Design Optimization of a Controllable Camber Rotor Airfoil

A conformable airfoil is proposed as an alternative to trailing-edge flaps used for active helicopter vibration reduction through high-frequency changes in camber. The design consists of several compliant mechanisms of predetermined topology that are placed serially within the airfoil along the chord, aft of the leading-edge spar. A shape optimization approach is used to design the compliant mechanisms, in which the objective is to maximize trailing-edge deflection while minimizing airfoil deflections due to aerodynamic loads. Solutions were obtained using a sequential linear programming method coupled with a finite element analysis. An optimized shape is predicted to achieve a trailing-edge deflection of ±6.0 mm or a ±4.6- deg equivalent flap deflection angle using the tip deflection objective. Results indicate that the deflection is dependent on the amount of passive material allowed and the objective function used. The aerodynamic loads are found to cause only small deformations in comparison with those caused by the actuation. Prototype fabrication and bench-top tests demonstrated that rotor airfoil camber is controllable using the proposed concept.

[1]  Raymond C. Montgomery,et al.  Flight Control Using Distributed Shape-Change Effector Arrays , 2000 .

[2]  Dimitris C. Lagoudas,et al.  Development of a Shape-Memory-Alloy Actuated Biomimetic Hydrofoil , 2002 .

[3]  Sridhar Kota,et al.  Static Shape Control of Smart Structures Using Compliant Mechanisms , 1999 .

[4]  M. Drela.  XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils , 1989 .

[5]  Robert A. Ormiston,et al.  Hover Testing of a Small-Scale Rotor with On-Blade Elevons , 2001 .

[6]  Ron Barrett,et al.  WIND TUNNEL TESTING OF A HIGH AUTHORITY AIRSPEED INSENSITIVE ROTOR BLADE FLAP , 1999 .

[7]  Peretz P. Friedmann,et al.  Application of a New Compressible Time Domain Aerodynamic Model to Vibration Reduction in Helicopters Using an Actively Controlled Flap , 2001 .

[8]  Mary Frecker,et al.  Design of a Comfortable Rotor Airfoil Using Distributed Piezoelectric Actuators , 2005 .

[9]  David B. Domzalski,et al.  Development of a piezoelectric actuator for trailing edge flap control of full scale rotor blades , 2001 .

[10]  J. Katz,et al.  Low-Speed Aerodynamics , 1991 .

[11]  Friedrich K. Straub,et al.  Rotors with Trailing Edge Flaps: Analysis and Comparison with Experimental Data , 1998 .

[12]  Sridhar Kota,et al.  An Energy Formulation for Parametric Size and Shape Optimization of Compliant Mechanisms , 1999 .

[13]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[14]  Inderjit Chopra,et al.  Design Issues of a High-Stroke, On-Blade Piezostack Actuator for a Helicopter Rotor with Trailing-Edge Flaps , 2000 .

[15]  Inderjit Chopra,et al.  Wind Tunnel Testing of a Smart Rotor Model with Trailing-Edge Flaps , 2002 .

[16]  Aditi Chattopadhyay,et al.  Design of a smart flap using polymeric C-block actuators and a hybrid optimization technique , 1997 .

[17]  G. K. Ananthasuresh,et al.  Freeform Skeletal Shape Optimization of Compliant Mechanisms , 2001, Adaptive Structures and Material Systems.

[18]  Inderjit Chopra,et al.  Hover Testing of Active Rotor Blade-Tips Using a Piezo-Induced Bending-Torsion Coupled Beam , 1998 .

[19]  Friedrich K. Straub,et al.  Design and testing of a double X-frame piezoelectric actuator , 2000, Smart Structures.