Bubble column reactors

Bubble columns are intensively used as multiphase contactors and reactors in chemical, biochemical and petrochemical industries. They provide several advantages during operation and maintenance such as high heat and mass transfer rates, compactness and low operating and maintenance costs. Three-phase bubble column reactors are widely employed in reaction engineering, i.e. in the presence of a catalyst and in biochemical applications where microorganisms are utilized as solid suspensions in order to manufacture industrially valuable bioproducts. Investigation of design parameters characterizing the operation and transport phenomena of bubble columns have led to better understanding of the hydrodynamic properties, heat and mass transfer mechanisms and flow regime characteristics ongoing during the operation. Moreover, experimental studies are supported with computational fluid dynamics (CFDs) simulations and developed mathematical models to describe better the phenomena taking place in a bubble column reactor. This review focuses on bubble column reactors, their description, design and operation, application areas, fluid dynamics and regime analysis encountered and parameters characterizing the operation are presented together with the findings of published studies.

[1]  W. Deckwer,et al.  On the mechanism of heat transfer in bubble column reactors , 1980 .

[2]  R. V. Chaudhari,et al.  Effect of temperature on flow regimes and gas hold-up in a bubble column , 1986 .

[3]  S. Saxena,et al.  HEAT-TRANSFER AND GAS-HOLDUP STUDIES IN A BUBBLE COLUMN : AIR-WATER-GLASS BEAD SYSTEM , 1990 .

[4]  M. Duduković,et al.  Experimental study of gas‐induced liquid‐flow structures in bubble columns , 2001 .

[5]  Yoshinori Kawase,et al.  Phenomenological model for bubble column reactors: prediction of gas hold-ups and volumetric mass transfer coefficients , 2000 .

[6]  Y. Kawase.  The energy dissipation rate concept for turbulent heat and mass transfer in drag-reducing fluids , 1990 .

[7]  E. Borchers,et al.  Wärmeübergang in Blasensäulen. II. Messungen an viscosen Suspensionen , 1958 .

[8]  H. Kölbel,et al.  Wärmeübergang in Blasensäulen III. Messungen an gasdurchströmten Suspensionen , 1960 .

[9]  J. Joshi,et al.  Effect of superficial gas velocity on gas hold-up profiles in foaming liquids in bubble column reactors , 2003 .

[10]  Yong Kang,et al.  Dynamic characteristics of heat transfer coefficient in pressurized bubble columns with viscous liquid medium , 2002 .

[11]  H. Li,et al.  Heat Transfer and Hydrodynamics in a Three-Phase Slurry Bubble Column , 1997 .

[12]  A. Schumpe,et al.  Organic liquids in a bubble column: Holdups and mass transfer coefficients , 1987 .

[13]  Kiyomi Akita,et al.  Bubble Size, Interfacial Area, and Liquid-Phase Mass Transfer Coefficient in Bubble Columns , 1974 .

[14]  Dieter Mewes,et al.  Interfacial area density in bubbly flow , 1999 .

[15]  M. W. Miller,et al.  Enhancement and stabilization of the production of glucoamylase by immobilized cells of Aureobasidium pullulans in a fluidized-bed reactor , 1990, Applied Microbiology and Biotechnology.

[16]  K. Koide,et al.  GAS HOLDUP AND VOLUMETRIC LIQUID-PHASE MASS TRANSFER COEFFICIENT IN SOLID-SUSPENDED BUBBLE COLUMNS , 1984 .

[17]  Yoshinori Kawase,et al.  The prediction of gas hold-up in bubble column reactors: Newtonian and non-newtonian fluids , 1992 .

[18]  Yatish T. Shah,et al.  Design parameters estimations for bubble column reactors , 1982 .

[19]  W. Curtis,et al.  Inhibitory role of root hairs on transport within root culture bioreactors. , 2000, Biotechnology and bioengineering.

[20]  Nidal Hilal,et al.  Hydrodynamic studies in both bi-dimensional and three-dimensional bubble columns with a single sparger , 2003 .

[21]  Liang-Shih Fan,et al.  Gas-Liquid-Solid Fluidization Engineering , 1989 .

[22]  Vivek V. Ranade,et al.  Dynamics of gas-liquid flow in a rectangular bubble column: Experiments and single/multi-group CFD simulations , 2002 .

