Sensors and actuators for prosthetic systems

Although mechanical components, packaging techniques, microprocessors, and application-specific integrated circuits for prosthesis control are available, there is a pressing need for sensors and actuators to complete the system. These devices not only have to be functional, they have to be small in size, consume small amounts of power, and be operable by nontechnical personnel including the patient. They should also have good long-term stability and reliability. Furthermore, they should have a fail-safe feature when damaged so that they will not emit toxic substances when overheated or burned to failure. The author summarizes microsensor and microactuator development for prosthetic systems, including electrodes (recording and stimulating); position, displacement, velocity, and acceleration sensors; force, touch, and pressure sensors; chemical and biosensors; pumps, valves, and controlled-resistance devices; and microactuators.<<ETX>>

[1]  M. Theunissen,et al.  Application of Preferential Electrochemical Etching of Silicon to Semiconductor Device Technology , 1970 .

[2]  David M. Bayer,et al.  A Two-Axis Shoulder Position Transducer for Control of Orthotic/Prosthetic Devices , 1972, IEEE Transactions on Industrial Electronics and Control Instrumentation.

[3]  Wen H. Ko,et al.  Cerebrospinal fluid control system , 1988 .

[4]  R. Muller,et al.  Pin joints, gears, springs, cranks, and other novel micromechanical structures , 1987 .

[5]  W. Ko,et al.  Intracranial Pressure Telemetry System Using Semicustom Integrated Circuits , 1986, IEEE Transactions on Biomedical Engineering.

[6]  Wen H. Ko,et al.  Solid-State Physical Transducers for Biomedical Research , 1986, IEEE Transactions on Biomedical Engineering.

[7]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[8]  O. Prohaska,et al.  Thin-Film Multiple Electrode Probes: Possibilities and Limitations , 1986, IEEE Transactions on Biomedical Engineering.

[9]  Michael R. Neuman,et al.  Sensors for Use with Functional Neuromuscular Stimulation , 1986, IEEE Transactions on Biomedical Engineering.

[10]  Vincent M. Donnelly,et al.  The design of plasma etchants , 1981 .

[11]  Wen H. Ko,et al.  VLSI and intelligent transducers , 1981 .

[12]  J. R. Mallon,et al.  Silicon fusion bonding for pressure sensors , 1988, IEEE Technical Digest on Solid-State Sensor and Actuator Workshop.

[13]  W. Ko,et al.  Development of a miniature pressure transducer for biomedical applications , 1979, IEEE Transactions on Electron Devices.

[14]  E. Bassous.  Fabrication of novel three-dimensional microstructures by the anisotropic etching of , 1978, IEEE Transactions on Electron Devices.

[15]  W. Ko,et al.  A constant flow-rate microvalve actuator based on silicon and micromachining technology , 1988, IEEE Technical Digest on Solid-State Sensor and Actuator Workshop.