How Observable Is Lithium Plating? Differential Voltage Analysis to Identify and Quantify Lithium Plating Following Fast Charging of Cold Lithium-Ion Batteries
暂无分享,去创建一个
Gregory J. Offer | Monica Marinescu | M. Marinescu | G. Offer | M. Marzook | Ian D. Campbell | Mohamed Waseem Marzook
[1] Michael A. Danzer,et al. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries , 2014 .
[2] W. D. Widanage,et al. A Comparison between Electrochemical Impedance Spectroscopy and Incremental Capacity-Differential Voltage as Li-ion Diagnostic Techniques to Identify and Quantify the Effects of Degradation Modes within Battery Management Systems , 2017 .
[3] Andreas Jossen,et al. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction , 2017 .
[4] Marshall C. Smart,et al. Lithium Plating Behavior in Lithium-Ion Cells , 2010 .
[5] W. Bessler,et al. Low-temperature charging of lithium-ion cells part I: Electrochemical modeling and experimental investigation of degradation behavior , 2014 .
[6] P. Bruce,et al. Degradation diagnostics for lithium ion cells , 2017 .
[7] Jianqiu Li,et al. Investigation of Lithium Plating-Stripping Process in Li-Ion Batteries at Low Temperature Using an Electrochemical Model , 2018 .
[8] Vincent Chevrier,et al. Understanding Anomalous Behavior in Coulombic Efficiency Measurements on Li-Ion Batteries , 2015 .
[9] Shanhai Ge,et al. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells , 2018, Journal of Power Sources.
[10] Geping Yin,et al. Understanding undesirable anode lithium plating issues in lithium-ion batteries , 2016 .
[11] M. Wohlfahrt‐Mehrens,et al. Effects of rest time after Li plating on safety behavior—ARC tests with commercial high-energy 18650 Li-ion cells , 2017 .
[12] Marshall C. Smart,et al. Effects of Electrolyte Composition on Lithium Plating in Lithium-Ion Cells , 2011 .
[13] M. Dubarry,et al. Operando lithium plating quantification and early detection of a commercial LiFePO 4 cell cycled under dynamic driving schedule , 2017 .
[14] John Newman,et al. Two-Dimensional Modeling of Lithium Deposition during Cell Charging , 2008 .
[15] Yunus A. Cengel,et al. Heat and Mass Transfer: Fundamentals & Applications Fourth Edition (Third Printing) , 2013 .
[16] Tsutomu Ohzuku,et al. Formation of Lithium‐Graphite Intercalation Compounds in Nonaqueous Electrolytes and Their Application as a Negative Electrode for a Lithium Ion (Shuttlecock) Cell , 1993 .
[17] Simon F. Schuster,et al. Nonlinear aging characteristics of lithium-ion cells under different operational conditions , 2015 .
[18] Petr Novák,et al. Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .
[19] Hannah M. Dahn,et al. User-Friendly Differential Voltage Analysis Freeware for the Analysis of Degradation Mechanisms in Li-Ion Batteries , 2012 .
[20] Moses Ender,et al. In situ detection of lithium metal plating on graphite in experimental cells , 2015 .
[21] D. Sauer,et al. Parameterization of a Physico-Chemical Model of a Lithium-Ion Battery I. Determination of Parameters , 2015 .
[22] Jiang Fan,et al. Studies on Charging Lithium-Ion Cells at Low Temperatures , 2006 .
[23] M. Wohlfahrt‐Mehrens,et al. Electrochemical, Post-Mortem, and ARC Analysis of Li-Ion Cell Safety in Second-Life Applications , 2017 .
[24] R. Staniewicz,et al. Improved low temperature performance of lithium ion cells with quaternary carbonate-based electrolytes , 2003 .
[25] Andreas Jossen,et al. Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction , 2014 .
[26] H. Gasteiger,et al. Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries , 2017 .
[27] Doron Aurbach,et al. On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries , 1999 .
[28] M. Whittingham,et al. Lithium batteries and cathode materials. , 2004, Chemical reviews.
[29] Craig B. Arnold,et al. Stress evolution and capacity fade in constrained lithium-ion pouch cells , 2014 .
[30] M. Wohlfahrt‐Mehrens,et al. Li plating as unwanted side reaction in commercial Li-ion cells - A review , 2018 .