The Influence of Quality Management System on the Operation of Periodical Technical Inspection Stations

This article deals with the minimum requirements for quality management at Periodical Technical Inspection Stations (PTIS) for road vehicles in the Slovak Republic, as well as in selected countries of the European Union. Specifically, it contains research performed at all of the PTIS in the Slovak Republic with a focus on the established quality management system and the number of employees of companies operating these PTIS, as well as similar research in selected countries of the European Union. Based on the research results, the article contains an assessment of the influence of the implemented quality management system on the operation of PTIS. The analysis of the results showed that 86.7% of PTIs have an established system to meet the minimum requirements for quality management through a documented procedure (internal regulation), and 13.3% of the PTI have the certified quality management system according to the STN EN ISO/IEC 9001 standard. Unfortunately, no PTI in the Slovak Republic has the fulfilment of quality management requirements according to the standard STN EN ISO/IEC 17020.

[1]  H. Bąkowski,et al.  Analiza międzynarodowego transportu produktów chemicznych w państwach Grupy Wyszehradzkiej , 2018 .

[2]  R Thurmayr,et al.  [Quality management with information systems]. , 2002, Kongressband. Deutsche Gesellschaft fur Chirurgie. Kongress.

[3]  Thomas Lutz,et al.  Considerations of Periodical Technical Inspection of Vehicles with deNO x Systems , 2019 .

[4]  Jonas Matijošius,et al.  Analysis of the influence of fatigue on passenger transport drivers' performance capacity , 2012 .

[5]  Antoni Świć,et al.  Accuracy Control in the Process of Low-Rigidity Elastic Deformable Shafts Turning , 2019, Tehnicki vjesnik - Technical Gazette.

[6]  Ján Ondruš,et al.  Practical Use of the Braking Attributes Measurements Results , 2017 .

[7]  C. Ferrari,et al.  A bootstrap analysis to investigate the economic efficiency of the logistics industry in Italy* , 2018 .

[8]  A. Kalašová,et al.  Air Filter and Selected Vehicle Characteristics , 2020 .

[9]  A. Hoagland,et al.  It's No Accident: Evaluating the Effectiveness of Vehicle Safety Inspections , 2018 .

[10]  Eduard Tsybunov,et al.  Interactive (Intelligent) Integrated System for the Road Vehicles’ Diagnostics , 2017 .

[11]  Ádám Török,et al.  THE ANALYSIS OF THE TRAFFIC SIGNS VISIBILITY DURING NIGHT DRIVING , 2018, Advances in Science and Technology Research Journal.

[12]  Iwona Rybicka,et al.  Distraction of the Driver and Its Impact on Road Safety , 2020 .

[13]  Ján Ližbetin,et al.  The Influence of Human Factor on Congestion Formation on Urban Roads , 2017 .

[14]  Borna Abramović,et al.  Traffic State Estimation and Classification on Citywide Scale Using Speed Transition Matrices , 2020, Sustainability.

[15]  E. Ngai,et al.  Energy and utility management maturity model for sustainable manufacturing process , 2013 .

[16]  Rafał Stanisław Jurecki,et al.  Young Adult Drivers: Simulated Behaviour in a Car-following Situation , 2017 .

[17]  Ladislav Bartuška,et al.  The Effects of Vehicle Load on Driving Characteristics , 2018 .

[18]  Jonas Matijošius,et al.  Investigation of Drivers’ Comfort Factors Influencing Urban Traffic Safety , 2018, Vision Zero for Sustainable Road Safety in Baltic Sea Region.

[19]  Vlatka Stupalo,et al.  Analysis of Intermodal Terminals Service Quality in the Republic of Croatia , 2012 .

[20]  Iwona Rybicka,et al.  Drivers ’reaction time research in the conditions in the real traffic , 2020 .

[21]  Kazimierz Lejda,et al.  Motor vehicle diagnosis in terms of technical facilities requirements , 2013 .

[22]  Martin Kendra,et al.  Environmental Comparison of Different Transport Modes , 2018, Naše more.

[23]  Radovan Madleňák,et al.  Optimization of the Position of the Local Distribution Centre of the Regional Post Logistics Network , 2017 .

[24]  Andrzej Gajek,et al.  Directions for the development of periodic technical inspection for motor vehicles safety systems , 2018, The Archives of Automotive Engineering – Archiwum Motoryzacji.

[25]  M O Karpushko,et al.  To a question of the setting of measures for culvert repair during technical inspection , 2019 .

[26]  Borna Abramović,et al.  Criteria for the Quality of Services of Public Interest Organized by Train Operators , 2019 .

[27]  Andras Varhelyi.  Road Safety Management ‒ The Need for a Systematic Approach , 2016 .

[28]  M. Gogola,et al.  Examining of Correlation Between Demographic Development of Population and Their Travel Behaviour , 2017 .

[29]  Mária Chovancová,et al.  Modeling the Supply Process Using the Application of Selected Methods of Operational Analysis , 2017 .

[30]  Arkadiusz Gola,et al.  Reliability analysis of reconfigurable manufacturing system structures using computer simulation methods , 2018, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

[31]  Jan Ondrus,et al.  Video System as a Psychological Aspect of Traffic Safety Increase , 2017, TST.

[32]  Goran Zovak,et al.  Application of standards in auditing of stations for technical inspection of vehicles , 2009 .

[33]  R. Stasiak-Betlejewska,et al.  Selected Approaches to Change Management and Logistics in Slovak Enterprises , 2018, LOGI – Scientific Journal on Transport and Logistics.

[34]  J. Gnap,et al.  Determination of Time Savings for Passengers by Applying the Public Passenger Transport Preference in Cities , 2018, Communications - Scientific letters of the University of Zilina.

[35]  Z. Kaliniewicz,et al.  Dokumentowanie spełniania wymagań w obszarze bezpieczeństwa technicznego na przykładzie dystrybucji paliw ciekłych , 2017 .