Hybrid modeling and control of ICPT system with synchronous three-phase triple-parallel Buck converter

Aiming at the influence of coupling coefficient variation on the output voltage of a high-power LCC-S topology inductively coupled power transfer (ICPT) system, a synchronous three-phase triple-parallel Buck converter is used as the voltage adjustment unit. The control method for the three-phase current sharing of synchronous three-phase triple-parallel Buck converter and the constant voltage output ICPT system under the coupling coefficient variation is studied. Firstly, the hybrid model consisting of the circuit averaging model of the three-phase triple-parallel Buck converter and the generalized state-space average model for the LCC-S type ICPT system is established. Then, the control methods for three-phase current sharing of the synchronous three-phase triple-parallel Buck converter and constant voltage output of ICPT system are studied to achieve the multi-objective integrated control of the system. Finally, a 3.3 kW wireless charging system platform is built, the experimental results have verified the effectiveness of the proposed modeling and control method, and demonstrated the stability of the ICPT system.

[2]  Nikolai Dechev,et al.  Design of a wireless measurement system for use in wireless power transfer applications for implants , 2017 .

[3]  Jian-Min Wang,et al.  A Simple Control Scheme to Avoid the Sensing Noise for the DC–DC Buck Converter With Synchronous Rectifier , 2018, IEEE Transactions on Industrial Electronics.

[4]  Pavol Bauer,et al.  Adaptive Sliding-Mode Control for a Multiple-User Inductive Power Transfer System Without Need for Communication , 2013, IEEE Transactions on Industrial Electronics.

[5]  U. Madawala,et al.  A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems , 2011, IEEE Transactions on Industrial Electronics.

[6]  Gerry Moschopoulos,et al.  An Investigation on the Novel Use of High-Power Three-Level Converter Topologies to Improve Light-Load Efficiency in Low Power DC/DC Full-Bridge Converters , 2014, IEEE Transactions on Industrial Electronics.

[7]  Aiguo Patrick Hu.  Modeling a contactless power supply using GSSA method , 2009, 2009 IEEE International Conference on Industrial Technology.

[8]  Bocheng Bao,et al.  Asynchronous-Switching Map-Based Stability Effects of Circuit Parameters in Fixed Off-Time Controlled Buck Converter , 2016, IEEE Transactions on Power Electronics.

[9]  Yanjing Sun,et al.  Robust Control for the Relay ICPT System Under External Disturbance and Parametric Uncertainty , 2017, IEEE Transactions on Control Systems Technology.

[10]  Jiang Wang,et al.  Opportunities and challenges of metamaterial-based wireless power transfer for electric vehicles , 2018 .

[11]  Yue Sun,et al.  /spl mu/-Synthesis for Frequency Uncertainty of the ICPT System , 2013, IEEE Transactions on Industrial Electronics.

[12]  Zhang Yang,et al.  Study of Dual Resonance Point Characteristics and Maximum Output Power of ICPT Based on Double LCL Compensation , 2016 .

[13]  Mohamed Orabi,et al.  Proposed Switching Losses Model for Integrated Point-of-Load Synchronous Buck Converters , 2015, IEEE Transactions on Power Electronics.

[14]  D. Maksimovic,et al.  Small-Signal Discrete-Time Modeling of Digitally Controlled PWM Converters , 2007, IEEE Transactions on Power Electronics.

[15]  A.P. Hu,et al.  Improved power flow control for contactless moving sensor applications , 2004, IEEE Power Electronics Letters.

[16]  Huang Xiao-xia.  Current Balancing for Three-phase Buck-type Interleaving Parallel Rectifier , 2013 .