Acceleration of steel corrosion in concrete by cyclic wetting and drying: effect of drying duration and concrete quality

[1]  Andrew Curry,et al.  ßΣΤΛ testing. , 2021, Diabetes forecast.

[2]  Ueli M. Angst,et al.  Challenges and opportunities in corrosion of steel in concrete , 2018, Materials and Structures.

[3]  Hylton Macdonald,et al.  Marine Concrete Structures – Design, Durability and Performance, Mark Alexander (Ed.) , 2017 .

[4]  M. Tan,et al.  Chloride ingress in cracked and uncracked SHCC under cyclic wetting-drying exposure , 2016 .

[5]  Hailong Ye,et al.  Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation , 2016 .

[6]  Jin Wu,et al.  Transport model of chloride ions in concrete under loads and drying-wetting cycles , 2016 .

[7]  M. Alexander,et al.  Chloride conductivity testing of concrete - past and recent developments , 2015 .

[8]  Hans Beushausen,et al.  Principles of the performance-based approach for concrete durability , 2015 .

[9]  Nick R. Buenfeld,et al.  Influence of drying-induced microcracking and related size effects on mass transport properties of concrete , 2015 .

[10]  Hans Beushausen,et al.  Effect of chemical composition of slag on chloride penetration resistance of concrete , 2014 .

[11]  Sen Li,et al.  On Comparison between Reinforcement Electricity Accelerated Corrosion and Natural Corrosion of Concrete , 2013 .

[12]  Mark Alexander,et al.  A step towards standardising accelerated corrosion tests on laboratory reinforced concrete specimens , 2012 .

[13]  B. Pradhan,et al.  Rebar corrosion in chloride environment , 2011 .

[14]  Hans Beushausen,et al.  Corrosion in cracked and uncracked concrete – influence of crack width, concrete quality and crack reopening , 2010 .

[15]  A. Castel,et al.  Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process , 2010 .

[16]  Arnaud Castel,et al.  The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment , 2009 .

[17]  Yingshu Yuan,et al.  Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate , 2009 .

[18]  Arnaud Castel,et al.  Serviceability Limit State criteria based on steel–concrete bond loss for corroded reinforced concrete in chloride environment , 2009 .

[19]  Quang Thanh Nguyen,et al.  Mechanical Properties of the Rust Layer Induced by Impressed Current Method in Reinforced Mortar , 2008 .

[20]  J. Sharp,et al.  The influence of water removal techniques on the composition and microstructure of hardened cement pastes , 2008 .

[21]  Y. Ballim,et al.  A framework for use of durability indexes in performance-based design and specifications for reinforced concrete structures , 2008 .

[22]  Marton Marosszeky,et al.  Polarisation behaviour of steel bar samples in concrete in seawater. Part 1: Experimental measurement of polarisation curves of steel in concrete , 2008 .

[23]  Sabine Caré,et al.  Influence of Impressed Current on the Initiation of Damage in Reinforced Mortar Due to Corrosion of Embedded Steel , 2007 .

[24]  Arnaud Castel,et al.  Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment , 2007 .

[25]  Mark Alexander,et al.  The influence of binder type, cracking and cover on corrosion rates of steel in chloride-contaminated concrete , 2007 .

[26]  Vicente Feliu,et al.  Corrosion estimates from the transient response to a potential step , 2007 .

[27]  Andrés A. Torres-Acosta,et al.  Residual flexure capacity of corroded reinforced concrete beams , 2007 .

[28]  Surendra P. Shah,et al.  Comparison of Two Accelerated Corrosion Techniques for Concrete Structures , 2007 .

[29]  Khaled Soudki,et al.  A model for prediction of time from corrosion initiation to corrosion cracking , 2007 .

[30]  Khaled Soudki,et al.  Effect of Fiber-Reinforced Polymer Wraps on Corrosion Activity and Concrete Cracking in Chloride-Contaminated Concrete Cylinders , 2006 .

[31]  T. Topper,et al.  Postrepair Fatigue Performance of FRP-Repaired Corroded RC Beams: Experimental and Analytical Investigation , 2005 .

[32]  K. Soudki,et al.  Control of Corrosion-Induced Damage in Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Laminates , 2005 .

[33]  J. M. Miranda,et al.  Considerations on reproducibility of potential and corrosion rate measurements in reinforced concrete , 2004 .

[34]  Andrés A. Torres-Acosta,et al.  Influence of Corrosion on the Structural Stiffness of Reinforced Concrete Beams , 2004 .

