State of the art in wireless sensing with surface acoustic waves

Surface acoustic wave (SAW) devices can be turned into novel identification and sensor elements (transponders) that do not need any power supply and may be interrogated wirelessly. Such a transponder picks up an electromagnetic request signal and stores it until all echoes caused by multipath propagation have died away. Then, a characteristic response signal is beamed back to the interrogator unit. In radio-link sensors, a physical or chemical quantity influences the propagation properties of the SAW and consequently changes the response pattern of the device. This contribution surveys the operating principle of such sensors and their state-of-the-art performance. The discussion is supported by illustrative examples such as temperature sensors and sensors for mechatronic applications.

[1]  A. Pohl,et al.  Wirelessly interrogable SAW-sensors for vehicular applications , 1996, Quality Measurement: The Indispensable Bridge between Theory and Reality (No Measurements? No Science! Joint Conference - 1996: IEEE Instrumentation and Measurement Technology Conference and IMEKO Tec.

[2]  Xiaoqi Bao,et al.  SAW Temperature Sensor and Remote Reading System , 1987, IEEE 1987 Ultrasonics Symposium.

[3]  Leonhard Reindl,et al.  Radio signals for SAW ID tags and sensors in strong electromagnetic interference , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[4]  David Morgan,et al.  Surface-wave devices for signal processing , 1985 .

[5]  G. Scholl,et al.  Theory and application of passive SAW radio transponders as sensors , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  Franz L. Dickert,et al.  Telemetric surface acoustic wave chemical sensors , 1998, Proceedings of the 1998 IEEE International Frequency Control Symposium (Cat. No.98CH36165).

[7]  K. Yamanouchi,et al.  2.5 GHz-range SAW propagation and reflection characteristics and application to passive electronic tag and matched filter , 1993 .

[8]  G. K. Montress,et al.  A Miniature Hybrid Circuit SAW Oscillator Using an All Quartz Packaged Resonator , 1985, IEEE 1985 Ultrasonics Symposium.

[9]  Leonhard Reindl,et al.  Remote sensing of physical parameters by means of passive surface acoustic wave devices (“ID-TAG”) , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[10]  W. Robbins,et al.  A simple phenomenological model of tunable SAW devices using magnetostrictive thin films , 1988, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Leonhard Reindl,et al.  SAW devices as wireless passive sensors , 1996, 1996 IEEE Ultrasonics Symposium. Proceedings.

[12]  Werner Ruile,et al.  Programmable reflectors for SAW-ID-tags , 1993 .

[13]  Michael Voss,et al.  Mechatronic extension of a tap holder for process monitoring , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[14]  Gerhard Fischerauer,et al.  Surface acoustic wave sensors for high-temperature applications , 1998, Proceedings of the 1998 IEEE International Frequency Control Symposium (Cat. No.98CH36165).

[15]  Leonhard Reindl,et al.  Spread spectrum techniques for wirelessly interrogable passive SAW sensors , 1996, Proceedings of ISSSTA'95 International Symposium on Spread Spectrum Techniques and Applications.

[16]  J. Hornsteiner,et al.  Langasite for High Temperature Surface Acoustic Wave Applications , 1997 .

[17]  Donald C. Malocha,et al.  Remote sensor system using passive SAW sensors , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.