Comparison of silica-based materials and fibers in side- and end-pumped fiber lasers

We have developed a production process for rare earth doped bulk silica to fulfill the demand of such material for fiber laser applications. In contrast to the standard techniques such as a combination of MCVD (modified chemical vapor deposition) and solution doping, our novel technology is based on a granulate process that enables novel ultra large mode area fiber designs (XLMA) with active core diameters above 100 μm as well as larger batch sizes. Several Yb-doped fibers with two different fiber designs were manufactured and successfully tested in both side- and end-pumped fiber laser setups. Both fiber designs have been compared to similar MCVD fibers. The influence of the material composition on the photodarkening properties has been investigated.

[1]  D. Payne,et al.  Photodarkening in Yb-doped aluminosilicate fibers induced by 488 nm irradiation , 2007 .

[2]  S. Unger,et al.  Efficient Yb laser fibers with low photodarkening by optimization of the core composition. , 2008, Optics express.

[3]  Benoit Cadier,et al.  Photo darkening in ytterbium co-doped silica material , 2008, SPIE LASE.

[4]  S. Unger,et al.  Photodarkening in Yb doped fibers: experimental evidence of equilibrium states depending on the pump power. , 2007, Optics express.

[5]  M. Nakai,et al.  Population inversion factor dependence of photodarkening of Yb-doped fibers and its suppression by highly aluminum doping , 2006, 2006 Optical Fiber Communication Conference and the National Fiber Optic Engineers Conference.

[6]  A. V. Shubin,et al.  Photodarkening of alumosilicate and phosphosilicate Yb-doped fibers , 2007, 2007 European Conference on Lasers and Electro-Optics and the International Quantum Electronics Conference.

[7]  M. Söderlund,et al.  Measuring photodarkening from single-mode ytterbium doped silica fibers. , 2006, Optics express.

[8]  Bertrand Morasse,et al.  Low photodarkening single cladding ytterbium fibre amplifier , 2007, SPIE LASE.

[9]  Volker Krause,et al.  A new material for high-power laser fibers , 2008, SPIE LASE.

[10]  L. Norin,et al.  Preventing photodarkening in ytterbium-doped high power fiber lasers; correlation to the UV-transparency of the core glass. , 2008, Optics express.

[11]  C. Burrus,et al.  Neodymium‐doped silica lasers in end‐pumped fiber geometry , 1973 .

[12]  David N. Payne,et al.  Solution-doping technique for fabrication of rare-earth-doped optical fibres , 1987 .

[13]  Johannes Kirchhof,et al.  Optical properties of Yb-doped laser fibers in dependence on codopants and preparation conditions , 2008, SPIE OPTO.