The electrical conduction and dielectric strength of SU-8
暂无分享,去创建一个
Cora Salm | Jurriaan Schmitz | Jan L. Visschers | Joost Melai | J. Schmitz | J. Visschers | Sander M. Smits | C. Salm | J. Melai | S. Smits
[1] Shuichi Shoji,et al. An all SU-8 microfluidic chip with built-in 3D fine microstructures , 2006 .
[2] D. F. Moore,et al. SU-8 thick photoresist processing as a functional material for MEMS applications , 2002 .
[3] M. Laudon,et al. Mechanical characterization of a new high-aspect-ratio near UV-photoresist , 1998 .
[4] Xin Zhang,et al. Fabrication of three-dimensional microstructures based on singled-layered SU-8 for lab-on-chip applications , 2006 .
[5] W. Miles Clift,et al. Removal of SU-8 photoresist for thick film applications , 2002 .
[6] B. Ziaie,et al. Remotely adjustable check-valves with an electrochemical release mechanism for implantable biomedical microsystems , 2007, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).
[7] C. H. Lee,et al. Fabrication of thick electroforming micro mould using a KMPR negative tone photoresist , 2008 .
[8] Study of crack formation in high-aspect ratio SU-8 structures on silicon , 2007 .
[9] M. J. Key,et al. On the radiation tolerance of SU-8, a new material for gaseous microstructure radiation detector fabrication , 2004 .
[10] J. Melai,et al. A Radiation Imaging Detector Made by Postprocessing a Standard CMOS Chip , 2008, IEEE Electron Device Letters.
[11] S. M. Sze,et al. Physics of semiconductor devices , 1969 .
[12] H. Pyo,et al. Study of SU‐8 to make a Ni master‐mold: Adhesion, sidewall profile, and removal , 2006, Electrophoresis.
[13] Steven J. Holmes,et al. Negative photoresists for optical lithography , 1997, IBM J. Res. Dev..
[14] M. Despont,et al. SU-8: a low-cost negative resist for MEMS , 1997 .
[15] C. Greiner,et al. SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography , 2007 .
[16] Cora Salm,et al. Reliability aspects of a radiation detector fabricated by post-processing a standard CMOS chip , 2008, Microelectron. Reliab..