Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

In this article, the design and analysis of a hybrid trailing edge control surface of an unmanned aerial vehicle are presented. The structural design was performed to increase and decrease the camber of the control surface to match selected airfoil profiles. The design was first analyzed with the help of finite element method to assess the morphing capability. The morphed control surface was then analyzed aerodynamically and comparisons with the original target profiles were made. According to the aerodynamic analyses, it was concluded that the control surface can successfully morph into target profiles with very minor changes in the target aerodynamic values while still ensuring the structural integrity and the safety of the control surface.

[1]  A Wildschek,et al.  An all-composite, all-electric, morphing trailing edge device for flight control on a blended-wing-body airliner , 2010 .

[2]  J. Szodruch,et al.  Variable wing camber for transport aircraft , 1988 .

[3]  Jonathan D. Bartley-Cho,et al.  Development of High-rate, Adaptive Trailing Edge Control Surface for the Smart Wing Phase 2 Wind Tunnel Model , 2004 .

[4]  Nenad D. Pavlović,et al.  Development of a new adaptive shape morphing compliant structure with embedded actuators , 2016 .

[5]  Michael I. Friswell,et al.  International Conference on Adaptive Structures and Technologies ( ICAST ) University Park , Pennsylvania , October 4 – 6 , 2010 1 Morphing Trailing Edges with Shape Memory Alloy Rods , 2010 .

[6]  Zheng Min,et al.  Aircraft morphing wing concepts with radical geometry change , 2010 .

[7]  Shaker A. Meguid,et al.  Shape morphing of aircraft wing: Status and challenges , 2010 .

[8]  L. F. Campanile,et al.  The Belt-Rib Concept: A Structronic Approach to Variable Camber , 2000 .

[9]  Liu Shili,et al.  Optimal Design of Compliant Trailing Edge for Shape Changing , 2008 .

[10]  Hans Peter Monner,et al.  Realization of an optimized wing camber by using formvariable flap structures , 2001 .

[11]  Daniel J. Inman,et al.  A Review of Morphing Aircraft , 2011 .

[12]  Hiroshi Furuya,et al.  Variable geometry truss and its application to deployable truss and space crane arm , 1985 .

[13]  Ephrahim Garcia,et al.  Morphing unmanned aerial vehicles , 2011 .

[14]  Roeland De Breuker,et al.  A multi-fidelity, multi-disciplinary analysis and optimization framework for the design of morphing UAV wings , 2015 .

[15]  Shijun Guo,et al.  Modeling and nonlinear aeroelastic analysis of a wing with morphing trailing edge , 2013 .

[16]  Ercan Gürses,et al.  A HYBRID TRAILING EDGE CONTROL SURFACE CAPABLE OF CAMBER AND DECAMBER MORPHING , 2015 .

[17]  Terrence A. Weisshaar,et al.  Morphing Aircraft Systems: Historical Perspectives and Future Challenges , 2013 .