B2O3 modified SiC–MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation

Abstract To protect carbon/carbon (C/C) composites against oxidation, a B 2 O 3 modified SiC–MoSi 2 coating was prepared by a two-step pack cementation. The microstructure and the oxidation resistant property of the coating were studied. The results show that, the as-received coating is a dense structure, and is composed of α-SiC, β-SiC and MoSi 2 . The B 2 O 3 modified SiC–MoSi 2 coating has excellent oxidation resistant property, and can protect C/C composites from oxidation at 1773 K in air for more than 242 h. The failure of the coating was considered to arise from the existence of the penetration cracks in the coating during the slow cooling from 1873 to 673 K.

[1]  Hejun Li,et al.  A Si–Mo oxidation protective coating for C/SiC coated carbon/carbon composites , 2007 .

[2]  Li Kezhi,et al.  SiC whisker-toughened MoSi2–SiC–Si coating to protect carbon/carbon composites against oxidation , 2006 .

[3]  Li Kezhi,et al.  Silicide coating for protection of C/C composites at 1873 K , 2006 .

[4]  Hejun Li,et al.  A MoSi2–SiC–Si oxidation protective coating for carbon/carbon composites , 2007 .

[5]  杨峥,et al.  OXIDATION RESISTANCE AND SELF-SEALING PROPERTY OF CERAMIC COATINGS FOR C/C COMPOSITES , 1999 .

[6]  Donald M. Curry,et al.  Oxidation microstructure studies of reinforced carbon/carbon , 2006 .

[7]  Jingchuan Zhu,et al.  A Si-Mo fused slurry coating for oxidation protection of carbon-carbon composites , 2001 .

[8]  G. Savage.  Carbon-carbon composites , 1993 .

[9]  Robert C. Morris,et al.  Rapid densification of porous carbon–carbon composites by thermal‐gradient chemical vapor infiltration , 1995 .

[10]  Monica Ferraris,et al.  Multilayer coating with self-sealing properties for carbon-carbon composites , 2003 .

[11]  H. Abicht,et al.  The influence of different additives and the mode of their addition on the sintering behavior and the properties of semiconducting barium titanate ceramics , 1998 .

[12]  Hejun Li,et al.  Preparation and oxidation kinetics mechanism of three-layer multi-layer-coatings-coated carbon/carbon composites , 2006 .

[13]  Hejun Li,et al.  SiC–MoSi2–(Ti0.8Mo0.2)Si2 multi-composition coating for carbon/carbon composites , 2006 .

[14]  Jingli Shi,et al.  SiC/Si–MoSi2 oxidation protective coatings for carbon materials , 2006 .

[15]  Xiaohong Shi,et al.  A MoSi2–SiC–Si/glass oxidation protective coating for carbon/carbon composites , 2006 .

[16]  Chen Feng,et al.  A multilayer coating of dense SiC alternated with porous Si–Mo for the oxidation protection of carbon/carbon silicon carbide composites , 2008 .

[17]  R. W. Rauser,et al.  Oxidation through coating cracks of SiC-protected carbon/carbon , 2008 .