Solvothermal synthesis of α-PbO from lead dioxide and its electrochemical performance as a positive electrode material

Abstract Lead acid batteries have been widely used and have dominated the global secondary battery market. It is very important to recycle the spent batteries efficiently to eliminate possible pollution and to ensure sustainable production. In this paper, we report our investigation on the solvothermal treatment of PbO 2 , which is one of the model compounds for the positive active mixture, in methanol and the subsequent calcination of its product. The results show that the solvothermal treatment of PbO 2 in pure methanol at 140 °C can produce a mixture of PbO and lead oxide carbonate, which can be calcined at a temperature below 500 °C to produce α-PbO. The as-prepared PbO powders are rod-like particles of about 0.5 micrometer in diameter and several micrometers in length, which can achieve a high discharge capacity of 165 mAh g −1 at the discharge current density of 5 mA g −1 , and more than 90 mAh g −1 at 200 mA g −1 with excellent cycle stability. This study demonstrates a new way for the reuse of lead dioxide in spent lead acid batteries to produce highly active PbO.

[1]  V. Mymrin,et al.  Technological improvements in automotive battery recycling , 2007 .

[2]  J. Morales,et al.  Spray pyrolysis as a method for preparing PbO coatings amenable to use in lead-acid batteries , 2002 .

[3]  M. A. Rabah,et al.  Energy saving and pollution control for short rotary furnace in secondary lead smelters , 2001 .

[4]  R. Vasant Kumar,et al.  Preparation and characterization of nano-structured lead oxide from spent lead acid battery paste. , 2012, Journal of hazardous materials.

[5]  P. Impinnisi,et al.  A practical method to follow the evolution of electrochemically active areas during plate formation processes in lead acid batteries , 2000 .

[6]  T. T. Chen,et al.  The mineralogical characterization of lead-acid battery paste , 1996 .

[7]  M. Karimi,et al.  Synthesis of lead oxide nanoparticles by Sonochemical method and its application as cathode and anode of lead-acid batteries , 2008 .

[8]  S. Dou,et al.  Electrochemical performance of nanocrystalline lead oxide in VRLA batteries , 2001 .

[9]  R. V. Kumar,et al.  Leaching of waste battery paste components. Part 1: Lead citrate synthesis from PbO and PbO2 , 2009 .

[10]  R. Vasant Kumar,et al.  Preparation of basic lead oxide from spent lead acid battery paste via chemical conversion , 2012 .

[11]  D. Rand Background aspects of leady oxide production , 1989 .

[12]  W. Visscher,et al.  Cyclic voltammetry on lead electrodes in sulphuric acid solution , 1976 .

[13]  H. Karami,et al.  Synthesis of uniform nano-structured lead oxide by sonochemical method and its application as cathode and anode of lead-acid batteries , 2008 .

[14]  Z. Vaysgant,et al.  A low-temperature technique for recycling lead/acid battery scrap without wastes and with improved environmental control , 1995 .

[15]  S. Dou,et al.  Beneficial effects of red lead on non-cured plates for lead-acid batteries , 2003 .

[16]  M. Salavati‐Niasari,et al.  Preparation of PbO nanocrystals via decomposition of lead oxalate , 2009 .

[17]  David Finlow,et al.  The lead and lead-acid battery industries during 2002 and 2007 in China ☆ , 2009 .

[18]  Nerilso Bocchi,et al.  Lead recovery from a typical Brazilian sludge of exhausted lead-acid batteries using an electrohydrometallurgical process , 2002 .

[19]  A M Genaidy,et al.  An exploratory study of lead recovery in lead-acid battery lifecycle in US market: an evidence-based approach. , 2008, The Science of the total environment.

[20]  Timothy W. Ellis,et al.  The refining of secondary lead for use in advanced lead-acid batteries , 2010 .

[21]  David A. J. Rand,et al.  Aspects of lead/acid battery manufacture and performance , 1994 .