Design optimisation of reluctance synchronous machines: a motor and generator study
暂无分享,去创建一个
[1] Herman Van der Auweraer,et al. Study of torque ripple and noise for different rotor topologies of a synchronous reluctance machine , 2015, 2015 9th International Symposium on Advanced Topics in Electrical Engineering (ATEE).
[2] Fernando J. T. E. Ferreira,et al. Technical and Economical Considerations on Super High-Efficiency Three-Phase Motors , 2012, IEEE Transactions on Industry Applications.
[3] F. Cupertino,et al. FEA-based multi-objective optimization of IPM motor design including rotor losses , 2010, 2010 IEEE Energy Conversion Congress and Exposition.
[4] S.E. Sibande,et al. Optimal design of a PM-assisted rotor of a 110 kW reluctance synchronous machine , 2004, 2004 IEEE Africon. 7th Africon Conference in Africa (IEEE Cat. No.04CH37590).
[5] Maarten J. Kamper,et al. Weighted factor multi-objective design optimisation of a reluctance synchronous machine , 2015, IEMDC 2015.
[6] Robert D. Lorenz,et al. Efficiency contours and loss minimization over a driving cycle of a variable-flux flux-intensifying interior permanent magnet machine , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[7] Valéria Hrabovcová,et al. Design of Rotating Electrical Machines , 2009 .
[8] M. J. Kamper,et al. Saliency performance investigation of synchronous machines for position sensorless controlled EV drives , 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).
[9] Chas.P. Steinmetz,et al. On the law of hysteresis , 1984, Proceedings of the IEEE.
[10] Robert D. Lorenz,et al. Novel design of flux-intensifying interior permanent magnet synchronous machine suitable for power conversion and self-sensing control at very low speed , 2010, 2010 IEEE Energy Conversion Congress and Exposition.
[11] Thomas A. Lipo,et al. Synchronous reluctance machines―a viable alternative for AC drives? , 1991 .
[12] Maarten J. Kamper,et al. Effect of stator chording and rotor skewing on performance of reluctance synchronous machine , 2002 .
[13] Alfredo Vagati,et al. The synchronous reluctance solution: a new alternative in AC drives , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.
[14] Michael N. Vrahatis,et al. Particle Swarm Optimization Method for Constrained Optimization Problems , 2002 .
[15] Jung Ho Lee,et al. Rotor Design on Torque Ripple Reduction for a Synchronous Reluctance Motor With Concentrated Winding Using Response Surface Methodology , 2006, IEEE Transactions on Magnetics.
[16] Ronghai Qu,et al. Magnetization and performance analysis of a variable-flux flux-intensifying interior permanent magnet machine , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).
[17] Toomas Vaimann,et al. Design of permanent magnet assisted synchronous reluctance machine , 2014, Proceedings of the 2014 15th International Scientific Conference on Electric Power Engineering (EPE).
[18] S. Williamson,et al. Direct finite element design optimisation of the cageless reluctance synchronous machine , 1996 .
[19] Maarten J. Kamper,et al. Flux barrier and skew design optimisation of reluctance synchronous machines , 2014, 2014 International Conference on Electrical Machines (ICEM).
[20] Sonja Lundmark,et al. A synchronous reluctance generator for a wind application-compared with an interior mounted permanent magnet synchronous generator , 2014 .
[21] C. Sadarangani,et al. Novel rotor design optimization of Synchronous Reluctance Machine for low torque ripple , 2012, 2012 XXth International Conference on Electrical Machines.
[22] Michiel Hendrik Albertus Prins. Design of a field-intensified interior permanent magnet synchronous machine for electric vehicle application , 2014 .
[23] Maurizio Repetto,et al. Design refinement of synchronous reluctance motors through finite-element analysis , 2000 .
[24] Alfredo Vagati,et al. Design criteria of high performance synchronous reluctance motors , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.
[25] K. Akatsu,et al. Design and evaluation of a variable-flux flux-intensifying interior permanent magnet machine , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).
[26] D. Miljavec. Torque ripple in synchronous reluctance motor , 1998, MELECON '98. 9th Mediterranean Electrotechnical Conference. Proceedings (Cat. No.98CH36056).
[27] Gianmario Pellegrino,et al. Automatic Design of Synchronous Reluctance Motors Focusing on Barrier Shape Optimization , 2015, IEEE Transactions on Industry Applications.
[28] M. Sanada,et al. Torque ripple improvement for synchronous reluctance motor using an asymmetric flux barrier arrangement , 2004, IEEE Transactions on Industry Applications.
[29] L. Frantzis,et al. Offshore Wind Market and Economic Analysis , 2013 .
[30] G. Kimura,et al. A study on torque ripple reduction of synchronous reluctance motor , 2001, 4th IEEE International Conference on Power Electronics and Drive Systems. IEEE PEDS 2001 - Indonesia. Proceedings (Cat. No.01TH8594).
[31] N. Bianchi,et al. Performance analysis of an IPM motor with segmented rotor for flux-weakening applications , 1999, IEMDC 1999.
