Effect of tool shoulder and pin probe profiles on friction stirred aluminum welds — a comparative study

In marine application, marine grade steel is generally used for haul and superstructures. However, aluminum has also become a good choice due to its lightweight qualities, while rusting of aluminum is minimal compared to steel. In this paper a study on friction stir welding of aluminum alloys was presented. The present investigation deals with the effects of different friction stir welding tool geometries on mechanical strength and the microstructure properties of aluminum alloy welds. Three distinct tool geometries with different types of shoulder and tool probe profiles were used in the investigation according to the design matrix. The effects of each tool shoulder and probe geometry on the weld was evaluated. It was also observed that the friction stir weld tool geometry has a significant effect on the weldment reinforcement, microhardness, and weld strength.

[1]  S. Rajakumar,et al.  Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075–T6 aluminium alloy , 2010 .

[2]  Hidetoshi Fujii,et al.  Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys , 2006 .

[3]  Hiroyuki Kokawa,et al.  Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063 , 2002 .

[4]  W. M. Thomas,et al.  Friction Stir Butt Welding , 1991 .

[5]  Rajiv S. Mishra,et al.  Microstructural investigation of friction stir welded 7050-T651 aluminium , 2003 .

[6]  Lawrence E Murr,et al.  Flow Patterns During Friction Stir Welding , 2013 .

[7]  Liu Yujun,et al.  A New Check Method of Lifting Padeyes Based on Frictionless Cylindrical Contact Theory , 2009 .

[8]  Pedro Vilaça,et al.  Material flow in heterogeneous friction stir welding of thin aluminium sheets: Effect of shoulder geometry , 2008 .

[9]  A. Scialpi,et al.  Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy , 2007 .

[10]  E. D. Nicholas,et al.  Feasibility of friction stir welding steel , 1999 .

[11]  Nisith Ranjan Mandal,et al.  Experimental Study on Friction Stir Welding of Marine Grade Aluminum Alloy , 2009 .

[12]  Seung-Boo Jung,et al.  Evaluation of the microstructure and mechanical properties of friction stir welded 6005 aluminum alloy , 2003 .

[13]  A. Kurt,et al.  The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process , 2004 .