FEM and Experimental Study on Mechanical Property of Integrated Container Building

Recently, a growing number of the containers have been used in the building structures, therefore, the full size container stiffness have been studied under the longitudinal load, including the 20 ft container, 40 ft container and the 20 ft combined container. Firstly, the full size container experiment has been studied, and then, the load–displacement curve and load-stress curve have been got. Secondly, based on the nonlinear finite element software of Abaqus, the container model has been established and analyzed. By comparing with the load–displacement curves and load-stress values of experiment, the finite element model has been verified. Finally, based on the verified finite element model, the parametric analysis of the corrugated sheeting size, corrugated sheeting cross section, elasticity modulus of top side beam, and every sheeting action for container stiffness has been given, and the design advice of single and combined container has been given. The research results have made feasible in design and construction of container buildings and provided some references to corresponding specification preparation.

[1]  Katsuyuki Suzuki,et al.  Experimental and numerical analysis of container stack dynamics using a scaled model test , 2012 .

[2]  Aguiar de Souza Vinicius.  Study on the Dynamic Response of Container Stacks Using Non-Linear Finite Element Analysis , 2011 .

[3]  Ying Qin,et al.  Flexural behavior of anchor horizontal boundary element in steel plate shear wall , 2017 .

[4]  Ercan Işık,et al.  Performance based assessment of steel frame structures by different material models , 2017 .

[5]  Xiao Xiong Zha,et al.  Study on the Optimal Design of the Members of Contaniner Building with Building Materials I: Side Board Optimization , 2013 .

[6]  Katsuyuki Suzuki,et al.  Experimental and numerical analysis of container multiple stacks dynamics using a scaled model , 2013 .

[7]  Ryan E. Smith,et al.  Prefab Architecture: A Guide to Modular Design and Construction , 2010 .

[8]  Xiaoxiong Zha,et al.  Theoretical and experimental studies on in-plane stiffness of container structure with holes , 2016 .

[9]  V. Prakash,et al.  Modeling and simulation of cargo containers , 1989 .

[10]  Halil Sezen,et al.  Evaluation, modeling, and analysis of shipping container building structures , 2012 .

[11]  Jure Kotnik.  New Container Architecture: Design Guide + 30 Case Studies , 2013 .

[12]  Zhonghe Han,et al.  Measurement and Prediction Method of Compressibility Factor at High Temperature and High Pressure , 2016 .

[13]  Tore Børvik,et al.  On the ballistic and blast load response of a 20ft ISO container protected with aluminium panels filled with a local mass -Phase II. Validation of protective system , 2008 .

[14]  Xiaoxiong Zha,et al.  FEM and experimental study on mechanical property of container building with holes , 2017 .

[15]  Katsuyuki Suzuki,et al.  On the vibrational characteristics of a two-tier scaled container stack , 2011 .

[16]  Benjamin Brunn Dipl.-Ing. Sfi,et al.  Die Containerverbindung für die neue indische Antarktis-Forschungsstation , 2017 .

[17]  Marc Levinson,et al.  The Box: How the Shipping Container Made the World Smaller and the World Economy Bigger , 2006 .

[18]  John Michael Davies,et al.  Manual of Stressed Skin Diaphragm Design , 1987 .

[19]  Nan Gui,et al.  Advanced approaches of modeling and measurement for turbulence and heat transfer , 2016 .

[20]  Ben F Harrison.  Blast resistant modular buildings for the petroleum and chemical processing industries. , 2003, Journal of hazardous materials.

[21]  Xiao Xiong Zha,et al.  Study on the Optimal Design of the Members of Contaniner Building with Building Materials II: Joint and Corner Column Optimization , 2013 .

[22]  Xiaoxiong Zha,et al.  Finite Element Study of Container Structure under Normal and High Temperature , 2016 .

[23]  Julia Bergmann,et al.  Container atlas : a practical guide to container architecture , 2010 .

[24]  Benjamin Brunn,et al.  Die Containerverbindung für die neue indische Antarktis‐Forschungsstation , 2017 .

[25]  Xiaoxiong Zha,et al.  Theoretical and experimental studies on in-plane stiffness of integrated container structure , 2016 .