论文信息 - Removal of SOx and NOx over activated carbon fibers

Removal of SOx and NOx over activated carbon fibers

Abstract The recent development of de-SOx and de-NOx using activated carbon fibers (ACF) in Japan is introduced in this review comparing it with the conventional commercialized system. Pitch-based ACFs showed higher de-SOx activity than other ACFs from different precursors. De-SOx activity can be further modified by the heat-treatment, continuous and complete removal of SOx. ACF is also effective for removing NOx in the presence of NH4. The mechanisms of de-SOx and de-NOx on the surface of ACFs are proposed and discussed. Based on fundamental research results de-SOx, de-NOx and their combined processes are designed and proposed.

[1] G. Rochelle,et al. Fly ash recycle in dry scrubbing , 1985 .

[2] M. Yoshikawa,et al. Reduction of NO of very low concentration in air with NH3 at room temperature over calcined active carbon fibers , 1995 .

[3] P. Davini. Adsorption and desorption of SO2 on active carbon: The effect of surface basic groups , 1990 .

[4] M. Miller. Retrofit SO2 and NOx control technologies for coal‐fired power plants , 1986 .

[5] Karl Knoblauch,et al. Application of active coke in processes of SO2- and NOx-removal from flue gases☆ , 1981 .

[6] J. Martinez,et al. Reactivation of fly ash and calcium hydroxide mixtures for sulfur dioxide removal of flue gas , 1991 .

[7] Shin-Min Shih,et al. Calcium hydroxide/fly ash sorbents for sulfur dioxide removal , 1992 .

[8] P. S. Lowell,et al. Selection of Metal Oxides for Removing SO2 From Flue Gas , 1971 .

[9] M. Yoshikawa,et al. Oxidation of NO into NO2 over active carbon fibers , 1994 .