Radiometric calibration of infrared imagers using an internal shutter as an equivalent external blackbody

Abstract. Advances in microbolometer long-wave infrared (LWIR) detectors have led to the common use of infrared cameras that operate without active temperature stabilization, but the response of these cameras varies with their own temperature. Therefore, obtaining quantitative data requires a calibration that compensates for these errors. This paper describes a method for stabilizing the camera’s response through software processing of consecutive images of the scene and images of the camera’s internal shutter. An image of the shutter is processed so that it appears as if it were viewed through the lens. The differences between the scene and the image of the shutter treated as an external blackbody are then related to the radiance or temperature of the objects in the scene. This method has been applied to two commercial LWIR cameras over a focal plane array temperature range of ±7.2°C, changing at a rate of up to ±0.5°C/min. During these tests, the rms variability of the camera output was reduced from ±4.0°C to ±0.26°C.

[1]  Jorge E. Pezoa,et al.  On-line nonuniformity and temperature compensation of uncooled IRFPAs using embedded digital hardware , 2013, Optics & Photonics - Optical Engineering + Applications.

[2]  에르네스트 그림버그.  Radiometry using an uncooled microbolometer detector and infra-red camera using thereof , 2004 .

[3]  Peyman Moghadam,et al.  Ad Hoc Radiometric Calibration of a Thermal-Infrared Camera , 2013, 2013 International Conference on Digital Image Computing: Techniques and Applications (DICTA).

[4]  Joseph A. Shaw,et al.  Infrared Cloud Imager Development for Atmospheric Optical Communication Characterization, and Measurements at the JPL Table Mountain Facility , 2013 .

[5]  Yanpeng Cao,et al.  Single-image-based solution for optics temperature-dependent nonuniformity correction in an uncooled long-wave infrared camera. , 2014, Optics letters.

[6]  Joseph A. Shaw,et al.  Errata: Correcting for focal-plane-array temperature dependence in microbolometer infrared cameras lacking thermal stabilization , 2013 .

[7]  Majeed M Hayat,et al.  Scene-based nonuniformity correction for focal plane arrays by the method of the inverse covariance form. , 2003, Applied optics.

[8]  Joseph A. Shaw,et al.  Calibration of uncooled LWIR microbolometer imagers to enable long-term field deployment , 2014, Defense + Security Symposium.

[9]  Rick L. Lawrence,et al.  Comparison of Long-Wave Infrared Imaging and Visible/Near-Infrared Imaging of Vegetation for Detecting Leaking ${\rm CO}_2$ Gas , 2014, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing.

[10]  Yanpeng Cao,et al.  Shutterless solution for simultaneous focal plane array temperature estimation and nonuniformity correction in uncooled long-wave infrared camera. , 2013, Applied optics.

[11]  P. Nugent,et al.  Physics principles in radiometric infrared imaging of clouds in the atmosphere , 2013 .

[12]  Kohei Mizutani,et al.  Radiometric cloud imaging with an uncooled microbolometer thermal infrared camera. , 2005, Optics express.

[13]  Jennifer Johnson,et al.  Long-wave infrared imaging for non-invasive beehive population assessment. , 2011, Optics express.

[14]  Paul W. Kruse,et al.  Uncooled Thermal Imaging Arrays, Systems, and Applications , 2001 .

[15]  Rick L. Lawrence,et al.  Long-wave infrared imaging of vegetation for detecting leaking CO 2 gas , 2012 .

[16]  Joseph A. Shaw,et al.  Correcting for focal-plane-array temperature dependence in microbolometer infrared cameras lacking thermal stabilization , 2013 .

[17]  Sabino Piazzolla,et al.  Infrared cloud imaging in support of Earth-space optical communication. , 2009, Optics express.

[18]  Joseph A. Shaw,et al.  Cloud statistics measured with the infrared cloud imager (ICI) , 2005, IEEE Transactions on Geoscience and Remote Sensing.