Ex situ determination of freely dissolved concentrations of hydrophobic organic chemicals in sediments and soils: basis for interpreting toxicity and assessing bioavailability, risks and remediation necessity

[1]  D. Reible,et al.  An analytical model for the fate and transport of performance reference compounds and target compounds around cylindrical passive samplers. , 2019, Chemosphere.

[2]  F. Smedes SSP silicone-, lipid- and SPMD-water partition coefficients of seventy hydrophobic organic contaminants and evaluation of the water concentration calculator for SPMD. , 2019, Chemosphere.

[3]  F. Smedes Silicone-water partition coefficients determined by cosolvent method for chlorinated pesticides, musks, organo phosphates, phthalates and more. , 2018, Chemosphere.

[4]  U. Ghosh,et al.  Evaluation of passive sampling polymers and nonequilibrium adjustment methods in a multiyear surveillance of sediment porewater PCBs , 2018, Environmental toxicology and chemistry.

[5]  R. Burgess,et al.  Using performance reference compounds to compare mass transfer calibration methodologies in passive samplers deployed in the water column , 2018, Environmental toxicology and chemistry.

[6]  C. Tobias,et al.  Investigation of a new passive sampler for the detection of munitions compounds in marine and freshwater systems , 2018, Environmental toxicology and chemistry.

[7]  Geanna M Flavetta,et al.  Advancing the Use of Passive Sampling in Risk Assessment and Management of Sediments Contaminated with Hydrophobic Organic Chemicals: Results of an International Ex Situ Passive Sampling Interlaboratory Comparison , 2018, Environmental science & technology.

[8]  R. Lohmann,et al.  Using Polyethylene Passive Samplers To Study the Partitioning and Fluxes of Polybrominated Diphenyl Ethers in an Urban River. , 2017, Environmental science & technology.

[9]  U. Ghosh,et al.  Analysis of Measurement Errors in Passive Sampling of Porewater PCB Concentrations under Static and Periodically Vibrated Conditions. , 2017, Environmental science & technology.

[10]  R. Luthy,et al.  Non-equilibrium passive sampling of hydrophobic organic contaminants in sediment pore-water: PCB exchange kinetics. , 2016, Journal of hazardous materials.

[11]  P. Gschwend,et al.  In situ passive sampling of sediments in the Lower Duwamish Waterway Superfund site: Replicability, comparison with ex situ measurements, and use of data. , 2016, Environmental pollution.

[12]  W. Brack,et al.  Predicting the bioaccumulation of polyaromatic hydrocarbons and polychlorinated biphenyls in benthic animals in sediments. , 2016, The Science of the total environment.

[13]  B. Escher,et al.  Combining Passive Sampling with Toxicological Characterization of Complex Mixtures of Pollutants from the Aquatic Environment. , 2016, Advances in biochemical engineering/biotechnology.

[14]  Philipp Mayer,et al.  Passive Sampling in Regulatory Chemical Monitoring of Nonpolar Organic Compounds in the Aquatic Environment. , 2016, Environmental science & technology.

[15]  J. Hermens,et al.  Mechanisms of Neutral and Anionic Surfactant Sorption to Solid-Phase Microextraction Fibers. , 2015, Environmental science & technology.

[16]  Charles Eadsforth,et al.  From Bioavailability Science to Regulation of Organic Chemicals. , 2015, Environmental science & technology.

[17]  J. Schubauer‐Berigan,et al.  Application of passive sampling for measuring dissolved concentrations of organic contaminants in the water column at three marine superfund sites , 2015, Environmental toxicology and chemistry.

[18]  J. Shine,et al.  The Gellyfish: An in situ equilibrium‐based sampler for determining multiple free metal ion concentrations in marine ecosystems , 2015, Environmental toxicology and chemistry.

[19]  M. Jonker,et al.  Quantifying the effects of temperature and salinity on partitioning of hydrophobic organic chemicals to silicone rubber passive samplers. , 2015, Environmental science & technology.

