Preparation of Release-Paper-Free, Pressure-Sensitive-Adhesive Paper Using an Interfacial Polymerization Reaction on the Paper Surface

An interfacial polymerization reaction was used to prepare a pressure-sensitive adhesive paper that did not require release paper (PSAPwithout). Filter paper impregnated with an oil–water emulsion comprising ethylenediamine (EDA) and pressure-sensitive adhesive (PSA) was immersed in a solution of terephthaloyl chloride in cyclohexane, and the polyamide film containing the PSA attached itself to the treated paper surface. The pressure-sensitive-adhesive paper (PSAP) prepared by employing this interfacial polymerization did not require the use of release paper. In the case of the PSAPwithout samples prepared using 2.5%, 5%, and 10% EDA and 60 mL of a 35% PSA–cyclohexane solution, the peel strengths were 460, 493, and 438 mN, respectively. The PSAPwithout prepared under these conditions adhered sufficiently to the aluminum foil after a hot-press treatment. An EDA concentration of 5% and a 60 mL volume of the 35% PSA–cyclohexane solution maximized the adhesiveness of the PSAPwithout.

[1]  H. Ichiura,et al.  Polyurea films prepared by interfacial polymerization on a paper surface: sustained release of N,N-diethyl-3-methylbenzamide , 2015, Polymer Bulletin.

[2]  P. Wei,et al.  Predictions and measurements of interfacial adhesion among encapsulated thin films of flexible devices , 2015 .

[3]  Yadong Wang,et al.  An oligomeric switch that rapidly decreases the peel strength of a pressure-sensitive adhesive , 2014 .

[4]  H. Ichiura,et al.  Low temperature-dependence of N,N-dimethyl-3-methylbenzamide (DEET) release from a functional paper containing paraffin–DEET composites prepared using interfacial polymerization , 2014 .

[5]  Z. Czech,et al.  Peel adhesion of acrylic pressure-sensitive adhesives on selected substrates versus their surface energies , 2014 .

[6]  Mikkel Jørgensen,et al.  Comparison of UV‐Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll‐to‐Roll Encapsulation Methods for Polymer Solar Cells , 2013 .

[7]  K. Kishimoto,et al.  Tack performance of pressure-sensitive adhesive tapes under tensile loading , 2013 .

[8]  H. Ichiura,et al.  Direct preparation of gelatin microcapsules on paper surface using simple coacervation technique , 2013 .

[9]  H. Ichiura,et al.  Interfacial Polymerization of Functional Paper: Morphology of the Nylon Film Prepared on Paper Surfaces , 2013 .

[10]  Mengling Li,et al.  A review on mechanical properties of pressure sensitive adhesives , 2013 .

[11]  H. Ichiura,et al.  Low methoxylated pectin for preparation of an intelligent functional sheet with responsiveness to sodium ions , 2013 .

[12]  A. Kowalczyk,et al.  Influence of iron carbide filler in carbon matrix on the adhesive properties of acrylic pressure-sensitive adhesives , 2013 .

[13]  H. Ichiura,et al.  Interfacial polymerization preparation of functional paper coated with polyamide film containing volatile essential oil , 2012 .

[14]  H. Ichiura,et al.  Functional geraniol-Ca(OH)2 composite/sodium acetate alginate film on nonwoven polyethylene sheet: acetic acid gas production in response to acid , 2010 .

[15]  Alírio E. Rodrigues,et al.  Scentfashion®: Microencapsulated perfumes for textile application , 2009 .

[16]  H. Ichiura,et al.  Alginate film prepared on polyethylene nonwoven sheet and its function for ellagic acid release in response to sodium ions , 2009 .

[17]  Alírio E. Rodrigues,et al.  Microencapsulation of Limonene for Textile Application , 2008 .

[18]  H. Yokota,et al.  Paper–paraffin composites prepared by interfacial polymerisation reaction on paper surface and its function of thermal energy storage , 2008 .

[19]  H. Ichiura,et al.  Preparation of smart paper part I—formation of nylon microcapsules on paper surface using interfacial polymerization , 2006 .

[20]  Y. Imai,et al.  Adsorption and desorption behaviors of flavor molecules into a microporous pillared clay mineral and the application to flavor capsule composites , 2006 .

[21]  H. Ichiura,et al.  Preparation of microcapsules that produce color in response to humidity for use in intelligent functional paper , 2005 .