论文信息 - Implementation and performance of the Detector Control System for the electromagnetic calorimeter of the CMS experiment

Implementation and performance of the Detector Control System for the electromagnetic calorimeter of the CMS experiment

In this presentation we describe the main design objectives, the detailed specifications and the final layout of the Detector Control System (DCS) for the electromagnetic calorimeter (ECAL) of the CMS experiment. Emphasis is put on the system implementation and specific hardware and software solutions in each of its sub-systems. The latest results from the tests of final prototypes of these subsystems during the 2006 ECAL test-beam programme, as well as the installation and commissioning of the whole DCS at the CMS experimental construction site are discussed.

[1] B. Hallgren,et al. The Embedded Local Monitor Board (ELMB) in the LHC Front-end I/O Control System , 2001 .

[2] A. Bartoloni. The Power Supply System for CMS-ECAL APDs , 2001 .

[3] D. Renker,et al. Radiation hard avalanche photodiodes for the CMS detector , 2005 .

[4] C. J. Oskamp,et al. ALICE Electromagnetic Calorimeter Technical Design Report , 2008 .

[5] M.Beharrell,et al. Technology Integration in the LHC EXperiments Joint Controls Project , 2001 .

[6] Adi Bornheim,et al. Performance of the monitoring light source for the CMS lead tungstate crystal calorimeter , 2004, IEEE Transactions on Nuclear Science.

[7] G. Dissertori,et al. Performance of the CMS ECAL safety system for Super Modules SM0 and SM1 , 2005 .

[8] M. Korzhik,et al. Lead tungstate scintillation material , 2002 .