[23]  A. M. Moro,et al.  Glucose uptake rate as a tool to estimate hybridoma growth in a packed bed bioreactor , 1999 .

[24]  S. Asai,et al.  Gas hold-up in bubble columns , 1980 .

[25]  Maurice A. Bergougnou,et al.  Hydrodynamics and local heat transfer measurements in a bubble column with suspension of yeast , 2001 .

[26]  F. Yamashita.  Effect of liquid depth, column inclination and baffle plates on gas holdup in bubble columns. , 1985 .

[27]  S. H. Son,et al.  Large-scale growth and taxane production in cell cultures of Taxus cuspidata (Japanese yew) using a novel bioreactor , 2000, Plant Cell Reports.

[28]  M. Moo-Young,et al.  Design of Biochemical Reactors Mass Transfer Criteria for Simple and Complex Systems , 1981, Reactors and Reactions.

[29]  H. E. Hoelscher,et al.  Bubble swarm characteristics in bubble columns , 1976 .

[30]  J. H. Hills,et al.  The operation of a bubble column at high throughputs: I. Gas holdup measurements , 1976 .

[31]  K. Muroyama,et al.  PROPERTIES OF BUBBLE SWARM IN A SLURRY BUBBLE COLUMN , 1987 .

[32]  Snehal A. Patel,et al.  Measurement of gas holdups and sauter mean bubble diameters in bubble column reactors by dynamics gas disengagement method , 1992 .

[33]  L. Fan,et al.  Distribution of bubble properties in a gas‐liquid‐solid fluidized bed , 1984 .

[34]  Rajamani Krishna,et al.  Mass transfer in bubble columns , 2003 .

[35]  Takashi Akehata,et al.  BEHAVIOR OF BUBBLES IN LARGE SCALE BUBBLE COLUMN , 1979 .

[36]  Hanning Li,et al.  Influence of slurry concentrations on bubble population and their rise velocities in a three-phase slurry bubble column , 2000 .

[37]  S. D. Kim,et al.  Diagnosis of bubble distribution and mass transfer in pressurized bubble columns with viscous liquid medium , 1999 .

[38]  S. M. Barnett,et al.  Bubble motion and mass transfer in non‐Newtonian fluids , 1966 .

[39]  Robert W. Field,et al.  Bubble Column Reactors , 1991 .

[40]  Wolf-Dieter Deckwer,et al.  Hydrodynamic Properties of the Fischer-Tropsch Slurry Process , 1980 .

[41]  Rajamani Krishna,et al.  Volumetric mass transfer coefficients in slurry bubble columns operating in the churn-turbulent flow regime , 2004 .

[42]  G. A. Hughmark,et al.  Holdup and Mass Transfer in Bubble Columns , 1967 .

[43]  H. Haringa,et al.  MASS-TRANSFER AND BUBBLE-SIZE IN A BUBBLE-COLUMN UNDER PRESSURE , 1994 .

[44]  Kiyomi Akita,et al.  Gas Holdup and Volumetric Mass Transfer Coefficient in Bubble Columns. Effects of Liquid Properties , 1973 .

[45]  R. Mann,et al.  Dynamic gas disengagement: A new technique for assessing the behaviour of bubble columns , 1977 .

[46]  Jyeshtharaj B. Joshi,et al.  Regime transition in bubble columns: experimental and predictions , 2004 .

[47]  Liang-Shih Fan,et al.  Bubble flow characteristics in bubble columns at elevated pressure and temperature , 1998 .

[48]  Hanning Li,et al.  Survey of heat transfer mechanisms in a slurry bubble column , 2001 .

[49]  Irving Leibson,et al.  Rate of flow and mechanics of bubble formation from single submerged orifices. II. Mechanics of bubble formation , 1956 .

[50]  Shaoqing Wang,et al.  Gas holdup, liquid circulating velocity and mass transfer properties in a mini-scale external loop airlift bubble column , 2003 .

[51]  D. Scott,et al.  The role of gas phase momentum in determining gas holdup and hydrodynamic flow regimes in bubble column operations , 1994 .

[52]  R. Kumar,et al.  The Formation of Bubbles and Drops , 1970 .

[53]  R. Krishna,et al.  Gas holdup in slurry bubble columns: Effect of column diameter and slurry concentrations , 1997 .

[54]  Rajamani Krishna,et al.  Influence of increased gas density on hydrodynamics of bubble‐column reactors , 1994 .

