An Innovative Approach for Gob-Side Entry Retaining in Thick Coal Seam Longwall Mining

Gob-side entry retaining (GER) is a popular non-pillar mining technique regarding how to reserve a gateroad for the use of next panel mining. When used in thick coal seams, the conventional entry retaining method requires a huge amount of filling materials and may cause entry (gateroad) accidents. Thus, an innovative non-pillar longwall mining approach is introduced. First, structural and mechanical models were built to explore the mechanism of the new approach. The modeling results indicate that effective bulking of the gob roof and reasonable support of the entry roof were key governing factors in improving entry stabilities and reducing roof deformations. Accordingly, a directional roof fracturing technique was proposed to contribute to gob roof caving, and a constant resistance and large deformation anchor (CRLDA) cable was used to stabilize the entry roof. Subsequently, the evolutionary laws of the roof structure and stresses were explored using numerical simulation. It was found that the structure of the surrounding rocks around the retained entry changed significantly after roof fracturing. The stress-bearing center was transferred to the gob area, and the entry roof was in a low stress environment after adopting the approach. Finally, the approach was tested on a thick coal seam longwall mining panel. Field monitoring indicates that the retained entry was in a stable state and the index of the retained entry met the requirement of the next mining panel. This work provides an effective and economical approach to non-pillar longwall mining in thick coal seams.

[1]  Hongpu Kang,et al.  Deformation characteristics and reinforcement technology for entry subjected to mining-induced stresses , 2011 .

[2]  Guo Wenbing.  EXPERIMENT STUDY OF COMPACTION CHARACTERISTICS OF CRUSHED STONES FROM COAL SEAM ROOF , 2012 .

[3]  Manchao He,et al.  Development of a novel energy-absorbing bolt with extraordinarily large elongation and constant resistance , 2014 .

[4]  Xu Ying,et al.  Control mechanism and technique of floor heave with reinforcing solid coal side and floor corner in gob-side coal entry retaining , 2012 .

[5]  Debasis Deb,et al.  Numerical analysis of a longwall mining cycle and development of a composite longwall index , 2016 .

[6]  Xiangyu Wang,et al.  Numerical investigation of coal pillar failure under simultaneous static and dynamic loading , 2016 .

[7]  Robert C. Milici,et al.  Coal resources, reserves and peak coal production in the United States , 2013 .

[8]  Harold Malcolm Westergaard.  Theory of Elasticity and Plasticity , 1952 .

[9]  Xiexing Miao,et al.  Gateside packwall design in solid backfill mining – A case study , 2016 .

[10]  V. Palchik,et al.  Bulking factors and extents of caved zones in weathered overburden of shallow abandoned underground workings , 2015 .

[11]  He Man-cha.  Mechanics characteristics and applications of prevention and control rock bursts of the negative poisson's ratio effect anchor , 2014 .

[12]  Jinhai Xu,et al.  Stability study on naturally filling body in gob-side entry retaining , 2012 .

[13]  H. Yavuz,et al.  An estimation method for cover pressure re-establishment distance and pressure distribution in the goaf of longwall coal mines , 2004 .

[14]  Hongyun Yang,et al.  Soft Roof Failure Mechanism and Supporting Method for Gob-Side Entry Retaining , 2015 .

[15]  Shuai Wang,et al.  Adaptation assessment of gob-side entry retaining based on geological factors , 2016 .

[16]  Alex M. Lechner,et al.  Spatial assessment of open cut coal mining progressive rehabilitation to support the monitoring of rehabilitation liabilities , 2016 .

[17]  Yunliang Tan,et al.  Design and construction of entry retaining wall along a gob side under hard roof stratum , 2015 .

[18]  Li Chen,et al.  Support principles of NPR bolts/cables and control techniques of large deformation , 2016 .

[19]  John P. Carter,et al.  Vertical stress changes in multi-seam mining under supercritical longwall panels , 2013 .

[20]  Hua Xinzhu,et al.  Development status and improved proposals on gob-side entry retaining support technology in China , 2006 .

[21]  Nong Zhang,et al.  Stability and deformation of surrounding rock in pillarless gob-side entry retaining , 2012 .

[22]  Zhibiao Guo,et al.  Longwall mining “cutting cantilever beam theory” and 110 mining method in China—The third mining science innovation , 2015 .

[23]  Yong Fu,et al.  Analysis and application in controlling surrounding rock of support reinforced roadway in gob-side entry with fully mechanized mining , 2010 .

[24]  Abbas Majdi,et al.  Development of a time-dependent energy model to calculate the mining-induced stress over gates and pillars , 2015 .

[25]  Xuehua Li,et al.  Numerical Investigation of the Effect of the Location of Critical Rock Block Fracture on Crack Evolution in a Gob-side Filling Wall , 2016, Rock Mechanics and Rock Engineering.

[26]  Yong Chen,et al.  An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal caving , 2015 .