A continuum constitutive model for the simulation of fabric-reinforced composites

[1]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[2]  Pierre Ladevèze,et al.  Damage modelling of the elementary ply for laminated composites , 1992 .

[3]  Pierre Ladevèze,et al.  A damage computational method for composite structures , 1992 .

[4]  N. Takeda,et al.  Notched Strength and Fracture Criterion in Fabric Composite Plates Containing a Circular Hole , 1995 .

[5]  G.A.O. Davies,et al.  Characterization of thick glass woven roving/polyester laminates: 1. Tension, compression and shear , 1995 .

[6]  Robert L. Taylor,et al.  A constitutive model for anisotropic damage in fiber-composites , 1995 .

[7]  B. N. Cox,et al.  Handbook of Analytical Methods for Textile Composites , 1997 .

[8]  Alastair Johnson,et al.  Computational methods for predicting impact damage in composite structures , 2001 .

[9]  Joris Degrieck,et al.  A failure model for the analysis of thin woven glass composite structures under impact loadings , 2001 .

[10]  C. Hochard,et al.  Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure , 2001 .

[11]  V. Srivastava.  Notched strength prediction of laminated composite under tensile loading , 2002 .

[12]  M. Kumosa,et al.  Mechanical response of a woven graphite/polyimide composite to in-plane shear dominated loads at room and elevated temperatures , 2004 .

[13]  M. Kumosa,et al.  In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites , 2004 .

[14]  C. Key,et al.  Comparison of MCT Failure Prediction Techniques and Experimental Verification for Biaxially Loaded Glass Fabric-reinforced Composite Laminates , 2004 .

[15]  Pedro P. Camanho,et al.  Failure Criteria for FRP Laminates , 2005 .

[16]  Lorenzo Iannucci,et al.  Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .

[17]  Lorenzo Iannucci,et al.  An energy based damage mechanics approach to modelling impact onto woven composite materials-Part I: Numerical models , 2006 .

[18]  M. Fouinneteau.  Damage and failure modelling of carbon and glass 2D braided composites , 2006 .

[19]  Pedro P. Camanho,et al.  A continuum damage model for composite laminates: Part II – Computational implementation and validation , 2007 .

[20]  Kwansoo Chung,et al.  Constitutive modeling of woven composites considering asymmetric/anisotropic, rate dependent, and nonlinear behavior , 2007 .

[21]  Lorenzo Iannucci,et al.  An energy based damage mechanics approach to modelling impact onto woven composite materials: Part II. Experimental and numerical results , 2007 .

[22]  Pedro P. Camanho,et al.  A continuum damage model for composite laminates: Part I - Constitutive model , 2007 .

[23]  M. Accorsi,et al.  A progressive failure theory for woven polymer-based composites subjected to dynamic loading , 2009 .

[24]  P. Camanho,et al.  A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites , 2009 .

[25]  C. Hochard,et al.  A generalized damage model for woven ply laminates under static and fatigue loading conditions , 2010 .

[26]  M. Gude,et al.  A phenomenologically based damage model for 2D and 3D-textile composites with non-crimp reinforcement , 2011 .

[27]  Amanda Jacob,et al.  Composites can be recycled , 2011 .

[28]  H. Ahmad.  FINITE ELEMENT-BASED STRENGTH PREDICTION FOR NOTCHED AND MECHANICALLY FASTENED WOVEN FABRIC COMPOSITES , 2012 .

[29]  D. Leguillon,et al.  A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate , 2012 .

[30]  J. Renart,et al.  Nominal strength of quasi-brittle open hole specimens , 2012 .

[31]  N. Gascons,et al.  Size Effect Law and Critical Distance Theories to Predict the Nominal Strength of Quasibrittle Structures , 2013 .