Design and workspace analysis of a 3-degree-of-freedom parallel swivel head with large tilting capacity

Traditional parallel mechanisms are usually characterized by small tilting capability. To overcome this problem, a 3-degree-of-freedom parallel swivel head with large tilting capacity is proposed in this article. The proposed parallel swivel head, which is structurally developed from a conventional 3-PRS parallel mechanism, can achieve a large tilting capability by means of structural improvements. First, a modified spherical joint with a maximum tilting angle of ±120° is devised to diminish the physical restrictions on the orientation workspace. Second, a UPS typed leg is introduced for the sake of singularity elimination. The superiority of the proposed parallel swivel head is theoretically proved by investigations of singularity-free orientation workspace and then is experimentally validated using a prototype fabricated. The theoretical and experimental results illustrate that the proposed parallel swivel head has a large tilting capacity and thus can be used as swivel head for a hybrid machine tool which is designed to be capable of realizing both horizontal and vertical machining.

[1]  Qingsong Xu,et al.  Kinematic analysis of a 3-PRS parallel manipulator , 2007 .

[2]  Y Hu,et al.  Robust design and analysis of 4PUS–1RPU parallel mechanism for a 5-degree-of-freedom hybrid kinematics machine , 2011 .

[3]  Qinchuan Li,et al.  Parasitic motion comparison of 3-PRS parallel mechanism with different limb arrangements , 2011 .

[4]  J. A. Carretero,et al.  Quantitative dexterous workspace comparison of parallel manipulators , 2007 .

[5]  Nikos A. Aspragathos,et al.  Index based optimal anatomy of a metamorphic manipulator for a given task , 2012 .

[6]  Clément Gosselin,et al.  Constraint singularities of parallel mechanisms , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[7]  Dragos Axinte,et al.  Theoretical analysis of a special purpose miniature machine tool with parallel kinematics architecture: free-leg hexapod , 2012 .

[8]  Wei Dong,et al.  Development of a parallel kinematic motion simulator platform , 2013 .

[9]  Manfred Weck,et al.  Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .

[10]  Y-C Chang,et al.  Effects of design dimensions on the driving force variation of a hybrid TRR’XY parallel kinematic machine tool , 2002 .

[11]  Chih-Cheng Kao,et al.  Singularity robustness of the 3RPS parallel manipulator by using the damped-rate resolved-acceleration control , 2010, Expert Syst. Appl..

[12]  Yan Jin,et al.  Kinematic modeling of Exechon parallel kinematic machine , 2011 .

[13]  Jochen Maaß,et al.  Singularity prediction for parallel robots for improvement of sensor-integrated assembly , 2005 .

[14]  M. Nategh,et al.  Development of a novel adaptive nonuniform rational basis spline interpolator with limited kinematic error for hexapod machine tools , 2014 .

[15]  C. Gosselin,et al.  Determination of the maximal singularity-free orientation workspace for the Gough–Stewart platform , 2009 .

[16]  C. Gosselin,et al.  Determination of maximal singularity-free zones in the workspace of planar three-degree-of-freedom parallel mechanisms , 2006 .

[17]  Bruno Siciliano,et al.  The Tricept robot: dynamics and impedance control , 2003 .

[18]  Xin-Jun Liu,et al.  Optimization of a redundantly actuated parallel kinematic mechanism for a 5-degree-of-freedom hybrid machine tool , 2014 .

[19]  Guilin Yang,et al.  Workspace generation and planning singularity-free path for parallel manipulators , 2005 .

[20]  Haitao Liu,et al.  Stiffness Modeling of the Tricept Robot Using the Overall Jacobian Matrix , 2009 .

[21]  Clément Gosselin,et al.  Determination of the maximal singularity-free zones in the six-dimensional workspace of the general Gough-Stewart platform , 2007 .

[22]  Steven A. Velinsky,et al.  Determination of the kinematically redundant active prismatic joint variable ranges of a planar parallel mechanism for singularity-free trajectories , 2009 .

[23]  Guilin Yang,et al.  Workspace evaluation of manipulators through finite-partition of SE(3) , 2011 .