[20]  R. Luthy,et al.  Modeling uptake of hydrophobic organic contaminants into polyethylene passive samplers. , 2015, Environmental science & technology.

[21]  P. Gschwend,et al.  Validating the use of performance reference compounds in passive samplers to assess porewater concentrations in sediment beds. , 2014, Environmental science & technology.

[22]  T. Parkerton,et al.  Passive sampling in contaminated sediment assessment: Building consensus to improve decision making , 2014, Integrated environmental assessment and management.

[23]  Loretta A. Fernandez,et al.  Calculating the diffusive flux of persistent organic pollutants between sediments and the water column on the Palos Verdes shelf superfund site using polymeric passive samplers. , 2014, Environmental science & technology.

[24]  D. Reible,et al.  Remedy performance monitoring at contaminated sediment sites using profiling solid phase microextraction (SPME) polydimethylsiloxane (PDMS) fibers. , 2014, Environmental science. Processes & impacts.

[25]  M. Lydy,et al.  Passive sampling methods for contaminated sediments: State of the science for organic contaminants , 2014, Integrated environmental assessment and management.

[26]  P. Chapman,et al.  Passive sampling methods for contaminated sediments: Risk assessment and management , 2014, Integrated environmental assessment and management.

[27]  Sabine E Apitz,et al.  Passive sampling methods for contaminated sediments: Practical guidance for selection, calibration, and implementation , 2014, Integrated environmental assessment and management.

[28]  Todd Gouin,et al.  Passive sampling methods for contaminated sediments: Scientific rationale supporting use of freely dissolved concentrations , 2013, Integrated environmental assessment and management.

[29]  E. Suuberg,et al.  Performance of passive samplers for monitoring estuarine water column concentrations: 1. Contaminants of concern , 2013, Environmental toxicology and chemistry.

[30]  R. Lohmann,et al.  Challenges of using polyethylene passive samplers to determine dissolved concentrations of parent and alkylated PAHs under cold and saline conditions. , 2013, Environmental science & technology.

[31]  Dagny A. Ullmann,et al.  Passive equilibrium sampler for in situ measurements of freely dissolved concentrations of hydrophobic organic chemicals in sediments. , 2013, Environmental science & technology.

[32]  J. Hermens,et al.  Using polyacrylate-coated SPME fibers to quantify sorption of polar and ionic organic contaminants to dissolved organic carbon. , 2013, Environmental science & technology.

[33]  L. Lave Risk Assessment and Management , 2013, Advances in Risk Analysis.

[34]  R. Luthy,et al.  Polyethylene-water partitioning coefficients for parent- and alkylated-polycyclic aromatic hydrocarbons and polychlorinated biphenyls. , 2013, Environmental science & technology.

[35]  Foppe Smedes,et al.  Multi-ratio equilibrium passive sampling method to estimate accessible and pore water concentrations of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in sediment. , 2013, Environmental science & technology.

[36]  P. Mayer,et al.  Sensitive equilibrium sampling to study polychlorinated biphenyl disposition in Baltic Sea sediment. , 2012, Environmental science & technology.

[37]  C. A. V. van Gestel,et al.  Development of QSARs for the toxicity of chlorobenzenes to the soil dwelling springtail Folsomia candida , 2012, Environmental toxicology and chemistry.

[38]  M. Hodson,et al.  Passive samplers provide a better prediction of PAH bioaccumulation in earthworms and plant roots than exhaustive, mild solvent, and cyclodextrin extractions. , 2012, Environmental science & technology.

[39]  S. Hawthorne,et al.  Measuring picogram per liter concentrations of freely dissolved parent and alkyl PAHs (PAH-34), using passive sampling with polyoxymethylene. , 2011, Analytical chemistry.

[40]  R. Lohmann,et al.  Role of black carbon in the sorption of polychlorinated dibenzo-p-dioxins and dibenzofurans at the Diamond Alkali superfund site, Newark Bay, New Jersey. , 2011, Environmental science & technology.

