A monolithically integrated low temperature MEMS and HgCdTe infrared detector technology has been implemented and characterised. The MEMS-based optical filter, integrated with an infrared detector, selects narrow wavelength bands in the range from 1.6 to 2.5 μm within the short-wavelength infrared (SWIR) region of the electromagnetic spectrum. The entire fabrication process is compatible with two-dimensional infrared focal plane array technology. The fabricated device consists of an HgCdTe SWIR photoconductor, two distributed Bragg mirrors formed of Ge-SiO-Ge, a sacrificial spacer layer within the cavity, which is then removed to leave an air-gap, and a silicon nitride membrane for structural support. The tuning spectrum from fabricated MEMS filters on photoconductive detectors shows a wide tuning range and high percentage transmission is achieved with a tuning voltage of only 7.5 V. The FWHM ranged from 95-105 nm over a tuning range of 2.2 μm to 1.85 μm. Finite element modelling of various geometries for the silicon nitride membrane will also be presented. The modelling is used to determine the best geometry in terms of fill factor, voltage displacement prediction and membrane bowing.
[1]
J. Dell,et al.
Tunable Fabry-Pérot cavities fabricated from PECVD silicon nitride employing zinc sulphide as the sacrificial layer
,
2001
.
[2]
K. Fynn,et al.
Improved device technology for epitaxial Hg1-xCdxTe infrared photoconductor arrays
,
1994
.
[3]
Han Huang,et al.
Evaluation Of Elastic Modulus And Stress Gradient Of PECVD Silicon Nitride Thin Films
,
2004
.
[4]
F. Ma,et al.
HgCdTe electron avalanche photodiodes
,
2004
.
[5]
G. Hoffman,et al.
Stress in films of silicon monoxide
,
1967
.