Preparation and characterization of biodegradable polyurethanes composites containing thermally treated attapulgite nanorods
暂无分享,去创建一个
[1] J. Chen,et al. Preparation of poly(ether-block-amide)/attapulgite mixed matrix membranes for CO2/N2 separation , 2016 .
[2] J. Pallarès,et al. Influence of acid–base properties of calcined MgAl and CaAl layered double hydroxides on the catalytic glycerol etherification to short-chain polyglycerols , 2015 .
[3] Lu Zeng,et al. Novel method for preparation of calcined kaolin intercalation compound-based geopolymer , 2014 .
[4] Wei Cui,et al. Effect of silica coating thickness on the thermal conductivity of polyurethane/SiO2 coated multiwalled carbon nanotube composites , 2014 .
[5] S. Rossignol,et al. Feasibility of producing geopolymers from two different Tunisian clays before and after calcination at various temperatures , 2014 .
[6] K. Yeung,et al. Synthesis and characterization of novel hyperbranched polyimides/attapulgite nanocomposites , 2013 .
[7] L. Boudriche,et al. Surface properties evolution of attapulgite by IGC analysis as a function of thermal treatment , 2012 .
[8] Hongxiang Chen,et al. Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite , 2012 .
[9] Feng Chen,et al. Mechanical and thermal properties of attapulgite clay reinforced polymethylmethacrylate nanocomposites , 2011 .
[10] T. Sauer,et al. Revisiting the block method for evaluating thermal conductivities of clay and granite , 2011 .
[11] R. Retoux,et al. Microwave sintering of nano-sized ZnO synthesized by a liquid route , 2011 .
[12] Meirong Wang,et al. Influence of calcination temperature of kaolin on the structure and properties of final geopolymer , 2010 .
[13] S. Nutt,et al. Effects of organophilic-modified attapulgite nanorods on thermal and mechanical behavior of segmented polyurethane elastomers , 2010 .
[14] Yuming Zhou,et al. Helical polyurethane@attapulgite nanocomposite: Preparation, characterization and study of optical activity , 2009 .
[15] I. Vroman,et al. Biodegradable Polymers , 2009, Materials.
[16] S. Nutt,et al. Synthesis and characterization of organically modified attapulgite/polyurethane nanocomposites , 2008 .
[17] A. Vik,et al. Effect of calcination conditions and precursor proportions on the properties of YSZ nanoparticles obtained by modified sol–gel route , 2008 .
[18] J. Youk,et al. Effective preparation and characterization of montmorillonite/poly(ε‐caprolactone)‐based polyurethane nanocomposites , 2008 .
[19] F. Malherbe,et al. Thermoplastic biodegradable polyurethanes: the effect of chain extender structure on properties and in-vitro degradation. , 2007, Biomaterials.
[20] R. Oréfice,et al. Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions , 2007 .
[21] C. Laurencin,et al. Biodegradable polymers as biomaterials , 2007 .
[22] Qiang Fu,et al. Synthesis and degradation of nontoxic biodegradable waterborne polyurethanes elastomer with poly(ε-caprolactone) and poly(ethylene glycol) as soft segment , 2007 .
[23] Philippe Dubois,et al. From controlled ring-opening polymerization to biodegradable aliphatic polyester: Especially poly(β-malic acid) derivatives , 2006 .
[24] M. Vallet‐Regí,et al. Long term degradation of poly(ɛ-caprolactone) films in biologically related fluids , 2006 .
[25] K. Shing,et al. Rod‐Like Silicate‐Epoxy Nanocomposites , 2005 .
[26] Zhiming Yu,et al. Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond , 2005 .
[27] C. Soles,et al. Moisture absorption into ultrathin hydrophilic polymer films on different substrate surfaces , 2005 .
[28] R. Sanderson,et al. Nano-structure phosphorus-containing polyurethane dispersions: synthesis and crosslinking with melamine formaldehyde resin , 2003 .
[29] Y. Lee,et al. Separation of toluene/nitrogen through segmented polyurethane and polyurethane urea membranes with different soft segments , 2002 .
[30] Enrico Drioli,et al. New breathable and waterproof coatings for textiles: effect of an aliphatic polyurethane on the formation of PEEK-WC porous membranes , 2002 .
[31] M. Okada. Chemical syntheses of biodegradable polymers , 2002 .
[32] K. Wei,et al. Hydrogen bonding and mechanical properties in segmented montmorillonite/polyurethane nanocomposites of different hard segment ratios , 2001 .
[33] Mao Xu,et al. Crystallinity and morphology of segmented polyurethanes with different soft-segment length , 1996 .
[34] A. Pennings,et al. Extruder synthesis of a new class of polyurethanes : Polyacylurethanes based on poly ( epsilon-caprolactone ) oligomers , 2005 .
[35] H. Jeong,et al. Morphology and properties of waterborne polyurethane/clay nanocomposites , 2003 .
[36] G. Abraham,et al. Hydrophilic hybrid IPNs of segmented polyurethanes and copolymers of vinylpyrrolidone for applications in medicine. , 2001, Biomaterials.