Experimental and numerical investigation of asperities and indents with respect to rolling contact fatigue

[1]  O. Reynolds.  IV. On the theory of lubrication and its application to Mr. Beauchamp tower’s experiments, including an experimental determination of the viscosity of olive oil , 1886, Philosophical Transactions of the Royal Society of London.

[2]  D. Dowson,et al.  Elasto-Hydrodynamic Lubrication: A Survey of Isothermal Solutions , 1962 .

[3]  W. 0. Winer,et al.  Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils(Dr In dissertation at Technical University of Delft, 1966) , 1966 .

[4]  J. Archard,et al.  Pitting of Gears and Discs , 1974 .

[5]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter Results , 1976 .

[6]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[7]  S. Bair,et al.  Shear strength measurements of lubricants at high pressure , 1979 .

[8]  M. Godet,et al.  Simulation of Hertzian Contacts Found in Spur Gears with a High Performance Disk Machine , 1981 .

[9]  H. Lorösch.  Influence of Load on the Magnitude of the Life Exponent for Rolling Bearings , 1982 .

[10]  R. Sayles,et al.  Influence of Wear Debris on Rolling Contact Fatigue , 1982 .

[11]  R. S. Sayles,et al.  Debris Damage in Rolling Bearings and Its Effects on Fatigue Life , 1988 .

[12]  T. E. Tallian,et al.  Failure atlas for Hertz contact machine elements , 1992 .

[13]  A. Lubrecht,et al.  Numerical Simulation of a Transverse Ridge in a Circular EHL Contact Under Rolling/Sliding , 1994 .

[14]  Herbert S. Cheng,et al.  Experimental Investigation on Rolling/Sliding Contact Fatigue Crack Initiation with Artificial Defects , 1994 .

[15]  M. Olsson,et al.  Standing contact fatigue , 1999 .

[16]  J. Beynon,et al.  Effects of surface defects on rolling contact fatigue of 60/40 brass , 1999 .

[17]  R. Larsson,et al.  Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses , 2000 .

[18]  F. Ville,et al.  Detrimental Effects of Debris Dents on Rolling Contact Fatigue , 2000 .

[19]  M. Olsson,et al.  Applying multiaxial fatigue criteria to standing contact fatigue , 2001 .

[20]  D. Nélias,et al.  New methodology to evaluate the rolling contact fatigue performance of bearing steels with surface dents : Application to 32CrMoV13 (nitrided) and M50 steels , 2003 .

[21]  Bo Alfredsson,et al.  Inclined standing contact fatigue , 2003 .

[22]  H. P. Evans,et al.  Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method Part 1: Theory and validation , 2003 .

[23]  B. Alfredsson,et al.  A study on fretting friction evolution and fretting fatigue crack initiation for a spherical contact , 2004 .

[24]  Bo Alfredsson,et al.  Standing contact fatigue with a cylindrical indenter , 2005 .

[25]  S. Coulon,et al.  Experimental investigations of Rolling Contact Fatigue of dented surfaces using artificial defects , 2005 .

[26]  A. Lubrecht,et al.  Influence of Solid Contaminants on the Fatigue Life of Lubricated Machine Elements , 2006 .

[27]  F. Weiler,et al.  Octree-based Generation of Hexahedral Element Meshes , 2007 .

[28]  D. Nélias,et al.  Contact Fatigue Analysis of a Dented Surface in a Dry Elastic–Plastic Circular Point Contact , 2008 .

[29]  S. Miyata,et al.  Experimental investigation of temperature rise in elliptical EHL contacts , 2008 .

[30]  John Song,et al.  GEOMETRIC MEASUREMENT COMPARISONS FOR ROCKWELL DIAMOND INDENTERS , 2009 .

[31]  Xiaoyu A. Zheng,et al.  GEOMETRIC MEASUREMENT COMPARISONS FOR ROCKWELL DIAMOND INDENTERS | NIST , 2009 .

[32]  F. Sadeghi,et al.  Effects of surface defects on rolling contact fatigue of heavily loaded lubricated contacts , 2010 .

[33]  B. Alfredsson,et al.  Rolling contact fatigue crack path prediction by the asperity point load mechanism , 2011 .

[34]  B. Alfredsson,et al.  Surface initiated rolling contact fatigue based on the asperity point load mechanism—A parameter study , 2012 .

[35]  B. Alfredsson,et al.  A fracture mechanical life prediction method for rolling contact fatigue based on the asperity point load mechanism , 2012 .

[36]  Ping Huang.  Numerical Calculation of Lubrication: Methods and Programs , 2013 .

[37]  G. Morales-Espejel.  Surface roughness effects in elastohydrodynamic lubrication: A review with contributions , 2014 .

[38]  B. Alfredsson,et al.  Numerical investigation of the spall opening angle of surface initiated rolling contact fatigue , 2014 .

[39]  G. Morales-Espejel,et al.  The Progression of Surface Rolling Contact Fatigue Damage of Rolling Bearings with Artificial Dents , 2015 .

[40]  Jens Johansson.  On the influence of gear oil properties on pitting life , 2015 .

[41]  Particle entrapment and indentation process in rolling bearings , 2016 .

[42]  H. P. Evans,et al.  Assessment of the effects of residual stresses on fatigue life of real rough surfaces in lubricated contact , 2016, 2016 International Conference for Students on Applied Engineering (ICSAE).

[43]  H. P. Evans,et al.  An investigation into mixed lubrication conditions using electrical contact resistance techniques , 2016 .

[44]  Y. Kadin,et al.  An experimental and theoretical study of surface rolling contact fatigue damage progression in hybrid bearings with artificial dents , 2016 .

[45]  H. P. Evans,et al.  Running-in and micropitting behaviour of steel surfaces under mixed lubrication conditions , 2016 .

[46]  U. Olofsson,et al.  In situ running-in analysis of ground gears , 2016 .

[47]  B. Alfredsson,et al.  Experimental Investigation of Shot Peening on Case Hardened SS2506 Gear Steel , 2017, Experimental Techniques.

[48]  H. P. Evans,et al.  Generation of Acoustic Emission from the running-in and subsequent micropitting of a mixed-elastohydrodynamic contact , 2018 .

[49]  H. P. Evans,et al.  Experimental and Numerical Study of Micropitting Initiation in Real Rough Surfaces in a Micro-elastohydrodynamic Lubrication Regime , 2018, Tribology Letters.

[50]  B. Alfredsson,et al.  Contact fatigue initiation and tensile surface stresses at a point asperity which passes an elastohydrodynamic contact , 2017, Tribology International.

[51]  F. Sadeghi,et al.  A Coupled Multibody Finite Element Model for Investigating Effects of Surface Defects on Rolling Contact Fatigue , 2019, Journal of Tribology.

[52]  R. Larsson,et al.  Mapping of the lubrication regimes in rough surface EHL contacts , 2019, Tribology International.

[53]  B. Alfredsson,et al.  Surface initiation of rolling contact fatigue at asperities considering slip, shear limit and thermal elastohydrodynamic lubrication , 2019, Tribology International.

[54]  R. Larsson,et al.  Micro-pitting Damage of Bearing Steel Surfaces under Mixed Lubrication Conditions: Effects of Roughness, Hardness and ZDDP Additive , 2019, Tribology International.

[55]  B. Alfredsson,et al.  The influence of gear surface roughness on rolling contact fatigue under thermal elastohydrodynamic lubrication with slip , 2020 .

[56]  An imprint method to produce surface asperities for EHL and RCF experiments , 2020, MethodsX.