Design and Analysis of Novel Asymmetric-Stator-Pole Flux Reversal PM Machine

This paper proposes a novel flux reversal permanent magnet (FRPM) machine with asymmetric-stator-pole (ASP) configuration. Different from the conventional FRPM machine with uniform “NS-NS-NS” PM sequence, the proposed ASP-FRPM machine is characterized by a “NSN-S-NSN” magnet arrangement. Hence, the interpolar flux leakage is significantly reduced with the developed design, which can improve the torque capability. The machine topologies, features, and operating principle are introduced, respectively. A simplified magnetic circuit model is established to reveal the underlying flux leakage reduction mechanism of the ASP design, and the rotor pole number is analytically optimized as well. The design parameters are then globally optimized so as to improve the torque quality. In addition, the electromagnetic characteristics of the ASP- and conventional FRPM machines are compared. Finally, experiments have been carried out to validate the theoretical results.

[1]  Geraint W. Jewell,et al.  Performance Comparison of Doubly Salient Reluctance Machine Topologies Supplied by Sinewave Currents , 2016, IEEE Transactions on Industrial Electronics.

[2]  Hui Yang,et al.  A variable-mode stator consequent pole memory machine , 2018 .

[3]  Jiabin Wang,et al.  Design and Analysis of a Linear Permanent- Magnet Vernier Machine With Improved Force Density , 2016, IEEE Transactions on Industrial Electronics.

[4]  Ju Lee,et al.  Various design techniques to reduce cogging torque in flux-reversal machines , 2005, 2005 International Conference on Electrical Machines and Systems.

[5]  Tadashi Fukami,et al.  A Multipole Synchronous Machine With Nonoverlapping Concentrated Armature and Field Windings on the Stator , 2012, IEEE Transactions on Industrial Electronics.

[6]  T.A. Lipo,et al.  A novel permanent magnet motor with doubly salient structure , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[7]  B. G. Fernandes,et al.  Analysis of Flux-Reversal Machine Based on Fictitious Electrical Gear , 2010, IEEE Transactions on Energy Conversion.

[8]  Z. Zhu,et al.  Electromagnetic Performance of Novel Synchronous Machines With Permanent Magnets in Stator Yoke , 2014, IEEE Transactions on Magnetics.

[9]  Yuting Gao,et al.  Design and Analysis of a Flux Reversal Machine With Evenly Distributed Permanent Magnets , 2018, IEEE Transactions on Industry Applications.

[10]  Z. Q. Zhu,et al.  Individual and global optimization of switched flux permanent magnet motors , 2011, 2011 International Conference on Electrical Machines and Systems.

[11]  Chunhua Liu,et al.  Design and Analysis of a Cost-Effective Magnetless Multiphase Flux-Reversal DC-Field Machine for Wind Power Generation , 2015, IEEE Transactions on Energy Conversion.

[12]  Wei Hua,et al.  An Improved Configuration for Cogging Torque Reduction in Flux-Reversal Permanent Magnet Machines , 2017, IEEE Transactions on Magnetics.

[13]  Yuting Gao,et al.  Design of three-phase flux reversal machines with fractional-slot windings , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[14]  P. Upadhyay,et al.  Torque ripple reduction in the flux reversal motor by rotor pole shaping and stator excitation , 2008, 2008 International Conference on Electrical Machines and Systems.

[15]  H. Y. Li,et al.  Comparative Study of Air-Gap Field Modulation in Flux Reversal and Vernier Permanent Magnet Machines , 2018, IEEE Transactions on Magnetics.

[16]  Wei Hua,et al.  Analysis of Back-EMF in Flux-Reversal Permanent Magnet Machines by Air Gap Field Modulation Theory , 2019, IEEE Transactions on Industrial Electronics.

[17]  Z. Q. Zhu,et al.  A Novel Brushless AC Doubly Salient Stator Slot Permanent Magnet Machine , 2016, IEEE Transactions on Energy Conversion.

[18]  Ion Boldea,et al.  Theoretical characterization of flux reversal machine in low-speed servo drives-the pole-PM configuration , 2002 .

[19]  Z. Q. Zhu,et al.  Influence of magnet arrangement on performance of flux reversal permanent magnet machine , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[20]  Ronghai Qu,et al.  Consequent-Pole Flux-Reversal Permanent-Magnet Machine for Electric Vehicle Propulsion , 2016, IEEE Transactions on Applied Superconductivity.

[21]  Yu Wang,et al.  Hybrid Excitation Topologies and Control Strategies of Stator Permanent Magnet Machines for DC Power System , 2012, IEEE Transactions on Industrial Electronics.

[22]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[23]  B. G. Fernandes,et al.  Power density improvement of three phase flux reversal machine with distributed winding , 2010 .

[24]  I. Boldea,et al.  The flux-reversal machine: a new brushless doubly-salient permanent-magnet machine , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[25]  Hui Yang,et al.  A novel flux-reversal hybrid magnet memory machine , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[26]  David G. Dorrell,et al.  Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview , 2014, IEEE Transactions on Industrial Electronics.

[27]  Wei Hua,et al.  Overview of Stator-Permanent Magnet Brushless Machines , 2011, IEEE Transactions on Industrial Electronics.

[28]  D. Howe,et al.  Influence of Skew and Cross-Coupling on Flux-Weakening Performance of Permanent-Magnet Brushless AC Machines , 2009, IEEE Transactions on Magnetics.

[29]  Xiaoyan Huang,et al.  Design and Performance Investigation of Novel Linear Switched Flux PM Machines , 2017, IEEE Transactions on Industry Applications.