar gels was investigated with consideration being given to both macrostructural and microstructural characteristics of the gel through rheological techniques that include conventional and ultrasound based methods and Differential Scanning Calorimetry. Agar gels of 1 and 3% concentrations were prepared. The gels were subjected to three different mixing conditions: no mix, slow mix (400 rpm), and fast mix (900 rpm). A pulse echo ultrasound technique was utilized to obtain velocity measurements and these velocity measurements were used to obtain ultrasound derived mechanical modulus values. A controlled-stress rheometer was used to obtain rheological properties of the gel as well. Differential Scanning Calorimetry (DSC) was performed to determine thermal transitions of the various systems studied in order to obtain information on the degree of microstructural association of the agarose fractions. Mixing speed affected the degree of porosity induced in the system, by incorporation of the air bubbles, and the rheology of the system. Both ultrasound derived mechanical properties and those obtained in a conventional rheometer showed that mixed gels were stronger than the no mix gels in spite of the no mix gels exhibited negligible porosity, i.e. they did not have bubbles that could weak the macrostructure of the gels. In addition, DSC results indicated that gels mixed at different conditions exhibited thermal transitions at different temperatures. These results showed that material properties of agar gels might be more sensitive to changes in the microstructure than the macrostructure of these systems. This highlights the importance on preparation conditions and utility of an agar gel.

[1]  D. Mcclements.  Ultrasonic characterisation of emulsions and suspensions , 1991 .

[2]  J. Ferry,et al.  Studies of the Cross-linking Process in Gelatin Gels. III. Dependence of Melting Point on Concentration and Molecular Weight , 1954 .

[3]  H. Henning Winter,et al.  Analysis of Linear Viscoelasticity of a Crosslinking Polymer at the Gel Point , 1986 .

[4]  N. Kusukawa,et al.  Effect of gelation conditions on the gel structure and resolving power of agarose‐based DNA sequencing gels , 1999, Electrophoresis.

[5]  S. Arnott,et al.  The agarose double helix and its function in agarose gel structure. , 1974, Journal of molecular biology.

[6]  Martin G. Scanlon,et al.  Bread properties and crumb structure , 2001 .

[7]  S. Danforth,et al.  Dynamic rheology of agar gels: theory and experiments. Part I. Development of a rheological model , 2002 .

[8]  K. Inoue,et al.  Effect of mixing method on rheological properties of alginate impression materials. , 2002, Journal of oral rehabilitation.

[9]  A. Clark,et al.  The concentration dependence of biopolymer gel modulus , 1985 .

[10]  H. Winter,et al.  Linear Viscoelasticity at the Gel Point of a Crosslinking PDMS with Imbalanced Stoichiometry , 1987 .

[11]  M. Djabourov,et al.  Small-angle X-ray scattering characterization of agarose sols and gels , 1989 .

[12]  E. O. Arikainen,et al.  Monitoring of acidified milk gel formation by ultrasonic shear wave measurements. High-frequency viscoelastic moduli of milk and acidified milk gel. , 2001, Journal of dairy science.

[13]  K. Nishinari,et al.  RHEOLOGICAL PROPERTIES OF AQUEOUS AGAROSE‐GELATIN GELS , 1980 .

[14]  W. Hanselmann,et al.  Flow characteristics and modelling of foam generation in a continuous rotor/stator mixer , 1998 .

[15]  John R. Mitchell,et al.  RHEOLOGY OF GELS , 1976 .

[16]  N. Sanjuán,et al.  Prediction of instrumental and sensory textural characteristics of Mahon cheese from ultrasonic measurements. , 2000 .

[17]  V. Morris,et al.  Rheological studies of specific cation forms of kappa carrageenan gels , 1983 .

[18]  M. Peleg,et al.  CHARACTERIZATION OF GELLAN GELS BY UNIAXIAL COMPRESSION, STRESS RELAXATION AND CREEP , 1990 .

[19]  M. Burns,et al.  Mobility, diffusion and dispersion of single‐stranded DNA in sequencing gels , 2001, Electrophoresis.

[20]  P. Lillford,et al.  Structure, mechanics and texture of a food sponge , 1989 .

[21]  David Julian McClements,et al.  Ultrasonics in food engineering. Part I: Introduction and experimental methods , 1988 .

[22]  D. Oakenfull.  A Method for using Measurements of Shear Modulus to Estimate the Size and Thermodynamic Stability of Junction Zones in Noncovalently Cross‐Linked Gels , 1984 .

[23]  C. Sayers.  Ultrasound in Solids with Porosity, Microcracking and Polycrystalline Structuring , 1993 .

[24]  P. Fryer,et al.  Aeration of bread dough during mixing: Effect of mixing dough at reduced pressure , 1998 .

[25]  K. Nishinari,et al.  Differential scanning calorimetry, rheology, x-ray, and NMR of very concentrated agarose gels , 1989 .

[26]  Jan Drewes Achenbach,et al.  The Evaluation of materials and structures by quantitative ultrasonics , 1993 .