Free radical bulk polymerization in cylindrical molds

Bulk styrene homopolymerization in cylindrical molds was studied in order to simulate the reactive injection process when the reaction kinetics was much slower than the filling process. Mathematical models were built and implemented, allowing the analysis of certain kinetic phenomena, such as the gel-effect, and the relevance of natural convection. Based on a detailed kinetic mechanism, the polymer properties (average molecular weight and polydispersity) and monomer conversion were calculated as functions of spatial coordinates and time. The results obtained show that polymer properties and monomer conversion may be very heterogeneous inside the cylindrical mold, although insensitive to variations of the diffusion coefficient, so that defects are expected to appear as a consequence of the heterogeneity of polymer properties inside the mold. Experiments confirmed the simulation results. Simulations indicate that heterogeneities may be expected to increase when the reaction rates are one order of magnitude higher, as in acrylic acid polymerizations.

[1]  K. S. Knaebel,et al.  Pressure swing adsorption: Development of an equilibrium theory for binary gas mixtures with nonlinear isotherms , 1989 .

[2]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[3]  Gerry E. Schneider,et al.  A MODIFIED STRONGLY IMPLICIT PROCEDURE FOR THE NUMERICAL SOLUTION OF FIELD PROBLEMS , 1981 .

[4]  W. Harmon Ray,et al.  On the Mathematical Modeling of Polymerization Reactors , 1972 .

[5]  H. A. Lord,et al.  Mold‐filling studies for the injection molding of thermoplastic materials. Part II: The transient flow of plastic materials in the cavities of injection‐molding dies , 1975 .

[6]  R. G. Parrott,et al.  Numerical simulation of injection mold filling , 1970 .

[7]  A. Corripio,et al.  Transient temperature model for reaction injection molding , 1995 .

[8]  Christopher W. Macosko,et al.  Heat transfer and curing in polymer reaction molding , 1976 .

[9]  J. Pinto,et al.  On the preparation of acrylic acid/vinyl acetate copolymers with constant composition: 4. Modelling batch and continuous free-radical AA/VA copolymerization , 1997 .

[10]  A. Hui,et al.  Thermal polymerization of styrene at high conversions and temperatures. An experimental study , 1972 .

[11]  M. Kamal.  Computer simulation and control for product quality in injection molding , 1996 .

[12]  Costas G. Gogos,et al.  A numerical simulation of the cavity filling process with PVC in injection molding , 1973 .

[13]  W. Michaeli,et al.  Engineering analysis and design of twin‐screw extruders for reactive extrusion , 1995 .

[14]  D. Reible,et al.  Three-Dimensional Modeling of Reaction Injection Molding. , 1994 .

[15]  H. H. Dannelongue,et al.  Numerical simulation of mold filling in reaction injection molding , 1991 .

[16]  S. F. Shen,et al.  A finite-element/finite-difference simulation of the injection-molding filling process , 1980 .

[17]  C. C. Chen,et al.  A Continuous Bulk Polymerization Process for Crystal Polystyrene , 1994 .