[41]  Amy M. P. Oen,et al.  In situ measurement of PCB pore water concentration profiles in activated carbon-amended sediment using passive samplers. , 2011, Environmental science & technology.

[42]  M. Jonker,et al.  Assessing the bioavailability of complex petroleum hydrocarbon mixtures in sediments. , 2011, Environmental science & technology.

[43]  T. Harner,et al.  A rapidly equilibrating, thin film, passive water sampler for organic contaminants; characterization and field testing. , 2011, Environmental pollution.

[44]  M. Jonker,et al.  A closer look at bioaccumulation of petroleum hydrocarbon mixtures in aquatic worms , 2010, Environmental toxicology and chemistry.

[45]  Loretta A. Fernandez,et al.  Using performance reference compounds in polyethylene passive samplers to deduce sediment porewater concentrations for numerous target chemicals. , 2009, Environmental science & technology.

[46]  K. Booij,et al.  Polymer-water partition coefficients of hydrophobic compounds for passive sampling: application of cosolvent models for validation. , 2009, Environmental science & technology.

[47]  M. Jonker,et al.  PAH bioavailability in field sediments: comparing different methods for predicting in situ bioaccumulation. , 2009, Environmental science & technology.

[48]  S. Bay,et al.  A passive sampler based on solid‐phase microextraction for quantifying hydrophobic organic contaminants in sediment pore water , 2009, Environmental toxicology and chemistry.

[49]  P. Grathwohl,et al.  LFERs for soil organic carbon-water distribution coefficients (Koc) at environmentally relevant sorbate concentrations. , 2009, Environmental science & technology.

[50]  Loretta A. Fernandez,et al.  Measurement of freely dissolved PAH concentrations in sediment beds using passive sampling with low-density polyethylene strips. , 2009, Environmental science & technology.

[51]  H. Arp,et al.  Freely dissolved concentrations and sediment-water activity ratios of PCDD/Fs and PCBs in the open Baltic Sea. , 2008, Environmental science & technology.

[52]  Gijs D Breedveld,et al.  Assessing PAH and PCB emissions from the relocation of harbour sediments using equilibrium passive samplers. , 2008, Chemosphere.

[53]  P. Mayer,et al.  Determining the chemical activity of hydrophobic organic compounds in soil using polymer coated vials , 2008, Chemistry Central journal.

[54]  S. Hawthorne,et al.  Predicting PAH bioaccumulation and toxicity in earthworms exposed to manufactured gas plant soils with solid-phase microextraction. , 2007, Environmental science & technology.

[55]  J. Klánová,et al.  Polymer selection for passive sampling: a comparison of critical properties. , 2007, Chemosphere.

[56]  F. Gobas,et al.  Characterization of polycyclic aromatic hydrocarbon bioavailability in estuarine sediments using thin‐film extraction , 2007, Environmental toxicology and chemistry.

[57]  R. Schwarzenbach,et al.  The Challenge of Micropollutants in Aquatic Systems , 2006, Science.

[58]  J. Hermens,et al.  Freely dissolved pore water concentrations and sorption coefficients of PAHs in spiked, aged, and field-contaminated soils. , 2006, Environmental science & technology.

[59]  J. Hermens,et al.  Freely dissolved concentrations of PAHs in soil pore water: measurements via solid-phase extraction and consequences for soil tests. , 2006, Environmental science & technology.

[60]  A. Koelmans,et al.  Extensive sorption of organic compounds to black carbon, coal, and kerogen in sediments and soils: mechanisms and consequences for distribution, bioaccumulation, and biodegradation. , 2005, Environmental science & technology.

[61]  R. Zare,et al.  Phenanthrene and pyrene sorption and intraparticle diffusion in polyoxymethylene, coke, and activated carbon. , 2005, Environmental science & technology.

