Failure mode and effect analysis on safety critical components of space travel

Article history: Received March 25, 2015 Received in revised format 28 March 2015 Accepted 12 May 2015 Available online May 14 2015 Sending men to space has never been an ordinary activity, it requires years of planning and preparation in order to have a chance of success. The payoffs of reliable and repeatable space flight are many, including both Commercial and Military opportunities. In order for reliable and repeatable space flight to become a reality, catastrophic failures need to be detected and mitigated before they occur. It can be shown that small pieces of a design which seem ordinary can create devastating impacts if not designed and tested properly. This paper will address the use of a Failure Mode, Effects, and Criticality Analysis (FMECA) with modified Risk Priority Number (RPN) and its application to safety critical design components of shuttle liftoff. An example will be presented here which specifically focuses on the Solid Rocket Boosters (SRBs) to illustrate the FMECA approach to reliable space travel. Growing Science Ltd. All rights reserved. 5 © 201

[1]  Chris Dale,et al.  Safety-Critical Systems: Problems, Process and Practice - Proceedings of the Seventeenth Safety-Critical Systems Symposium, Brighton, UK, February 3-5, 2009 , 2009, SSS.

[2]  J. B. Bowles,et al.  The new SAE FMECA standard , 1998, Annual Reliability and Maintainability Symposium. 1998 Proceedings. International Symposium on Product Quality and Integrity.

[3]  Jonathan P. Bowen.  SAFETY-CRITICAL SYSTEMS , 2000 .

[4]  Eugene Babeshko,et al.  Choosing FMECA-Based Techniques and Tools for Safety Analysis of Critical Systems , 2012 .

[5]  Fiorenzo Franceschini,et al.  A new approach for evaluation of risk priorities of failure modes in FMEA , 2001 .

[6]  Miguel A. de Miguel,et al.  Model-based integration of safety analysis and reliable software development , 2005, 10th IEEE International Workshop on Object-Oriented Real-Time Dependable Systems.

[7]  Wang Shaoping,et al.  Reliability analysis on combination of FMECA and FTA for redundant actuator system , 1999, Gateway to the New Millennium. 18th Digital Avionics Systems Conference. Proceedings (Cat. No.99CH37033).

[8]  B. T. McKinney.  FMECA, the right way , 1991, Annual Reliability and Maintainability Symposium. 1991 Proceedings.

[9]  Aftab Ali Haider,et al.  A Survey of Safety Analysis Techniques for Safety Critical Systems , 2013 .

[10]  Balbir S. Dhillon,et al.  GROUP-BASED FAILURE EFFECTS ANALYSIS , 2005 .

[11]  Marco Bozzano,et al.  Design and Safety Assessment of Critical Systems , 2010 .

[12]  Kosuke Ishii,et al.  Design Process Error Proofing: Failure Modes and Effects Analysis of the Design Process , 2007 .

[13]  Gionata Carmignani,et al.  An integrated structural framework to cost-based FMECA: The priority-cost FMECA , 2009, Reliab. Eng. Syst. Saf..

[14]  J. L. Buzzatto.  Failure mode, effects and criticality analysis (FMECA) use in the Federal Aviation Administration (FAA) reusable launch vehicle (RLV) licensing process , 1999, Gateway to the New Millennium. 18th Digital Avionics Systems Conference. Proceedings (Cat. No.99CH37033).

[15]  Ahmed Tijjani Dahiru.  A SIMPLIFIED METHOD OF FAST TRACKING FMECA USING SMART SOFTWARE TOOL: A CASE STUDY , 2014 .

[16]  Tor Stålhane,et al.  Modification of safety critical systems: an assessment of three approaches , 1998, Microprocess. Microsystems.