Disc brake squeal characterization through simplified test rigs

This paper presents a review of recent investigations on brake squeal noise carried out on simplified experimental rigs. The common theme of these works is that of approaching the study of squeal noise on experimental set-ups that are much simpler than commercial disc brakes, providing the possibility of repeatable measurements of squeal occurrence. As a consequence, it is possible to build consistent and robust models of the experimental apparatus to simulate the squeal events and to understand the physics behind squeal instabilities.

[1]  L. Gaul,et al.  A study on brake squeal using a beam-on-disc model , 2002 .

[2]  Jim Woodhouse,et al.  Instability of systems with a frictional point contact. Part 1: basic modelling , 2004 .

[3]  Aldo Sestieri,et al.  Brake squeal: Linear and nonlinear numerical approaches , 2007 .

[4]  Laurent Baillet,et al.  Experimental analysis on squeal modal instability , 2006 .

[5]  James H. Tarter,et al.  Disc Brake Squeal , 1983 .

[6]  Louis Jezequel,et al.  Mode coupling instability in friction-induced vibrations and its dependency on system parameters including damping , 2007 .

[7]  S. Earles,et al.  A MECHANISM OF DISC-BRAKE SQUEAL , 1977 .

[8]  Staffan Jacobson,et al.  Surface characterisation of brake pads after running under silent and squealing conditions , 1999 .

[9]  John E. Mottershead,et al.  Parametric Resonances at Subcritical Speeds in Discs with Rotating Frictional Loads , 1994 .

[10]  Staffan Jacobson,et al.  Influence of disc topography on generation of brake squeal , 1999 .

[11]  D. J. Ewins,et al.  Effect of pin finite width on instability of pin-on-disc systems , 2002 .

[12]  Oliviero Giannini,et al.  Experimental analysis of brake squeal noise on a laboratory brake setup , 2006 .

[13]  J. Woodhouseb,et al.  Instability of systems with a frictional point contact — Part 3 : Experimental tests , 2007 .

[14]  Aldo Sestieri,et al.  Predictive model of squeal noise occurring on a laboratory brake , 2006 .

[15]  Staffan Jacobson,et al.  On the nature of tribological contact in automotive brakes , 2002 .

[16]  Chen Guangxiong,et al.  Effect of surface topography on formation of squeal under reciprocating sliding , 2002 .

[17]  A. Akay.  Acoustics of friction. , 2002, The Journal of the Acoustical Society of America.

[18]  Laurent Baillet,et al.  Brake squeal as dynamic instability: An experimental investigation , 2006 .

[19]  L. Gaul,et al.  Effects of damping on mode‐coupling instability in friction induced oscillations , 2003 .

[20]  Oliviero Giannini,et al.  An experimental study on the brake squeal noise , 2004 .

[21]  Oliver M. O’Reilly,et al.  Automotive disc brake squeal , 2003 .

[22]  R. T. Spurr.  A Theory of Brake Squeal , 1961 .

[23]  Oliviero Giannini,et al.  Characterization of the high-frequency squeal on a laboratory brake setup , 2008 .

[24]  John E. Mottershead,et al.  Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship , 1998 .

[25]  Y. Wang,et al.  FRICTION-INDUCED NOISE AND VIBRATION OF DISC BRAKES , 1989 .

[26]  Laurent Baillet,et al.  Contact surface topography and system dynamics of brake squeal , 2008 .

[27]  Chen Guangxiong,et al.  Experimental investigation into squeal under reciprocating sliding , 2003 .

[28]  Oliviero Giannini,et al.  Effect of damping on the propensity of squeal instability: an experimental investigation. , 2008, The Journal of the Acoustical Society of America.

[29]  Abd Rahim AbuBakar,et al.  Complex eigenvalue analysis and dynamic transient analysis in predicting disc brake squeal , 2006 .

[30]  John E. Mottershead,et al.  Vibration- and friction-induced instability in disks , 1998 .

[31]  John D. Fieldhouse,et al.  The Application of Holographic Interferometry to the Study of Disc Brake Noise , 1993 .

[32]  John D. Fieldhouse,et al.  Double pulsed holography used to investigate noisy brakes , 1996 .

[33]  Oliviero Giannini,et al.  A laboratory brake for the study of automotive brake noise , 2002 .

[34]  D. J. Ewins,et al.  Mode lock-in characteristics and instability study of the pin-on-disc system , 2001 .

[35]  Oliviero Giannini,et al.  Extension of a modal instability theory to real brake systems , 2005 .

[36]  Louis Jezequel,et al.  Effects of damping on brake squeal coalescence patterns – application on a finite element model , 2007 .

[37]  Chin An Tan,et al.  Disc Brake Squeal: Mechanism, Analysis, Evaluation, and Reduction/Prevention , 2006 .

[38]  S. K. Rhee,et al.  The role of friction film in friction, wear, and noise of automotive brakes , 1990 .