[62]  J. Shine,et al.  Equilibrium-based sampler for determining Cu2+ concentrations in aquatic ecosystems. , 2004, Environmental science & technology.

[63]  Richard Woodward,et al.  The organisation for economic cooperation and development , 2004, The SAGE Encyclopedia of Higher Education.

[64]  A. Koelmans,et al.  Sorption of polycyclic aromatic hydrocarbons to oil contaminated sediment: unresolved complex? , 2003, Environmental science & technology.

[65]  K. Booij,et al.  Dissolved PCBs, PAHs, and HCB in pore waters and overlying waters of contaminated harbor sediments. , 2003, Environmental science & technology.

[66]  Foppe Smedes,et al.  Spiking of performance reference compounds in low density polyethylene and silicone passive water samplers. , 2002, Chemosphere.

[67]  A. Koelmans,et al.  Polyoxymethylene solid phase extraction as a partitioning method for hydrophobic organic chemicals in sediment and soot. , 2001, Environmental science & technology.

[68]  M. Alexander,et al.  Aging, bioavailability, and overestimation of risk from environmental pollutants , 2000 .

[69]  Foppe Smedes,et al.  Calibrating the uptake kinetics of semipermeable membrane devices using exposure standards , 1998 .

[70]  S. D. Cunningham,et al.  SEQUESTRATION OF HYDROPHOBIC ORGANIC CONTAMINANTS BY GEOSORBENTS , 1997 .

[71]  W. Tych,et al.  IN SITU HIGH RESOLUTION MEASUREMENTS OF FLUXES OF NI, CU, FE, AND MN AND CONCENTRATIONS OF ZN AND CD IN POREWATERS BY DGT , 1995 .

[72]  C. E. Cowan,et al.  Technical basis for establishing sediment quality criteria for nonionic organic chemicals using equilibrium partitioning , 1991 .

[73]  Organisation for Economic Cooperation and Development,et al.  Organisation for economic cooperation and development , 1998 .

[74]  D. Reible,et al.  Internal and external transport significance for predicting contaminant uptake rates in passive samplers. , 2015, Chemosphere.

[75]  R. Burgess,et al.  Equilibrium Partitioning Sediment Benchmarks (ESBs) for the Protection of Benthic Organisms: Procedures for the Determination of the Freely Dissolved Interstitial Water Concentrations of Nonionic Organics , 2012 .

[76]  K. Booij,et al.  Guidelines for passive sampling of hydrophobic contaminants in water using silicone rubber samplers , 2012 .

[77]  K. Booij,et al.  Guidelines for passive sampling of hydrophobic contaminants inwater using silicone rubber samplers. ICES Techniques in MarineEnvironmental Sciences No. 52. , 2012 .

[78]  Jana Klanova,et al.  Calibration of silicone rubber passive samplers: experimental and modeled relations between sampling rate and compound properties. , 2010, Environmental science & technology.

[79]  Janusz Pawliszyn,et al.  Protocol for solid-phase microextraction method development , 2010, Nature Protocols.

[80]  L. A. Fernandez Polyethylene passive samplers for measuring hydrophobic organic chemical concentrations in sediment porewaters and their use in predicting bioaccumulation in soft-shell clams (Mya arenaria) from sites near Boston, MA , 2010 .

[81]  Gerald T. Ankley,et al.  Methods for measuring the toxicity and bioaccumulation of sediment-associated contaminants with freshwater invertebrates , 1994 .

[82]  K. Dickson,et al.  Fate and effects of sediment-bound chemicals in aquatic systems , 1984 .

[83]  Jeanine Weekes Schroer,et al.  The Finite String Newsletter Abstracts of Current Literature Glisp User's Manual , 2022 .

[84]  D. W. Nelson,et al.  Total Carbon, Organic Carbon, and Organic Matter 1 , 1982 .

[85]  S. Karickhoff,et al.  SORPTION OF HYDROPHOBIC POLLUTANTS ON NATURAL SEDIMENTS , 1979 .