[32] J. Wang,et al. Design optimisation of permanent magnet assisted synchronous reluctance machines for electric vehicle applications , 2012, 2012 XXth International Conference on Electrical Machines.
[33] Dan M. Ionel,et al. Establishing the Relative Merits of Synchronous Reluctance and PM-Assisted Technology Through Systematic Design Optimization , 2015, IEEE Transactions on Industry Applications.
[34] M. J. Kamper,et al. Design and performance of compensated reluctance synchronous machine drive with extended constant power speed range , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).
[35] Sai Sudheer Reddy Bonthu,et al. Design procedure for multi-phase external rotor permanent magnet assisted synchronous reluctance machines , 2016, 2016 IEEE Applied Power Electronics Conference and Exposition (APEC).
[36] Frede Blaabjerg,et al. Active-flux based motion sensorless vector control of biaxial excitation generator/motor for automobiles (BEGA) , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[37] Jos Unpingco,et al. Python for Probability, Statistics, and Machine Learning , 2016 .
[38] M. Reinlein,et al. Torque ripple minimization of reluctance synchronous machines by continuous and discrete rotor skewing , 2015, 2015 5th International Electric Drives Production Conference (EDPC).
[39] Freddy Magnussen,et al. Novel rotor design optimization of synchronous reluctance machine for high torque density , 2012 .
[40] Frede Blaabjerg,et al. BEGA Starter/Alternator—Vector Control Implementation and Performance for Wide Speed Range at Unity Power Factor Operation , 2010, IEEE Transactions on Industry Applications.
[41] Peter Sergeant,et al. Synchronous Reluctance Motor Performance Based on Different Electrical Steel Grades , 2015, IEEE Transactions on Magnetics.
[42] Nicola Bianchi,et al. Multi-objective optimization of a PM Assisted Synchronous Reluctance Machine, including torque and sensorless detection capability , 2012 .
[43] Sai Sudheer Reddy Bonthu,et al. Optimal design of five-phase permanent magnet assisted synchronous reluctance motor for low output torque ripple , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).
[44] Fernando J. T. E. Ferreira,et al. Beyond Induction Motors—Technology Trends to Move Up Efficiency , 2013, IEEE Transactions on Industry Applications.
[45] Xiaoyong Zhu,et al. Design and evaluation of a new flux-intensifying permanent magnet brushless motor , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).
[46] Stiaan Gerber. A finite element based optimisation tool for electrical machines , 2011 .
[47] Y. Honda,et al. High performance synchronous reluctance motor with multi-flux barrier for the appliance industry , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).
[48] N. Bianchi,et al. Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and PM-Assisted Synchronous Reluctance Motors , 2009, IEEE Transactions on Industry Applications.
[49] Lauri Perkkio,et al. Evaluation and comparison of different numerical computation methods for the electromagnetic torque in electrical machines , 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).
[50] Nicola Bianchi,et al. Sensitivity analysis of torque ripple reduction of synchronous reluctance and interior PM motors , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[51] Gianmario Pellegrino,et al. Design of synchronous reluctance machines with multi-objective optimization algorithms , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[52] D. D. Reigosa,et al. Novel Design of Flux-Intensifying Interior Permanent Magnet Synchronous Machine Suitable for Self-Sensing Control at Very Low Speed and Power Conversion , 2011, IEEE Transactions on Industry Applications.
[53] Jian-Xin Shen,et al. Evaluation of low-cost high-performance synchronous motors for ventilation application , 2015, 2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART).
[54] Barrie Mecrow,et al. Higher pole number synchronous reluctance machines with fractional slot concentrated windings , 2014 .
[55] Marco Ferrari,et al. Design of Synchronous Reluctance Motor for Hybrid Electric Vehicles , 2015, IEEE Transactions on Industry Applications.
[56] F. Blaabjerg,et al. BEGA-a biaxial excitation Generator for automobiles: comprehensive characterization and test results , 2005, IEEE Transactions on Industry Applications.
[57] Joaquim R. R. A. Martins,et al. Structural and Multidisciplinary Optimization Manuscript No. Pyopt: a Python-based Object-oriented Framework for Nonlinear Constrained Optimization , 2022 .
[58] N. Bianchi,et al. Permanent magnet volume minimization in permanent magnet assisted synchronous reluctance motors , 2013, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER).
[59] Pragasen Pillay,et al. A Novel Grain-Oriented Lamination Rotor Core Assembly for a Synchronous Reluctance Traction Motor With a Reduced Torque Ripple Algorithm , 2016, IEEE Transactions on Industry Applications.
[60] Maarten J Kamper,et al. Design optimisation of cageless flux barrier rotor reluctance synchronous machine , 1996 .
[61] Shigeru Okuma,et al. A new flux-barrier-type reluctance motor with a slit rotor , 1999, IEEE Trans. Ind. Electron..
[62] N. Bianchi,et al. Optimization of IPM motors with Machaon rotor flux barriers , 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.
[63] K. Schittkowski,et al. NONLINEAR PROGRAMMING , 2022 .