[35]  Nobuaki Otsuki,et al.  CORROSION OF STEEL BARS IN CRACKED CONCRETE UNDER MARINE ENVIRONMENT , 2003 .

[36]  Y. Ballim,et al.  Reinforcement corrosion and the deflection of RC beams––an experimental critique of current test methods , 2003 .

[37]  Young Soo Yoon,et al.  PREDICTING THE REMAINING SERVICE LIFE OF LAND CONCRETE BY STEEL CORROSION , 2003 .

[38]  Thierry Vidal,et al.  Influence of steel–concrete interface quality on reinforcement corrosion induced by chlorides , 2003 .

[39]  Khaled Soudki,et al.  Effectiveness of Impressed Current Technique to Simulate Corrosion of Steel Reinforcement in Concrete , 2003 .

[40]  Rob B. Polder,et al.  CHARACTERISATION OF CHLORIDE TRANSPORT AND REINFORCEMENT CORROSION IN CONCRETE UNDER CYCLIC WETTING AND DRYING BY ELECTRICAL RESISTIVITY , 2002 .

[41]  Y. Ballim,et al.  Deflection of RC beams under simultaneous load and steel corrosion , 2001 .

[42]  W. Jason Weiss,et al.  Interaction between Loading, Corrosion, and Serviceability of Reinforced Concrete , 2000 .

[43]  R. A. Buchanan,et al.  Fundamentals of Electrochemical Corrosion , 2000 .

[44]  Nick R. Buenfeld,et al.  The use of small electrochemical perturbations to assess the corrosion of steel in concrete , 1998 .

[45]  Raoul François,et al.  INFLUENCE OF SERVICE CRACKING ON REINFORCEMENT STEEL CORROSION , 1998 .

[46]  G. T. Burstein.  The iron oxides: Structure, properties, reactions, occurrence and uses , 1997 .

[47]  J. Broomfield.  Corrosion of Steel in Concrete: Understanding, investigation and repair , 1996 .

[48]  Carmen Andrade,et al.  Corrosion rate monitoring in the laboratory and on-site , 1996 .

[49]  Mark Alexander,et al.  A chloride conduction test for concrete , 1995 .

[50]  Gareth K. Glass,et al.  An assessment of the coulostatic method applied to the corrosion of steel in concrete , 1995 .

[51]  Cruz Alonso,et al.  Cover cracking as a function of bar corrosion: Part I-Experimental test , 1993 .

[52]  L. J. Parrott,et al.  Moisture profiles in drying concrete , 1988 .

[53]  R. Hooton.  Using Long-Term Outdoor Exposure Data to Benchmark Accelerated Durability Test Methods , 2019 .

[54]  Mark Alexander,et al.  Guiding principles in developing the South African approach to durability index testing of concrete , 2019 .

[55]  Antje Strauss,et al.  Corrosion Of Steel In Concrete Understanding Investigation And Repair , 2016 .

[56]  M. Alexander,et al.  Chloride-induced corrosion of steel in cracked concrete—Part II: Corrosion rate prediction models , 2016 .

[57]  Hans Beushausen,et al.  Chloride-induced corrosion of steel in cracked concrete – Part I: Experimental studies under accelerated and natural marine environments , 2016 .

[58]  Hans Beushausen,et al.  Performance-Based Specifications and Control of Concrete Durability , 2016 .

[59]  M. Tsamados,et al.  INFLUENCE OF , 2014 .

[60]  Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments , 2014 .

[61]  Mike Benjamin Otieno,et al.  The development of empirical chloride-induced corrosion rate prediction models for cracked and uncracked steel reinforced concrete structures in the marine tidal zone , 2014 .

[62]  Goitseone Malumbela,et al.  Measurable parameters for performance of correded and repaired RC beams under load , 2010 .

[63]  Yingang Du,et al.  Structural performance of corrosion-damaged concrete beams , 2008 .

[64]  Simon A. Austin,et al.  Electrochemical Behavior of Steel-Reinforced Concrete During Accelerated Corrosion Testing , 2004 .

[65]  Michael D.A. Thomas,et al.  The use of bulk diffusion tests to establish time-dependent concrete chloride diffusion coefficients , 2003 .

[66]  M. S. Elgarf,et al.  Flexural Strength of Concrete Beams with Corroding Reinforcement , 1999 .

[67]  J. G. Cabrera,et al.  Deterioration of concrete due to reinforcement steel corrosion , 1996 .

[68]  C. L. Page,et al.  An investigation of galvanostatic transient methods used to monitor the corrosion rate of steel in concrete , 1993 .