A distributed real-time model of degradation in a solid oxide fuel cell, part I: Model characterization

Abstract Despite the high efficiency and flexibility of fuel cells, which make them an attractive technology for the future energy generation, their economic competitiveness is still penalized by their short lifetime, due to multiple degradation phenomena. As a matter of fact, electrochemical performance of solid oxide fuel cells (SOFCs) is reduced because of different degradation mechanisms, which depend on operating conditions, fuel and air contaminants, impurities in materials, and others. In this work, a real-time, one dimensional (1D) model of a SOFC is used to simulate the effects of voltage degradation in the cell. Different mechanisms are summarized in a simple empirical expression that relates degradation rate to cell operating parameters (current density, fuel utilization and temperature), on a localized basis. Profile distributions of different variables during cell degradation are analyzed. In particular, the effect of degradation on current density, temperature, and total resistance of the cell are investigated. An analysis of localized degradation effects shows how different parts of the cell degrade at a different time rate, and how the various profiles are redistributed along the cell as consequence of different degradation rates.

[1]  Randall Gemmen,et al.  Degradation measurement and analysis for cells and stacks , 2008 .

[2]  J. I. Gazzarri,et al.  Electrochemical AC impedance model of a solid oxide fuel cell and its application to diagnosis of multiple degradation modes , 2007 .

[3]  Shunsuke Taniguchi,et al.  Influence of water vapor on long-term performance and accelerated degradation of solid oxide fuel cell cathodes , 2011 .

[4]  David Tucker,et al.  SOFC Lifetime Assessment in Gas Turbine Hybrid Power Systems , 2014 .

[5]  M. Zahid,et al.  Monitoring the degradation of a solid oxide fuel cell stack during 10,000 h via electrochemical impedance spectroscopy , 2012 .

[6]  U. Stimming,et al.  Advances, aging mechanisms and lifetime in solid-oxide fuel cells , 2004 .

[7]  Peter Vang Hendriksen,et al.  Degradation of Anode Supported SOFCs as a Function of Temperature and Current Load , 2006 .

[8]  Jason P. Trembly,et al.  Effects of coal syngas and H2S on the performance of solid oxide fuel cells: Single-cell tests , 2006 .

[9]  Norbert H. Menzler,et al.  Stack Degradation in Dependence of Operation Parameters; the Real‐SOFC Sensitivity Analysis , 2009 .

[10]  Vittorio Verda,et al.  Development of a Detailed Planar Solid Oxide Fuel Cell Computational Fluid Dynamics Model for Analyzing Cell Performance Degradation , 2009 .

[11]  David Tucker,et al.  Accelerated Degradation for Hardware in the Loop Simulation of Fuel Cell-Gas Turbine Hybrid System , 2015 .

[12]  Xin Sun,et al.  A damage model for degradation in the electrodes of solid oxide fuel cells: Modeling the effects of sulfur and antimony in the anode , 2012 .

[13]  Alexander Schuler,et al.  The impact of sulfur on the performance of a solid oxide fuel cell (SOFC) system operated with hydrocarboneous fuel gas , 2009 .

[14]  David Tucker,et al.  A Real-Time Spatial SOFC Model for Hardware-Based Simulation of Hybrid Systems , 2011 .

[15]  Boris Iwanschitz,et al.  Fundamental mechanisms limiting solid oxide fuel cell durability , 2008 .

[16]  Joongmyeon Bae,et al.  Fast performance degradation of SOFC caused by cathode delamination in long-term testing , 2010 .

[17]  Kazunari Sasaki,et al.  Poisoning of SOFC anodes by various fuel impurities , 2008 .

[18]  Boris Iwanschitz,et al.  A model-based approach for current voltage analyses to quantify degradation and fuel distribution in solid oxide fuel cell stacks , 2015 .

[19]  Alberto Traverso,et al.  A distributed real-time model of degradation in a solid oxide fuel cell, part II: Analysis of fuel cell performance and potential failures , 2016 .

[20]  Ayyakkannu Manivannan,et al.  The Role of Solid Oxide Fuel Cells in Advanced Hybrid Power Systems of the Future , 2009 .

[21]  D. Favrat,et al.  Progressive activation of degradation processes in solid oxide fuel cells stacks: Part I: Lifetime extension by optimisation of the operating conditions , 2012 .

[22]  D. A. Noren,et al.  Clarifying the Butler–Volmer equation and related approximations for calculating activation losses in solid oxide fuel cell models , 2005 .

[23]  Nigel P. Brandon,et al.  The effect of current density and temperature on the degradation of nickel cermet electrodes by carbon monoxide in solid oxide fuel cells , 2009 .

[24]  Stephen J. Skinner,et al.  Impedance studies of cathode/electrolyte behaviour in SOFC , 2008 .

[25]  Alberto Traverso,et al.  A Real-Time Degradation Model for Hardware in the Loop Simulation of Fuel Cell Gas Turbine Hybrid Systems , 2015 .

[26]  Anil V. Virkar,et al.  A Model for Solid Oxide Fuel Cell (SOFC) Stack Degradation , 2007, ECS Transactions.