[64] Yi Du,et al. Electromagnetic Performance Analysis and Verification of a New Flux-Intensifying Permanent Magnet Brushless Motor With Two-Layer Segmented Permanent Magnets , 2016, IEEE Transactions on Magnetics.
[65] Thomas M. Jahns,et al. A saturating lumped-parameter model for an interior PM synchronous machine , 2002 .
[66] C. Sadarangani,et al. New theoretical approach to the synchronous reluctance machine behavior and performance , 2008, 2008 18th International Conference on Electrical Machines.
[67] Robert D. Lorenz,et al. Design methodology for variable-flux, flux-intensifying interior permanent magnet machines for an electric-vehicle-class inverter rating , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[68] Jan A Snyman,et al. Practical Mathematical Optimization: An Introduction to Basic Optimization Theory and Classical and New Gradient-Based Algorithms , 2005 .
[69] R. Marler,et al. The weighted sum method for multi-objective optimization: new insights , 2010 .
[70] A. Fratta,et al. Evaluation of torque ripple in high performance synchronous reluctance machines , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.
[71] N. Bianchi,et al. An Analytical Approach to Design the PM in PMAREL Motors Robust Toward the Demagnetization , 2016, IEEE Transactions on Energy Conversion.
[72] Thomas A. Lipo,et al. Rotor design optimization of synchronous reluctance machine , 1994 .
[73] Gianmario Pellegrino,et al. Effect of the numbers of slots and barriers on the optimal design of synchronous reluctance machines , 2014, 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).
[74] Jiabin Wang,et al. Design optimisation and performance evaluation of a rare-earth-free Permanent Magnet Assisted Synchronous Reluctance Machine for electric vehicle traction , 2014 .
[75] Jung-Ho Lee,et al. Rotor optimum design on Torque Ripple Reduction for a Synchronous Reluctance Motor with Concentrated Winding using RSM , 2007, 2007 IEEE International Electric Machines & Drives Conference.
[76] Ronghai Qu,et al. Rotor design considerations for a variable-flux flux-intensifying interior permanent magnet machine with improved torque quality and reduced magnetization current , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).
[77] Maurizio Repetto,et al. Improvement of synchronous reluctance motor design through finite-element analysis , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).
[78] Johannes H. J. Potgieter. Optimal topology and critical evaluation of slip synchronous permanent magnet wind generator , 2014 .
[79] Marco Ferrari,et al. Experimental Comparison of PM-Assisted Synchronous Reluctance Motors , 2014, IEEE Transactions on Industry Applications.
[80] Maarten J. Kamper,et al. Asymmetric Flux Barrier and Skew Design Optimization of Reluctance Synchronous Machines , 2015, IEEE Transactions on Industry Applications.
[81] Fengge Zhang,et al. Simulation and Experimental Analysis of a Brushless Electrically Excited Synchronous Machine With a Hybrid Rotor , 2015, IEEE Transactions on Magnetics.
[82] M. Villani,et al. Magnetic analysis of flux barriers Synchronous Reluctance Motors , 2008, 2008 18th International Conference on Electrical Machines.
[83] Ren-Jye Yang,et al. Optimal topology design using linear programming , 1994 .
[84] Gianmario Pellegrino,et al. Design of Ferrite-Assisted Synchronous Reluctance Machines Robust Toward Demagnetization , 2014, IEEE Transactions on Industry Applications.
[85] Rik W. De Doncker,et al. Torque ripple reduction in Reluctance Synchronous Machines using an asymmetric rotor structure , 2014 .
[86] Huang Shaogang,et al. Analysis of biaxial excitation generator/motor for automobiles using tooth flux method , 2011, 2011 International Conference on Electrical Machines and Systems.
[87] M. Obata,et al. Performance of PMASynRM With Ferrite Magnets for EV/HEV Applications Considering Productivity , 2014, IEEE Transactions on Industry Applications.
[88] Frede Blaabjerg,et al. BEGA Starter/Alternator—Vector Control Implementation and Performance for Wide Speed Range at Unity Power Factor Operation , 2010 .
[89] C. Gerada,et al. Barriers shapes and minimum set of rotor parameters in the automated design of Synchronous Reluctance machines , 2013, 2013 International Electric Machines & Drives Conference.
[90] Jasbir S. Arora,et al. Jan A. Snyman, Practical Mathematical Optimization: An introduction to basic optimization theory and classical and new gradient-based algorithms , 2006 .
[91] J. K. Kostko. Polyphase reaction synchronous motors , 1923, Journal of the American Institute of Electrical Engineers.
[92] Christiaan Willem Vorster. Design of a reluctance synchronous machine for an electric vehicle with a multi speed gearbox , 2014 .
[93] Marco Ferrari,et al. Rotor saturation impact in synchronous reluctance and PM assisted reluctance motors , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[94] W. C. Andrews,et al. The American Institute of Electrical Engineers , 1923, Nature.
[95] Reza Rajabi Moghaddam,et al. Synchronous Reluctance Machine (SynRM) in Variable Speed Drives (VSD) Applications , 2011 .