[55]  R. Greasham,et al.  Continuous production of thienamycin in immobilized cell systems , 1986, Biotechnology and bioengineering.

[56]  Jyeshtharaj B. Joshi,et al.  Hydrodynamic stability of multiphase reactors , 2001 .

[57]  Yan Sun,et al.  Effects of product inhibition on continuous acetic acid production by immobilized Acetobacter aceti: Theoretical calculations , 1990 .

[58]  A. Schumpe,et al.  The gas disengagement technique for studying gas holdup structure in bubble columns , 1986 .

[59]  F. Larachi,et al.  Understanding gas-phase hydrodynamics in bubble columns: a convective model based on kinetic theory , 1997 .

[60]  Jyeshtharaj B. Joshi,et al.  CFD simulation of sparger design and height to diameter ratio on gas hold-up profiles in bubble column reactors , 2004 .

[61]  N. H. Thomas,et al.  Homogeneous–heterogeneous regime transition in bubble columns , 2001 .

[62]  Donald Nelson Miller,et al.  Scale‐up of agitated vessels gas‐liquid mass transfer , 1974 .

[63]  Shigenobu Tanaka,et al.  Gas Holdup and Overall Volumetric Absorption Coefficient in Bubble Columns with Suspended Solid Particles , 1972 .

[64]  H. Blanch,et al.  Bubble motion and mass transfer in non‐Newtonian fluids: Part I. Single bubble in power law and Bingham fluids , 1978 .

[65]  Gabriel Wild,et al.  Numerical simulation of multiphase flow in bubble column reactors. Influence of bubble coalescence and break-up , 2001 .

[66]  M. Moo-young,et al.  Heat transfer in bubble column reactors with newtonian and non-Newtonian fluids , 1987 .

[67]  D. Hempel,et al.  Liquid flow and phase holdup—measurement and CFD modeling for two-and three-phase bubble columns , 2002 .

[68]  A. Lübbert,et al.  Bubble column fluid dynamics, flow structures in slender columns with large-diameter ring-spargers , 2002 .

[69]  Pm Wilkinson,et al.  STUDIES ON GAS HOLDUP IN A BUBBLE COLUMN OPERATED AT ELEVATED-TEMPERATURES , 1988 .

[70]  Hanning Li,et al.  Analysis of flow patterns in bubble and slurry bubble columns based on local heat transfer measurements , 2002 .

[71]  Rajamani Krishna,et al.  A unified approach to the scale-up of gas—solid fluidized bed and gas—liquid bubble column reactors , 1994 .

[72]  Liang-Shih Fan,et al.  Maximum stable bubble size and gas holdup in high-pressure slurry bubble columns , 1999 .

[73]  A. K. Verma,et al.  Studies on surface to bulk ionic mass transfer in bubble column , 2003 .

[74]  Shigeharu Morooka,et al.  Liquid holdup and heat transfer coefficient between bed and wall in liquid solid and gas-liquid-solid fluidized beds , 1981 .

[75]  Wei Chen,et al.  Generalized dynamic modeling of local heat transfer in bubble columns , 2003 .

[76]  A. E. Sáez,et al.  EFFECT OF OPERATING CONDITIONS ON GAS HOLDUP IN SLURRY BUBBLE COLUMNS WITH A FOAMING LIQUID , 1992 .

[77]  Y. Shah,et al.  HOLDUP STRUCTURE IN HIGHLY VISCOUS NEWTONIAN AND NON-NEWTONIAN LIQUIDS IN BUBBLE COLUMNS , 1982 .

[78]  Clemens Merten,et al.  Bubble size distributions in a bubble column reactor under industrial conditions , 2002 .

[79]  Irving Leibson,et al.  Rate of flow and mechanics of bubble formation from single submerged orifices. I. Rate of flow studies , 1956 .

[80]  A. Schumpe,et al.  Gas-liquid interfacial areas in a bubble column with suspended solids , 1984 .

[81]  Rajamani Krishna,et al.  Influence of scale on the hydrodynamics of bubble column reactors: an experimental study in columns of 0.1, 0.4 and 1 m diameters , 2003 .

[82]  M. Ellis,et al.  Overexpression of alcohol dehydrogenase or pyruvate decarboxylase improves growth of hairy roots at reduced oxygen concentrations. , 2002, Biotechnology and bioengineering.

