Hydrogen-enriched natural gas blend oxidation under high-pressure conditions: Experimental and detailed chemical kinetic modeling

Abstract For the first time, experimental results were obtained for the kinetics of oxidation of hydrogen/natural gas mixtures in a fused silica jet-stirred reactor operating at 10 atm, over the temperature range 900–1200 K for equivalence ratios of 0.3, 0.6, and 1. The concentration profiles of the reactants, stable intermediates and the final products were measured by probe sampling followed by on-line FTIR analyses and off-line GC-TCD/FID analyses. The addition of hydrogen in variable concentrations significantly increases the reactivity of the natural gas blend used (methane–ethane 10:1), particularly under fuel-lean conditions. The present experiments were modeled by means of a detailed chemical kinetic reaction mechanism (97 species involved in 732 reversible reactions). We obtained an overall good agreement between the present data and the modeling. According to the proposed kinetic scheme, the enhanced oxidation of methane by hydrogen proceeds through an increased production of OH. The increase in hydrogen initial concentration boosts the formation of HO 2 radicals at low temperature, yielding higher concentrations of H 2 O 2 and OH. The oxidation of hydrogen, methane and ethane mostly proceeds via reaction with OH. The following sequence of reactions summarizes the mechanism yielding the observed reactivity increase in hydrogen-enriched mixtures: CH 3 + H 2 ⇒ CH 4 + H ; H + O 2 ⇒ HO 2 ; 2 HO 2 ⇒ H 2 O 2 + O 2 ; H 2 O 2 ⇒ 2 OH ; HO 2 + H ⇒ 2 OH ; OH + H 2 ⇒ H 2 O + H followed by reactions of hydrocarbons with OH. The proposed kinetic scheme was also used to simulate the burning velocities of methane–hydrogen–air mixtures over the pressure range 1–5 atm.

[1]  Robert J. Kee,et al.  PSE: a Fortran program for modeling well-stirred reactors , 1986 .

[2]  P. Dagaut,et al.  Mutual Sensitization of the Oxidation of Nitric Oxide and Simple Fuels Over an Extended Temperature Range: Experimental and Detailed Kinetic Modeling , 1999 .

[3]  Robert J. Kee,et al.  PREMIX :A F ORTRAN Program for Modeling Steady Laminar One-Dimensional Premixed Flames , 1998 .

[4]  P. Dagaut,et al.  Kinetics of oxidation of a LPG blend mixture in a JSR: experimental and modeling study☆ , 2003 .

[5]  R. Ravikumar,et al.  Unition Delay of Methane in Reflected Shock Waves , 1980 .

[6]  T. Tsotsis,et al.  Strain-rate effects on hydrogen-enhanced lean premixed combustion , 2001 .

[7]  G. Searby,et al.  A Numerical Study of Lean CH4/H2/Air Premixed Flames at High Pressure , 1998 .

[8]  D. Anderson.  Effect of hydrogen injection stability and emissions of an experimental premixed prevaporized propane burner , 1975 .

[9]  P. Dagaut,et al.  Oxidation and Ignition of Methane-Propane and Methane-Ethane-Propane Mixtures: Experiments and Modeling , 1994 .

[10]  A. K. Oppenheim,et al.  Autoignition in methanehydrogen mixtures , 1984 .

[11]  Chung King Law,et al.  Laminar flame speeds of hydrocarbon + air mixtures with hydrogen addition☆ , 1986 .

[12]  Marco J. Castaldi,et al.  Aromatic and Polycyclic Aromatic Hydrocarbon Formation in a Laminar Premixed n-Butane Flame , 1998 .

[13]  P. Dagaut,et al.  The Low Temperature Oxidation of DME and Mutual Sensitization of the Oxidation of DME and Nitric Oxide: Experimental and Detailed Kinetic Modeling , 2001 .

[14]  Kevin J. Hughes,et al.  Development and testing of a comprehensive chemical mechanism for the oxidation of methane , 2001 .

[15]  Christopher M. Boggs,et al.  Influence of H2 on the response of lean premixed CH4 flames to high strained flows , 2003 .

[16]  S. R. Bell,et al.  Extension of the lean operating limit for natural gas fueling of a spark ignited engine using hydrogen blending , 1997 .