Preparation and properties of C/C−ZrB2−SiC composites by high-solid-loading slurry impregnation and polymer infiltration and pyrolysis (PIP)
暂无分享,去创建一个
Fei Rao | Liping Ran | Ke Peng | M. Yi | Huan Yin
[1] Lai-fei Cheng,et al. Oxidation degradation and mechanical reduction on C/SiC composites with artificial notch defects , 2018, Ceramics International.
[2] Yuehuan Li,et al. Carbon layer-exfoliated, wettability-enhanced, SO3H-functionalized carbon paper: A superior positive electrode for vanadium redox flow battery , 2018 .
[3] Q. Fu,et al. Preparation, ablation behavior and thermal retardant ability of C/C-HfB2-SiC composites , 2017 .
[4] Xinghong Zhang,et al. Preparation of ZrB2-SiC ceramics by single-step and optimized two-step hot pressing using nanosized ZrB2 powders , 2017 .
[5] Q. Fu,et al. The ablation behavior and mechanical property of C/C-SiC-ZrB2 composites fabricated by reactive melt infiltration , 2017 .
[6] Hongwei Liu,et al. Effect of ZrC–SiC content on microstructure and ablation properties of C/C composites , 2016 .
[7] Qizhong Huang,et al. Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis , 2015 .
[8] S. Bai,et al. Reactive melt infiltration of a ZrB2 modified C/ZrC composite by a eutectic Zr–B alloy , 2015 .
[9] Wei Sun,et al. Preparation and ablation properties of ZrB2–SiC protective laminae for carbon/carbon composites , 2014 .
[10] Xin Yang,et al. Pyrolysis mechanism of ZrC precursor and fabrication of C/C-ZrC composites by precursor infiltration and pyrolysis , 2014 .
[11] Hejun Li,et al. Effect of heat flux on ablation behaviour and mechanism of C/C–ZrB2–SiC composite under oxyacetylene torch flame , 2013 .
[12] 孟祥利,et al. 浆料浸渍法制备C/C-SiC-ZrB2超高温复合材料及其烧蚀性能研究 , 2013 .
[13] Jiaping Zhang,et al. SiC–MoSi2/ZrO2–MoSi2 coating to protect C/C composites against oxidation , 2013 .
[14] Ping Hu,et al. Preparation of high solid loading, low viscosity ZrB2–SiC aqueous suspensions using PEI as dispersant , 2013 .
[15] L. Chai,et al. Preparation and oxidation resistance of mullite/SiC coating for carbon materials at 1150 °C , 2012 .
[16] Xinghong Zhang,et al. Gelcasting of complex-shaped ZrB2–SiC ultra high temperature ceramic components , 2012 .
[17] Yue Zhang,et al. Formation Mechanism of Zircon Phase in ZrB 2 -SiC Ceramic Composites during Oxidation: Formation Mechanism of Zircon Phase in ZrB 2 -SiC Ceramic Composites during Oxidation , 2011 .
[18] Hejun Li,et al. Ablation of the carbon/carbon composite nozzle-throats in a small solid rocket motor , 2011 .
[19] Lai-fei Cheng,et al. Preparation and properties of 2D C/SiC–ZrB2–TaC composites , 2011 .
[20] William E Lee,et al. Reactive infiltration processing (RIP) of ultra high temperature ceramics (UHTC) into porous C/C composite tubes , 2011 .
[21] H. Hu,et al. Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process , 2010 .
[22] C. Hong,et al. Ablation behavior of ZrB2–SiC–ZrO2 ceramic composites by means of the oxyacetylene torch , 2009 .
[23] Y. Leong,et al. Interparticle forces in spherical monodispersed silica dispersions: effects of branched polyethylenimine and molecular weight. , 2009, Journal of colloid and interface science.
[24] Lai-fei Cheng,et al. Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites Under Oxyacetylene Torch Flame , 2009 .
[25] Jingyi Deng,et al. Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites , 2009 .
[26] G. Hilmas,et al. Enhanced densification and mechanical properties of ZrB2–SiC processed by a preceramic polymer coating route , 2008 .
[27] Jiecai Han,et al. Oxidation-resistant ZrB2-SiC composites at 2200 °C , 2008 .
[28] Ke Yang,et al. Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler , 2006 .
[29] Soojin Park,et al. Influence of molybdenum disilicide filler on carbon-carbon composites , 1999 .
[30] H. C. Graham,et al. Thermogravi metric Study of the Oxidation of ZrB2 in the Temperature Range of 800° to 1500°C , 1971 .