[83]  A. Schumpe,et al.  Gas density effect on mass transfer in three-phase sparged reactors , 1995 .

[84]  B. G. Kelkar,et al.  Hydrodynamics and axial mixing in a three-phase bubble column , 1982 .

[85]  V. V. Konsetov.  Heat transfer during bubbling of gas through liquid , 1966 .

[86]  Christophe Guy,et al.  Characterization of bubble column hydrodynamics with local measurements , 1999 .

[87]  S. D. Kim,et al.  Heat transfer characteristics in two‐ and three‐phase slurry‐fluidized beds , 1986 .

[88]  M. Al-Dahhan,et al.  Predictions of radial gas holdup profiles in bubble column reactors , 2001 .

[89]  Mamoru Ishii,et al.  Two-group interfacial area transport equations at bubbly-to-slug flow transition , 2000 .

[90]  W. Kast.  Analyse des wärmeübergangs in blasensäulen , 1962 .

[91]  Michel Roustan,et al.  A comparative study of gas hold-up, bubble size, interfacial area and mass transfer coefficients in stirred gas–liquid reactors and bubble columns , 2001 .

[92]  A. Schumpe,et al.  Viscous media in tower bioreactors: Hydrodynamic characteristics and mass transfer properties , 1987 .

[93]  D. Bukur,et al.  Gas hold-up in bubble columns for Fischer-Tropsch synthesis , 1987 .

[94]  L. Fan,et al.  Hydrodynamic characteristics of a gas‐liquid‐solid fluidized bed containing a binary mixture of particles , 1985 .

[95]  S. Katoh,et al.  Performance of the gas bubble column in molten salt systems , 1984 .

[96]  M. Otterbein,et al.  Interfacial area and volumetric mass transfer coefficient in a bubble reactor at elevated pressures , 2003 .

[97]  M. Lockett,et al.  Ideal bubbly flow and actual flow in bubble column , 1975 .

[98]  H. Kikukawa,et al.  Heat transfer coefficient in bubble columns , 1981 .

[99]  H. Delmas,et al.  Electrochemical probe for bubble size prediction in a bubble column , 1997 .

[100]  Rajamani Krishna,et al.  A MODEL FOR GAS HOLDUP IN BUBBLE COLUMNS INCORPORATING THE INFLUENCE OF GAS DENSITY ON FLOW REGIME TRANSITIONS , 1991 .

[101]  J. Ogbonna,et al.  Scale up of fuel ethanol production from sugar beet juice using loofa sponge immobilized bioreactor. , 2001, Bioresource technology.

[102]  Byung Hong Kim,et al.  Effect of CO partial pressure on cell-recycled continuous CO fermentation by Eubacterium limosum KIST612 , 2001 .

[103]  Liang-Shih Fan,et al.  Mechanism of heat transfer in bubbly liquid and liquid‐solid systems: Single bubble injection , 1992 .

[104]  A. Schumpe,et al.  Improved tools for bubble column reactor design and scale-up☆ , 1993 .

[105]  Rajamani Krishna,et al.  Gas holdup and mass transfer in bubble column reactors operated at elevated pressure. , 1999 .

[106]  Badie I. Morsi,et al.  Mass transfer characteristics in a large-scale slurry bubble column reactor with organic liquid mixtures , 2002 .

[107]  Tsao-Jen Lin,et al.  Effects of macroscopic hydrodynamics on heat transfer in bubble columns , 2001 .

[108]  H. Inoue,et al.  GAS HOLDUP IN BUBBLE COLUMNS , 1975 .

[109]  H. Kikukawa,et al.  Liquid-phase mixing in bubble columns: Effect of liquid properties , 1974 .

[110]  A. K. Jain,et al.  A correlation for gas holdup in turbulent coalescing bubble columns , 1986 .

[111]  P. Wilkinson,et al.  Design parameters estimation for scale‐up of high‐pressure bubble columns , 1992 .

[112]  Jyeshtharaj B. Joshi,et al.  A circulation cell model for bubble columns , 1979 .

[113]  A. Prakash,et al.  Analysis of bubble dynamics and local hydrodynamics based on instantaneous heat transfer measurements in a slurry bubble column , 1999 .

[114]  W. Deckwer,et al.  Unified correlation of heat transfer coefficients in three-phase fluidized beds , 1989 .