Three-steps-meshing based multiple crack identification for structures and its experimental studies

Multiple crack identification plays an important role in vibration-based crack identification of structures. Traditional crack detection method of single crack is difficult to be used in multiple crack diagnosis. A three-step-meshing method for the multiple cracks identification in structures is presented. Firstly, the changes in natural frequency of a structure with various crack locations and depth are accurately obtained by means of wavelet finite element method, and then the damage coefficient method is used to determine the number and the region of cracks. Secondly, different regions in the cracked structure are divided into meshes with different scales, and then the small unit containing cracks in the damaged area is gradually located by iterative computation. Lastly, by finding the points of intersection of three frequency contour lines in the small unit, the crack location and depth are identified. In order to verify the effectiveness of the presented method, a multiple cracks identification experiment is carried out. The diagnostic tests on a cantilever beam under two working conditions show the accuracy of the proposed method: with a maximum error of crack location identification 2.7% and of depth identification 5.2%. The method is able to detect multiple crack of beam with less subdivision and higher precision, and can be developed as a multiple crack detection approach for complicated structures.

[1]  Robert Y. Liang,et al.  Quantitative NDE technique for assessing damages in beam structures , 1992 .

[2]  X. D. Wang,et al.  Identification of multiple cracks based on optimization methods using harmonic elastic waves , 2011 .

[3]  Antonino Morassi,et al.  IDENTIFICATION OF A CRACK IN A ROD BASED ON CHANGES IN A PAIR OF NATURAL FREQUENCIES , 2001 .

[4]  Zhou,et al.  Simulation Research on Stress Intensity Factors of Different Crack Aspect Ratios on Hollow Axles , 2009 .

[5]  Andrew D. Dimarogonas,et al.  Vibration of cracked structures: A state of the art review , 1996 .

[6]  Cecilia Surace,et al.  Natural frequencies of a bar with multiple cracks , 2004 .

[7]  Z. R. Lu,et al.  Time domain identification of multiple cracks in a beam , 2010 .

[8]  J. W. Xiang,et al.  Multiple Crack Identification Using Frequency Measurement , 2011 .

[9]  Yongxiang Zhao,et al.  NEW MODEL FOR LONG FATIGUE CRACK GROWTH RATE , 2006 .

[10]  Michael Wünsche,et al.  Numerical Simulation of Multiple Fatigue Crack Growth with Additional Crack Initiation , 2011 .

[11]  S. K. Maiti,et al.  Detection of multiple cracks using frequency measurements , 2003 .

[12]  Robert Y. Liang,et al.  An integrated approach to detection of cracks using vibration characteristics , 1993 .

[13]  O. S. Salawu Detection of structural damage through changes in frequency: a review , 1997 .

[14]  Bing Li,et al.  Detection of crack location and size in structures using wavelet finite element methods , 2005 .

[15]  Li,et al.  I-beam Crack Identification Based on Study of Local Flexibility due to Crack , 2011 .

[16]  Li Feng,et al.  Analytical Approach for Detection of Multiple Cracks in a Beam , 2010 .

[17]  Jinhee Lee,et al.  Identification of multiple cracks in a beam using vibration amplitudes , 2009 .

[18]  Tao Yin,et al.  Statistical detection of multiple cracks on thin plates utilizing dynamic response , 2010 .

[19]  Anjan Dutta,et al.  Damage detection in bridges using accurate modal parameters , 2004 .

[20]  Xuefeng Chen,et al.  MULTIPLE INFANT CRACKS DETECTION FOR BEAM-TYPE STRUCTURES BY WAVELET FINITE ELEMENT METHOD , 2005 .

[21]  A. S. Sekhar,et al.  Crack identification in a rotor system: a model-based approach , 2004 .

[22]  R. Gasch,et al.  A Survey Of The Dynamic Behaviour Of A Simple Rotating Shaft With A Transverse Crack , 1993 .

[23]  Fu-Ping Cheng,et al.  Multiple crack identification of a free-free beam with uniform material property variation and varied noised frequency , 2008 .

[24]  A. S. Sekhar,et al.  Multiple cracks effects and identification , 2008 .

[25]  A. S. Sekhar,et al.  Some Recent Studies on Cracked Rotors , 2011 .