Pressure drop measurements and modeling on SiC foams

Foam-structured beds are likely to be the next generation of catalyst supports due to their interesting specific properties (large exchange area, low pressure drop, easy control of external porosity, etc.). Nevertheless, chemical engineering parameters of this new catalyst support types are still not completely clear for the scientific community and many approaches are attempted to solve this problem. SiC foams offer the dual advantages of the interesting properties of structured beds and the intrinsic thermal and mechanical properties of silicon carbide as a catalytic support. In the present work, the problem of pressure drops along foam beds is studied with a new simplistic geometrical model as a first step in the understanding of the peculiar hydrodynamic behavior of SiC foams in chemical processes. The proposed model was successfully validated by experimental results on a relatively large range of parameters which fully confirm the validity of the model.

[1]  S. Pratsinis,et al.  Ceramic foams directly-coated with flame-made V2O5/TiO2 for synthesis of phthalic anhydride , 2006 .

[2]  G. Groppi,et al.  Mass-Transfer Characterization of Metallic Foams as Supports for Structured Catalysts , 2005 .

[3]  S. Ergun.  Fluid flow through packed columns , 1952 .

[4]  Kambiz Vafai,et al.  Convective and Radiative Heat Transfer in Porous Media , 1989 .

[5]  Enrico Tronconi,et al.  Design of novel monolith catalyst supports for gas/solid reactions with heat exchange , 2000 .

[6]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: pressure drop , 2000 .

[7]  J. M. Zamaro,et al.  Growth of mordenite on monoliths by secondary synthesis: Effects of the substrate on the coating structure and catalytic activity , 2006 .

[8]  J. P. Du Plessis,et al.  Pressure drop modelling in cellular metallic foams , 2002 .

[9]  M. Twigg,et al.  Theory and applications of ceramic foam catalysts , 2002 .

[10]  K. Leong,et al.  Characteristics of oscillating flow through a channel filled with open-cell metal foam , 2006 .

[11]  J. Richardson,et al.  Carbon dioxide reforming with Rh and Pt–Re catalysts dispersed on ceramic foam supports , 2003 .

[12]  C. Pham‐Huu,et al.  Silicon Carbide: A Novel Catalyst Support for Heterogeneous Catalysis , 2001 .

[13]  Ephraim M Sparrow,et al.  Non-Darcy Flow Through Fibrous Porous Media , 1969 .

[14]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: mass and heat transfer , 2003 .

[15]  M. Ledoux,et al.  New synthesis and uses of high-specific-surface SiC as a catalytic support that is chemically inert and has high thermal resistance , 1988 .

[16]  Milorad P. Dudukovic,et al.  A phenomenological model for pressure drop, liquid holdup, and flow regime transition in gas-liquid trickle flow , 1992 .

[17]  T. Lu,et al.  Heat transfer in open-cell metal foams , 1998 .

[18]  P. G. Collishaw,et al.  An assessment of expressions for the apparent thermal conductivity of cellular materials , 1994, Journal of Materials Science.

[19]  C. Pham‐Huu,et al.  Beta zeolite supported on a β-SiC foam monolith: A diffusionless catalyst for fixed-bed Friedel–Crafts reactions , 2006 .

[20]  P. Marchot,et al.  Pd-Ag/SiO2 xerogel catalyst forming by impregnation on alumina foams , 2006 .

[21]  G. Groppi,et al.  Comparison among structured and packed-bed reactors for the catalytic partial oxidation of CH4 at short contact times , 2005 .

[22]  H. J. Veringa,et al.  A catalytic heat-exchanging tubular reactor for combining of high temperature exothermic and endothermic reactions , 2001 .

[23]  Faïçal Larachi,et al.  Pressure Drop and Liquid Holdup in Trickle Flow Reactors: Improved Ergun Constants and Slip Correlations for the Slit Model , 1998 .

[24]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .