A review of the development of airflow models used in building load calculation and energy simulation
暂无分享,去创建一个
[1] Hachimi Fellouah,et al. Numerical analysis and field measurements of the airflow patterns and thermal comfort in an indoor swimming pool: a case study , 2017 .
[2] S Schiavon,et al. Thermal comfort, perceived air quality, and cognitive performance when personally controlled air movement is used by tropically acclimatized persons , 2017, Indoor air.
[3] Yao Yu,et al. Study of residential underfloor air distribution (UFAD) systems using a new modelling approach , 2017 .
[4] Zhiqiang Zhai,et al. Advances in building simulation and computational techniques: A review between 1987 and 2014 , 2016 .
[5] Yao Yu,et al. A Novel Method for Thermostat Set Point Prediction for Energy Savings and/or Better Human Thermal Comfort - A Zonal Modelling Approach , 2014 .
[6] Michael A. Gerber,et al. EnergyPlus Energy Simulation Software , 2014 .
[7] Sigrid Reiter,et al. Coupling building energy simulation and computational fluid dynamics: application to a two-storey house in a temperate climate , 2014 .
[8] Yao Yu,et al. A NOVEL PRESSURIZED ZONAL MODEL USING THE MOMENTUM EQUATION , 2014 .
[9] Yao Yu,et al. DYNAMIC ENERGY MODELING OF AN EXPERIMENTAL BUILDING EQUIPPED WITH AN UNDERFLOOR AIR DISTRIBUTION (UFAD) SYSTEM , 2014 .
[10] Victor Norrefeldt,et al. Enhancement of the building simulation software TRNSYS by coupling to the VEPZO model programmed in Modelica , 2014 .
[11] Victor Norrefeldt,et al. VEPZO – Velocity propagating zonal model for the estimation of the airflow pattern and temperature distribution in a confined space , 2012 .
[12] Shinsuke Kato,et al. Integration of three-dimensional CFD results into energy simulations utilizing an Advection–Diffusion Response Factor , 2011 .
[13] Ahmad M. Mahmoud,et al. Coupled heat transfer modes for calculation of cooling load through hollow concrete building walls , 2011 .
[14] Gang Wu,et al. Study on simulation methods of atrium building cooling load in hot and humid regions , 2010 .
[15] Sue Ellen Haupt,et al. Computational Fluid Dynamics Coupled with Thermal Impact Model for Building Design , 2010, J. Comput..
[16] Ahmed Daoud,et al. Calculation of refrigeration loads by convection, radiation and condensation in ice rinks using a transient 3D zonal model , 2008 .
[17] R. Martinuzzi,et al. Numerical Modeling of Energy Consumption in a Typical Residential Building , 2008 .
[18] F. Haghighat,et al. Zonal Modeling for Simulating Indoor Environment of Buildings: Review, Recent Developments, and Applications , 2007 .
[19] Ahmed Cherif Megri,et al. Building Load and Energy Simulation Programs and the Design Process , 2007 .
[20] Weeratunge Malalasekera,et al. An introduction to computational fluid dynamics - the finite volume method , 2007 .
[21] Zhiqiang John Zhai,et al. Sensitivity analysis and application guides for integrated building energy and CFD simulation , 2006 .
[22] Shinsuke Kato,et al. Building Design utilizing Natural Ventilation based on CFD and Ventilation Network Analysis and its Performance Evaluation by Field Measurement , 2005 .
[23] Zhiqiang John Zhai,et al. Performance of coupled building energy and CFD simulations , 2005 .
[24] Atila Novoselac,et al. Combined Airflow and Energy Simulation Program for Building Mechanical System Design , 2004 .
[25] E.J. Teshome,et al. Zonal Models for Indoor Air Flow - A Critical Review , 2004 .
[26] Zhiqiang Zhai,et al. Numerical determination and treatment of convective heat transfer coefficient in the coupled building energy and CFD simulation , 2004 .
[27] A. Bellivier. Modélisation numérique de la thermoaéraulique du bâtiment: des modèles CFD à une approche hybride volumes finis / zonale , 2004 .
[28] Brent Griffith,et al. Framework for Coupling Room Air Models to Heat Balance Model Load and Energy Calculations (RP-1222) , 2004 .
[29] Christian Inard,et al. SIMSPARK: AN OBJECT-ORIENTED ENVIRONMENT TO PREDICT COUPLED HEAT AND MASS TRANSFERS IN BUILDINGS , 2003 .
[30] Steven J. Emmerich,et al. Integration of Airflow and Energy Simulation Using CONTAM and TRNSYS | NIST , 2003 .
[31] Brent Griffith,et al. A Momentum-Zonal Model for Predicting Zone Airflow and Temperature Distributions to Enhance Building Load and Energy Simulations , 2003 .
[32] Zhiqiang Zhai,et al. Solution characters of iterative coupling between energy simulation and CFD programs , 2003 .
[33] L Mora,et al. Comparing zonal and CFD model predictions of isothermal indoor airflows to experimental data. , 2003, Indoor air.
[34] Qingyan Chen,et al. On approaches to couple energy simulation and computational fluid dynamics programs , 2002 .
[35] Marjorie Musy,et al. Automatically generated zonal models for building air flow simulation: principles and applications , 2002 .
[36] P. Riederer,et al. Room thermal modelling adapted to the test of HVAC control systems , 2002 .
[37] Fariborz Haghighat,et al. Development and validation of a zonal model — POMA , 2001 .
[38] James W. Axley,et al. Surface-drag flow relations for zonal modeling , 2001 .
[39] Philip Haves,et al. A nodal model for displacement ventilation and chilled ceiling systems in office spaces , 2001 .
