Synergy of cavitation and slurry erosion in the slurry pot tester

Abstract Hydraulic machine materials are routinely tested under laboratory conditions to study the effects of slurry erosion and cavitation erosion. The material removal may occur by either of the modes or by their combined effect. To evaluate the damage in the latter case, where the damage can be severe, there is a need for a suitable test method that combines the two modes. With this objective, a new simple method is developed that combines the effect of slurry erosion and cavitation erosion. Triangular prismatic bluff bodies are used as cavitation inducers in the conventional slurry pot tester. In the slurry pot the brass test specimens are exposed to water/slurry, with and without cavitation inducers. Analysis of the wear results reveals significant variations in material loss confirming synergistic erosion damage. The new laboratory testing method can be very useful in assessing and ranking of the material performance under combined particle and cavitation erosion conditions.

[1]  R. Arndt,et al.  Cavitation Erosion in Hydroturbines , 1989 .

[2]  P. Brandner,et al.  An experimental investigation of cloud cavitation about a sphere , 2010, Journal of Fluid Mechanics.

[3]  R. Arndt.  Cavitation in Fluid Machinery and Hydraulic Structures , 1981 .

[4]  C. Knisely.  STROUHAL NUMBERS OF RECTANGULAR CYLINDERS AT INCIDENCE: A REVIEW AND NEW DATA , 1990 .

[5]  P. Bhaskaran.  Characteristics of flow past bluff cavitating sources , 1977 .

[6]  R. Chattopadhyay,et al.  High silt wear of hydroturbine runners , 1993 .

[7]  Ian M. Hutchings,et al.  Wear by particulates , 1987 .

[8]  K. Suslick,et al.  Applications of Ultrasound to Materials Chemistry , 1995 .

[9]  François Avellan,et al.  Comparison of erosion mechanisms in different types of cavitation , 1986 .

[10]  H. Clark.  Particle velocity and size effects in laboratory slurry erosion measurements OR... do you know what your particles are doing , 2002 .

[11]  Alan V. Levy,et al.  Experimental measurement of accelerated erosion in a slurry pot tester , 1981 .

[12]  Yves Lecoffre,et al.  Cavitation Bubble Trackers , 1999 .

[13]  Peter J. Blau,et al.  Development and use of ASTM standards for wear testing , 1999 .

[14]  D. Lohse,et al.  The acceleration of solid particles subjected to cavitation nucleation , 2008, Journal of Fluid Mechanics.

[15]  J. Holl,et al.  Effects of Cavitation on Periodic Wakes Behind Symmetric Wedges , 1966 .

[16]  Frédéric Caupin,et al.  Cavitation in water: a review , 2006 .

[17]  C. Duan,et al.  Abrasive Erosion and Corrosion of Hydraulic Machinery , 2003 .

[18]  J.W.M. Mens,et al.  Erosion in seawater sand slurries , 1986 .

[19]  I. S. Pearsall,et al.  Cavitation Inception in Pumps , 1982 .

[20]  Hengyun Jin,et al.  THE ROLE OF SAND PARTICLES ON THE RAPID DESTRUCTION OF THE CAVITATION ZONE OF HYDRAULIC-TURBINES , 1986 .

[21]  M. Gee,et al.  A new concept in liquid jet erosion: Commissioning and proving trials , 2007 .

[22]  R. P. Saini,et al.  Study of cavitation in hydro turbines—A review , 2010 .

[23]  Robert E. Apfel,et al.  Acoustic cavitation inception , 1984 .

[24]  K. Budinski.  Guide to friction, wear, and erosion testing , 2007 .

[25]  R. Balachandar,et al.  Wake and cavitation characteristics of equilateral prisms at incidence , 1992 .

[26]  K. Hokkirigawa,et al.  Scanning electron microscopy observation on the incubation period of vibratory cavitation erosion , 1991 .

[27]  H. Awbi.  Effect of blockage on the strouhal number of two-dimensional bluff bodies , 1983 .

[28]  R. Galgali,et al.  Synthesis, characterization and effect of microstructure on slurry erosion resistance of cast Fe-TiC composites , 2009 .

[29]  J. Franc,et al.  Cavitation in the rotational structures of a turbulent wake , 1995, Journal of Fluid Mechanics.

[30]  Bhupendra K. Gandhi,et al.  Improvement in the design of a pot tester to simulate erosion wear due to solid–liquid mixture , 2005 .

[31]  R. P. Saini,et al.  Effect of size and concentration of silt particles on erosion of Pelton turbine buckets , 2009 .

[32]  J. Franc,et al.  Fundamentals of Cavitation , 2004 .