Mixed matrix membrane application for olive oil wastewater treatment: process optimization based on Taguchi design method.

Olive oil mill wastewater (OMW) is a concentrated effluent with a high organic load. It has high levels of organic chemical oxygen demand (COD) and phenolic compounds. This study presents a unique process to treat OMW. The process uses ultrafiltration (UF) membranes modified by a functionalized multi wall carbon nano-tube (F-MWCNT). The modified tube has an inner diameter of 15-30 nm and is added to the OMW treatment process to improve performance of the membrane. Tests were done to evaluate the following operating parameters of the UF system; pressure, pH and temperature; also evaluated parameters of permeate flux, flux decline, COD removal and total phenol rejection. The Taguchi robust design method was applied for an optimization evaluation of the experiments. Variance (ANOVA) analysis was used to determine the most significant parameters affecting permeate flux, flux decline, COD removal and total phenols rejection. Results demonstrated coagulation and pH as the most important factors affecting permeate flux of the UF. Moreover, pH and F-MWCNT UF had significant positive effects on flux decline, COD removal and total phenols rejection. Based on the optimum conditions determined by the Taguchi method, evaluations for permeate flux tests; flux decline, COD removal and total phenols rejection were about 21.2 (kg/m(2) h), 12.6%, 72.6% and 89.5%, respectively. These results were in good agreement with those predicted by the Taguchi method (i.e.; 22.8 (kg/m(2) h), 11.9%, 75.8 and 94.7%, respectively). Mechanical performance of the membrane and its application for high organic wastewater treatment were determined as strong.

[1]  Menachem Elimelech,et al.  Measuring the zeta (electrokinetic) potential of reverse osmosis membranes by a streaming potential analyzer , 1994 .

[2]  Imtiaz Ahmed Choudhury,et al.  Application of Taguchi method in the optimization of end milling parameters , 2004 .

[3]  Ahmad Fauzi Ismail,et al.  Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method , 2002 .

[4]  Eric M.V. Hoek,et al.  A review of water treatment membrane nanotechnologies , 2011 .

[5]  E. Drioli,et al.  Recovery and concentration of polyphenols from olive mill wastewaters by integrated membrane system. , 2010, Water research.

[6]  Vagelis G. Papadakis,et al.  Membrane processing for olive mill wastewater fractionation , 2007 .

[7]  T. Manios,et al.  Treatment of olive mill effluents by coagulation-flocculation-hydrogen peroxide oxidation and effect on phytotoxicity. , 2006, Journal of hazardous materials.

[8]  T. Mohammadi,et al.  Separation of water in oil emulsions using microfiltration , 2005 .

[9]  M. Schnitzer,et al.  MACROMOLECULAR STRUCTURES OF HUMIC SUBSTANCES , 1980 .

[10]  M. Jahanshahi,et al.  Novel functionalized carbon nanotubes for improving the surface properties and performance of polyethersulfone (PES) membrane , 2012 .

[11]  Ezgi Oktav Akdemir,et al.  Investigation of two ultrafiltration membranes for treatment of olive oil mill wastewater , 2009 .

[12]  L. Ersoy,et al.  Characterization and lime treatment of olive mill wastewater. , 2001, Water research.

[13]  Fatma A. El-Gohary,et al.  Integrated treatment of olive mill wastewater (OMW) by the combination of Fenton's reaction and anaerobic treatment. , 2009, Journal of hazardous materials.

[14]  E. Drioli,et al.  Comparison of the performance of UF membranes in olive mill wastewaters treatment. , 2011, Water research.

[15]  Y. Yamini,et al.  Orthogonal array design for the optimization of supercritical carbon dioxide extraction of platinum(IV) and rhenium(VII) from a solid matrix using cyanex 301 , 2008 .

[16]  R. Borja,et al.  Aerobic biodegradation and detoxification of wastewaters from the olive oil industry , 2003 .

[17]  Suat Tanaydin.  Robust Design and Analysis for Quality Engineering , 1996 .

[18]  Menachem Elimelech,et al.  Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes , 1996 .

[19]  Federico Federici,et al.  Olive oil mill wastewater valorisation by fungi , 2006 .

[20]  C Caretti,et al.  Olive mill wastewater treatment: an experimental study. , 2006, Water science and technology : a journal of the International Association on Water Pollution Research.

[21]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[22]  S. Sayadi,et al.  Detoxification of olive mill wastewater by electrocoagulation and sedimentation processes. , 2007, Journal of hazardous materials.

[23]  M. Karpuzcu,et al.  Olive oil mill wastewater treatment by means of electro-coagulation , 2004 .

[24]  A. E. Greenberg,et al.  Standard Methods for the Examination of Water and Wastewater seventh edition , 2013 .

[25]  R. Field,et al.  Critical flux concept for microfiltration fouling , 1995 .

[26]  Sami Sayadi,et al.  Treatment of olive oil mill wastewater by combined process electro-Fenton reaction and anaerobic digestion. , 2006, Water research.

[27]  M. Joseph Davidson,et al.  Experimental investigation on flow-forming of AA6061 alloy—A Taguchi approach , 2008 .

[28]  Amy E. Childress,et al.  Role of membrane surface morphology in colloidal fouling of cellulose acetate and composite aromatic polyamide reverse osmosis membranes , 1997 .

[29]  N. Kalogerakis,et al.  Treatment of olive mill effluents Part II. Complete removal of solids by direct flocculation with poly-electrolytes. , 2005, Environment international.

[30]  R. Lamuela-Raventós,et al.  Analysis of total phenols and other oxidation substrates and antioxidants by means of Folin-Ciocalteu reagent , 1999 .

[31]  Neslihan Manav Demir,et al.  Treatment of olive mill wastewaters by nanofiltration and reverse osmosis membranes , 2010 .

[32]  Y. Choa,et al.  Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method , 2007 .

[33]  Marcel Mulder,et al.  Basic Principles of Membrane Technology , 1991 .

[34]  Vincenza Calabrò,et al.  An integrated centrifugation–ultrafiltration system in the treatment of olive mill wastewater , 2002 .

[35]  Evan Diamadopoulos,et al.  Electrochemical treatment of olive mill wastewater , 2007 .

[36]  Weihua Peng,et al.  Effects of water chemistries and properties of membrane on the performance and fouling¿a model development study , 2004 .

[37]  T. Yonar,et al.  Pre-treatment studies on olive oil mill effluent using physicochemical, Fenton and Fenton-like oxidations processes. , 2010, Journal of hazardous materials.

[38]  Kamal Al-Malah,et al.  Olive mills effluent (OME) wastewater post-treatment using activated clay , 2000 .

[39]  P. Huck.  Measurement of Biodegradable Organic Matter and Bacterial Growth Potential in Drinking Water , 1990 .

[40]  NURI AZBAR,et al.  A Review of Waste Management Options in Olive Oil Production , 2004 .

[41]  Barend J. du Plessis,et al.  The application of the Taguchi method in the evaluation of mechanical flotation in waste activated sludge thickening , 2007 .

[42]  A. S. Koparal,et al.  Electrocoagulation of olive mill wastewaters , 2006 .