Effect of tool geometry on mechanical behavior of friction stir spot welds of polycarbonate sheets
暂无分享,去创建一个
[1] J. Norberto Pires,et al. A novel friction stir welding robotic platform: welding polymeric materials , 2016 .
[2] M. F. Jamaludin,et al. Effect of Surface States on Joining Mechanisms and Mechanical Properties of Aluminum Alloy (A5052) and Polyethylene Terephthalate (PET) by Dissimilar Friction Spot Welding , 2016 .
[3] A. Paoletti,et al. Effect of tool geometry on loads developing in friction stir spot welds of polycarbonate sheets , 2016 .
[4] A. Paoletti,et al. Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers , 2016 .
[5] Chao Li,et al. Microstructure and tensile properties of dissimilar submerged friction stir welds between HDPE and ABS sheets , 2016, The International Journal of Advanced Manufacturing Technology.
[6] S. T. Amancio-Filho,et al. On the feasibility of a friction-based staking joining method for polymer-metal hybrid structures , 2016 .
[7] Jicheng Gao,et al. Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process , 2015 .
[8] S. T. Amancio-Filho,et al. Friction spot welding of carbon fiber-reinforced polyamide 66 laminate , 2015 .
[9] Abhay Sharma,et al. Induction heated tool assisted friction-stir welding (i-FSW): A novel hybrid process for joining of thermoplastics , 2015 .
[10] T. Azdast,et al. Mechanical properties of friction-stir-welded polyamide sheets , 2015 .
[11] A. Paoletti,et al. Mechanical behaviour of friction stir spot welds of polycarbonate sheets , 2015 .
[12] M. B. Givi,et al. Experimental optimization of the mechanical properties of friction stir welded Acrylonitrile Butadiene Styrene sheets , 2015 .
[13] M. B. Givi,et al. Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates , 2015 .
[14] S. T. Amancio-Filho,et al. Friction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strength , 2015 .
[15] Pedro Neto,et al. Morphology and strength of acrylonitrile butadiene styrene welds performed by robotic friction stir welding , 2014 .
[16] S. T. Amancio-Filho,et al. Feasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocomposite , 2014 .
[17] S. T. Amancio-Filho,et al. Friction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRP , 2014 .
[18] Dulce Maria Rodrigues,et al. Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: Literature review, experimental results and empirical analysis , 2014 .
[19] Pedro Neto,et al. Effect of friction stir welding parameters on morphology and strength of acrylonitrile butadiene styrene plate welds , 2014 .
[20] S. T. Amancio-Filho,et al. Friction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performance , 2014 .
[21] Samrand Rash Ahmadi,et al. Friction stir welding of thermoplastics using a newly designed tool , 2014 .
[22] Kazuhiro Nakata,et al. Joining of metal to plastic using friction lap welding , 2014 .
[23] S. T. Amancio-Filho,et al. Mechanical and failure behaviour of hybrid polymer–metal staked joints , 2013 .
[24] Samrand Rash Ahmadi,et al. Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets , 2013 .
[25] R. Farsani,et al. Influence of Pin Profile on Quality of Friction Stir Lap Welds in Carbon Fiber Reinforced Polypropylene Composite , 2012 .
[26] Yahya Bozkurt,et al. The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets , 2012 .
[27] M. Bilici,et al. Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene , 2012 .
[28] M. Kurtulmuş. Friction stir spot welding parameters for polypropylene sheets , 2012 .
[29] Ehsan Azarsa,et al. Effect of Process Parameters and Tool Coating on Mechanical Properties and Microstructure of Heat Assisted Friction Stir Welded Polyethylene Sheets , 2012 .
[30] Amir Mostafapour,et al. A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: Investigating microstructure, tensile and flexural properties , 2012 .
[31] Gholamhassan Payganeh,et al. Effects of friction stir welding process parameters on appearance and strength of polypropylene composite welds , 2011 .
[32] Ahmet İrfan Yükler,et al. The optimization of welding parameters for friction stir spot welding of high density polyethylene sheets , 2011 .
[33] S. T. Amancio-Filho,et al. Preliminary study on the feasibility of friction spot welding in PMMA , 2010 .
[34] Paulo J. Tavares,et al. Effect of Friction Stir Welding Parameters with Newly Developed Tool for Lap Joint of Dissimilar Polymers , 2015 .
[35] G. D’Urso. Thermo-mechanical characterization of friction stir spot welded AA6060 sheets: Experimental and FEM analysis , 2015 .
[36] A. Di Ilio,et al. Optimization of friction stir welding of thermoplastics , 2015 .
[37] K. Panneerselvam,et al. Joining of Nylon 6 plate by friction stir welding process using threaded pin profile , 2014 .
[38] Ali Doniavi,et al. An experimental study on mechanical properties of friction stir welded ABS sheets , 2013 .
[39] M. Bilici. Effect of tool geometry on friction stir spot welding of polypropylene sheets , 2012 .
[40] M. Bilici,et al. Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets , 2012 .
[41] Ahmet İrfan Yükler,et al. Effects of welding parameters on friction stir spot welding of high density polyethylene sheets , 2012 .