[40] Qingyan Chen,et al. STRATEGIES FOR COUPLING ENERGY SIMULATION AND COMPUTATIONAL FLUID DYNAMICS PROGRAMS , 2001 .
[41] Marjorie Musy,et al. Generation of a zonal model to simulate natural convection in a room with a radiative/convective heater , 2001 .
[42] Francis Allard,et al. About the construction of autonomous zonal models , 2001 .
[43] Moncef Krarti,et al. Energy Audit of Building Systems : An Engineering Approach , 2000 .
[44] Jelena Srebric,et al. A Coupled Airflow and Energy Simulation Program for Indoor Thermal Environmental Studies , 2000 .
[45] Etienne Wurtz,et al. Two- and three-dimensional natural and mixed convection simulation using modular zonal models in buildings , 1999 .
[46] Qingyan Chen,et al. A zero-equation turbulence model for indoor airflow simulation , 1998 .
[47] Christian Inard,et al. Energy consumption and thermal comfort in dwelling-cells: A zonal-model approach , 1998 .
[48] Helmut E. Feustel,et al. COMIS—an international multizone air-flow and contaminant transport model , 1998 .
[49] Jeffrey D. Spitler,et al. The Radiant Time Series Cooling Load Calculation Procedure , 1997 .
[50] Christian Inard,et al. Use of a zonal model for the prediction of air temperature distribution in large enclosures , 1996 .
[51] Christian Inard,et al. Prediction of air temperature distribution in buildings with a zonal model , 1996 .
[52] Etienne Wurtz,et al. Two and Three Dimensional Natural and Mixed Convection Simulation using Modular Zonal Models , 1996 .
[53] Etienne Wurtz,et al. Modélisation tridimensionnelle des transferts thermiques et aérauliques dans le bâtiment en environnement orienté objet , 1995 .
[54] Mats Sandberg,et al. Vertical Temperature Profiles in Rooms Ventilated by Displacement: Full‐Scale Measurement and Nodal Modelling , 1992 .
[55] Qingyan Chen,et al. Indoor airflow, air quality and energy consumption of buildings , 1988 .
[56] A. T. Howarth,et al. The prediction of air temperature variations in naturally ventilated rooms with convective heating , 1985 .
[57] G. P Mitales,et al. Transfer function method of calculating cooling loads, heat extraction and space temperature , 1973 .
[58] Amtliches Mitteilungsblatt,et al. August , 1890, The Hospital.
[59] N. Szczepanik-Ścisło. Personal Ventilation Modeling Using a CFD Analysis , 2016 .
[60] Yao Yu,et al. Contribution to the development of a new integrated zonal modeling approach in building environment , 2014 .
[61] Jelle Laverge,et al. On the coupling of a zonal model with a multizone building energy simulation model , 2014 .
[62] J. S. Haberl,et al. Literature Review of the History of Building Peak Load and Annual Energy Use Calculation Methods in the U.S. , 2012 .
[63] Teshome Edae Jiru,et al. A new generation of zonal models : development, verification and application , 2006 .
[64] Ahmed Daoud,et al. Calculation of the thermal loads of an ice rink using a zonal model and building energy simulation software , 2006 .
[65] Mglc Marcel Loomans,et al. External coupling between CFD and energy simulation : implementation and validation , 2005 .
[66] Mglc Marcel Loomans,et al. Toward external coupling of building energy and airflow modelling programs , 2003 .
[67] Marjorie Musy,et al. AUTOMATIC GENERATION OF PARTITIONING AND MODELING ADAPTED TO ZONAL METHOD , 2003 .
[68] Zhiqiang Zhai,et al. Developing an integrated building design tool by coupling building energy simulation and computational fluid dynamics programs , 2003 .
[69] L. Mora,et al. Prédiction des performances thermo-aérauliques des bâtiments par association de modèles de différents niveaux de finesse au sein d'un environnement orienté objet , 2003 .
[70] Brent T. Griffith,et al. Incorporating nodal and zonal room air models into building energy calculation procedures , 2002 .
[71] F. Carrié,et al. Thermal and ventilation modelling of large highly-glazed spaces , 2001 .
[72] Joseph Andrew Clarke,et al. Further developments in the conflation of CFD and building simulation , 2001 .
[73] Ian Beausoleil-Morrison,et al. The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation , 2000 .
[74] Russell D. Taylor,et al. LINKING THE COMIS MULTI-ZONE AIRFLOW MODEL WITH THE ENERGYPLUS BUILDING ENERGY SIMULATION PROGRAM , 1999 .
[75] Yi Lin,et al. POMA : a zonal model for airflow and temperature distribution analysis , 1999 .
[76] P. Heiselberg,et al. Ventilation of Large Spaces in Buildings: Analysis and Prediction Techniques , 1998 .
[77] Simon J. Rees,et al. Modelling of displacement ventilation and chilled ceiling systems using nodal models , 1998 .
[78] Peter V. Nielsen,et al. Computational Fluid Dynamics and Building Energy Performance Simulation , 1998 .
[79] Yan Huo,et al. Ventilation impact on indoor air quality problems in partitioned offices , 1997 .
[80] Hassan Bouia,et al. Modélisation simplifiée d'écoulements de convection mixte interne : application aux échanges thermo-aérauliques dans les locaux , 1993 .
[81] Helmut E. Feustel,et al. A survey of airflow models for multizone structures , 1992 .
[82] H. Overby,et al. Calculation of Vertical Temperature Gradients in Heated Rooms , 1990 .
[83] A. Hwang. [Thermal comfort]. , 1990, Taehan kanho. The Korean nurse.
[84] Refrigerating. ASHRAE handbook of fundamentals , 1967 .